基于Nafion-氧化石墨烯复合物/硫堇/纳米金构建过氧化氢传感器的研究

利用Nafion(全氟聚苯乙烯磺酸溶液)-氧化石墨烯复合物、硫堇和纳米金构建了H2O2酶传感器。首先将氧化石墨烯分散在体积分数0.2%Nafion溶液中制得Nafion-氧化石墨烯的复合物,并将其固定在玻碳电极表面,通过静电吸附将带正电荷的硫堇吸附到Nafion-氧化石墨烯复合膜修饰的玻碳电极表面,再利用静电吸附将纳米金修饰于电极上,通过纳米金来固定辣根过氧化物酶从而制得H2O2传感器。用循环伏安法和计时电流法考察该修饰电极的电化学特性。H2O2浓度为5.5×10-6~1.0×10-3mol/L时,酶电极的响应电流值与H2O2的浓度呈良好的线性关系,检出限为1.80×10-6mol/L。     

基于碳纳米管-纳米二氧化锰增强的H2O2修饰电极的研制

将碳纳米管(CNT)和纳米二氧化锰(Nano-MnO2)分散在壳聚糖(CHIT)溶液中,用涂敷法固定到玻碳电极表面,制成修饰电极.由于碳纳米管具有良好的电子传递性能,使纳米二氧化锰对H2O2的电催化活性明显提高,通过循环伏安法、计时电流法对传感器的性能进行了研究.在最佳测试条件下,该传感器对H2O2的线性范围为1.5×10-6 ～5.0×10-2 mol/L,检出限为4×10-7 mol/L.用于实际样品的测定,结果满意.     

聚L-酪氨酸/半胱氨酸/纳米金修饰Pt电极固定血红蛋白测定H2O2

制备了聚L-酪氨酸/半胱氨酸/纳米金/血红蛋白修饰Pt电极,并用循环伏安法和交流阻抗法对制备过程进行了表征。还用循环伏安法和计时电流法研究了修饰电极与H2O2的相互作用。结果表明,该电极对H2O2有明显的催化作用,电流与H2O2浓度在3.5×10-7~2.0×10-3mol/L范围内呈线性关系,检出限为1.0×10-7mol/L。     

电聚合茜素黄R构建辣根过氧化物酶传感器的研究

利用电聚合茜素黄R(AYR)的方法,将辣根过氧化物酶(HRP)和细胞色素c(Cyt c)固载于通过一步法电沉积的碳纳米管-金纳米粒子(MWCNTsAu NPs)复合纳米材料修饰电极表面,构筑PAYR-HRP-Cyt c/M WCNTs-Au NPs修饰电极,并利用HRP对H2O2的直接电化学催化行为对H2O2进行检测。采用扫描电镜对MWCNTs-Au NPs和PAYR-HRP-Cyt c的表面形貌进行表征。利用电化学阻抗对修饰电极的构筑过程进行了监测。采用循环伏安法和计时电流法对修饰电极的电化学行为进行了研究。探讨了p H和电位对该修饰电极测定H2O2的性能的影响。该传感器对H2O2在5.0×10-7~3.14×10-3mol/L范围内呈良好的线性响应,相关系数为0.9997,灵敏度为0.50 A·L/mol,检出限(S/N=3)为9.6×10-8mol/L。     

辣根过氧化酶在磁性纳米修饰的离子注入电极上的电化学和电催化行为

辣根过氧化酶(HRP)在Co/NH2/ITO离子注入电极上有一对良好的氧化还原峰,峰电位分别为Epc=-0.2 V,Epa=-0.01 V(vsAg/AgCl)。该修饰电极对H2O2具有催化作用,可以用作H2O2的生物传感器,峰电流与H2O2的浓度分别在1.0×10-10~2.0×10-8mol/L和2.0×10-8~1.0×10-7mol/L范围内呈线性关系,线性回归方程分别为Ip(mA)=2.2986+0.06632c(nmol/L)和Ip(mA)=3.5788+7.3053E-4c(nmol/L),相关系数分别为0.9972和0.9688。检出限为1.0×10-10mol/L。     

铜纳米粒子在碳纳米管上的原位生长及对过氧化氢电催化性能的研究

采用一种温和且有效的方法,将聚丙烯酸非共价修饰到碳纳米管上,并以其为模板,在碳纳米管上原位均匀的生长铜纳米粒子,制备了铜/聚丙烯酸/碳纳米管(Cu/PAA/CNT)纳米复合材料,并以此材料构建了一种新型的非酶H2O2传感器,研究了其对H2O2的电催化行为。结果表明:铜纳米粒子较均匀的生长在碳纳米管上,制备的纳米复合材料修饰到电极表面对H2O2表现出良好的电流响应,可实现对H2O2的灵敏测定,其响应电流与H2O2的浓度在1.9×10-6～8.0×10-4mol/L范围内呈良好的线性关系,检测限达6.3×10-7mol/L。     

基于自组装L-半胱氨酸与纳米金的H2O2生物传感器

通过在金电极表面自组装L-半胱氨酸,再分别吸附纳米金与辣根过氧化物酶(HRP)的方法,成功的制备了H2O2生物传感器.采用循环伏安法考察了传感器的电化学特性,电极对H2O2在浓度为2.1×10-6～3.6×10-3 mol/L的范围内呈线性,检出限为8.9×10-7 mol/L (S/N＝3).该传感器具有稳定性好,线性范围宽,检出限低等优点,同时具有一定的抗干扰能力.     

巯基丁二胺镍(Ⅱ)自组装单分子层H2O2传感器研究

采用巯基丁二胺镍(Ⅱ)(NiL-SH)自组装单分子层修饰金电极,制得测定H2O2的电流型生物传感器.NiL-SH在电极表面有一对可逆的氧化还原峰.传感器对H2O2的还原显示出快速电催化响应(＜10 s),采用电子扫描电镜(SEM)和光电子能谱(XPS)对电极表面进行了表征,且计算了其自身电化学反应性质.研究了各种因素如pH、工作电位等对传感器响应电流的影响.循环伏安法测定H2O2的线性范围为5.0×10-6～3.0×10-3 mol/L(r=0.999),检出限为2.0×10-6 mol/L.该电极显示出模拟酶特性,测定米氏常数KMapp＝2.78 mmol/L.对传感器的稳定性,灵敏度和选择性进行研究,并应用于实际样品测定.     

普鲁士蓝-多壁碳纳米管复合材料修饰电极测定过氧化氢

利用电化学方法在多壁碳纳米管(MWCNT)修饰的玻碳电极表面聚合一层普鲁士蓝(PB)(PB/MWCNT/GCE),制备了一种新型的过氧化氢(H2O2)传感器。研究了该传感器对H2O2的电催化作用。讨论了支持电解质种类、酸度、修饰层厚度、电位和扫速等对H2O2响应的影响。研究表明,该传感器在以1.0mol/L KCl为支持电解质的磷酸盐溶液(pH=2.0)中,对H2O2具有明显的催化效应,测定的线性范围变宽,在2.9×10-6~8.8×10-2mol/L范围内还原峰电流与H2O2的浓度呈良好的线性关系,相关系数为0.9949;检出限为1.4×10-6mol/L。该电极用于医用消毒水中H2O2的测定,结果令人满意。     

壳聚糖/Nafion膜固定氯化血红素制备过氧化氢生物传感器

以壳聚糖/Nafion复合膜为载体在玻碳电极上固定氯化血红素制备过氧化氢生物传感器。研究了血红素电极制备过程中的影响因素及其电化学性质,在1.0 mol/L pH 9.8的NH3-NH4Cl缓冲溶液中,血红素电极对H2O2的催化还原峰电流与H2O2浓度在7.5×10-5~1.45×10-3mol/L范围内成良好的线性关系,检测灵敏度为35.28μA/mM,检测限为3.5×10-5mol/L(S/N=3),同时研究了血红素电极的重现性、稳定性和选择性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.