聚乙烯中炭黑含量不同测试方法的探讨

采用GB 13021《聚乙烯管材和管体炭黑含量测定(热失重法)》和热重分析仪法两种方法测定了聚乙烯中炭黑含量。对两种方法的测定结果进行了比较,结果表明,两种方法均有良好的重复性和准确度,测定结果基本一致,采用不同方法得到的测定结果间可以相互参考。     

Misclassification rates,critical values and size of the design in measurement systems capability studies

Measurement systems capability analysis aims to test if the variability of a measurement system is small relative to the variability of a monitored process. At present some open questions are related both to the interpretation of the critical values of the indices typically used by practitioners to assess the capability of a gauge and to the choice of the size of the experimental design to test the repeatability and the reproducibility of the measurement process. In this paper, starting from the misclassification rates of a measurement system, we present a solution to these issues. Copyright © 2009 John Wiley & Sons, Ltd.     

Static SIMS–VAMAS interlaboratory study for intensity repeatability,mass scale accuracy and relative quantification

An interlaboratory study involving 19 time‐of‐flight static secondary ion mass spectrometer (TOF‐SSIMS) instruments from 12 countries has been conducted. Analysts were supplied, by the National Physical Laboratory, with a protocol for analysis together with three reference materials: poly(tetrafluoroethylene), a thin layer of polycarbonate on a silicon wafer and a patterned sample with different amounts of Irganox 1010 in each of four quadrants on a silicon wafer. The objectives of the study are (i) to determine the repeatability and constancy of the relative intensity scale achievable using the draft ISO standard (DIS 23830), (ii) to evaluate the effectiveness of mass scale calibration and optimisation procedure and (iii) to evaluate the current capability of relative quantification using SSIMS. The results of this study show that the constancy of the relative intensity scale has an approximate scatter standard deviation of only 5%. This is excellent and demonstrates that SSIMS measurements are significantly more stable than often thought by analysts. The draft ISO standard (DIS) CD 13084 for calibration of the mass scale in TOF‐SIMS was evaluated and found to be consistent with our previous study. Four laboratories optimised the instrument mass calibration accuracy using this procedure leading to improvements in mass scale calibration by factors of 1.8, 2.2, 2.3 and 8.6. Using a novel patterned Irganox sample it is shown that the precision of relative quantification may be as good as a standard deviation of only 5% for 16 instruments—this is a remarkable result. Further work is required to develop more robust reference materials. © Crown copyright 2010. Reproduced with the permission of Her Majesty's Stationery Office. Published by John Wiley & Sons, Ltd.     

三维轮廓扫描法测量透镜曲率半径的实验研究

三维轮廓扫描方法可通过连续扫描透镜表面三维空间形貌,拟合得到其曲率半径值。该方法具有测量精度高、可任意选定测量区域、测量力微弱、对光学表面划伤可忽略等优点。通过实验,研究了三维轮廓扫描法测量透镜曲率半径的精度,并分析了测量区域大小、扫描间距等因素对测量精度的影响。实验结果表明,该方法测量凸、凹球面透镜的曲率半径的相对重复性可达到110-6。     

On the improvement of signal repeatability in laser-induced air plasmas

The relatively low repeatability of laser-induced breakdown spectroscopy (LIBS) severely hinders its wide commercialization. In the present work, we investigate the optimization of LIBS system for repeatability improvement for both signal generation (plasma evolution) and signal collection. Timeintegrated spectra and images were obtained under different laser energies and focal lengths to investigate the optimum configuration for stable plasmas and repeatable signals. Using our experimental setup, the optimum conditions were found to be a laser energy of 250 mJ and a focus length of 100 mm. A stable and homogeneous plasma with the largest hot core area in the optimum condition yielded the most stable LIBS signal. Time-resolved images showed that the rebounding processes through the air plasma evolution caused the relative standard deviation (RSD) to increase with laser energies of > 250 mJ. In addition, the emission collection was improved by using a concave spherical mirror. The line intensities doubled as their RSDs decreased by approximately 25%. When the signal generation and collection were optimized simultaneously, the pulse-to-pulse RSDs were reduced to approximately 3% for O(I), N(I), and H(I) lines, which are better than the RSDs reported for solid samples and showed great potential for LIBS quantitative analysis by gasifying the solid or liquid samples.     

紫外可见及二极管阵列检测器高效液相色谱仪检定时常见问题及解决方法

按照国家计量检定规程,分析了检定紫外-可见及二极管阵列检测器高效液相色谱仪的主要计量指标时常见问题和产生的原因,并提出了解决方法。     

用平行双样测定结果相对偏差限值评估方法验证实验重复性限合理性的研究

分析方法标准验证实验得到的分析方法基本性能参数重复性限和再现性限是日常检测工作质控规范重要依据。以环境监测领域土壤、沉积物及固废样品中无机元素分析为例,考察了已颁布执行的标准文本和在生态环境部官网公开征求意见的分析方法标准中重复性限。将重复性限转化为相对偏差后,与日常检测工作中质控限值进行了比较。根据目前现行有效的平行双样测定结果相对偏差限值,方法验证数据有多大比例符合质控要求？根据方法验证结果,平行双样测定结果相对偏差限值有无改进可能？从上述两个角度进行了研究。研究结果表明：土壤、沉积物、固体废弃物中无机元素的测定,不同文献来源相同分析方法标准和不同分析方法标准,其重复性限转化得到的平行测定相对偏差合格率存在明显区别;用平行测定相对偏差限值可以快速判断标准文本中的重复性限是否合理,审核方法验证数据质量是否满足要求。基于已有标准文本方法验证数据,探讨了修改平行测定结果相对偏差限值可行性。     

Effects of digital processing on repeatability assessment of a multiple reaction monitoring liquid chromatography–tandem mass spectrometry system by ISO 11843-7

ISO 11843 part 7 (ISO 11843-7) can provide a standard deviation (SD) of area measurements of a target peak through the stochastic behaviors of instrumental noises. The purpose of this study is to demonstrate that ISO 11843-7 can be applied to assess repeatability in an isocratic liquid chromatography–tandem mass spectrometry (LC–MS/MS) system without repetitive measurements. The relative standard deviation (RSD) of the peak area of ergosterol picolinyl ester, which was used as an example, on a multiple reaction monitoring (MRM) chromatogram was determined by ISO 11843-7. The RSD by ISO 11843-7 (N = 1) was within a 95% confidence band of the RSD by repetitive measurements (N = 6). Moreover, the effects of digital smoothing, such as moving average, were also examined on the repeatability assessment in LC–MS/MS by ISO 11843-7. From the results of the comparisons of the RSDs obtained by ISO 11843-7 and the repetitive measurements, it was shown that suitable RSDs of the peak area were obtained from the smoothed MRM chromatograms by the moving average for narrow data point windows (e.g., one-sixth of the peak width). In conclusion, the utility of repeatability assessment based on ISO 11843-7 has been expanded for the validation of an LC–MS/MS system.     

High Precision Titrimetry,Ion Chromatography and ICP-Optical Emission Spectrometry for the Estimation of Inhomogeneities in Aqueous Calibration Solutions for Metrological Purposes

The homogeneity of samples intended for metrological intercomparison studies must be granted without ambiguity. This holds equally true for aqueous solutions for which the determination of between-bottle variations requires measurement techniques with extremely high precision. Therefore measurement series were designed for automated analysis techniques such as titrimetry, optical emission spectrometry and ion chromatography which offer very high precision of results. Between-bottle relative standard deviations (RSD) of at best 0.008% were obtained with titrimetry. With optical emission spectrometry and ion chromatography, between-bottle RSDs of 0.02% and 0.05% were obtained. The contributions from these measurements were included in a conservative approach to the uncertainty budgets of the gravimetrical reference values for the analytes in the samples.     

高精度应变式引伸计的研究

大量程引伸计的弹性元件处于大变形工伯状态，引伸计的非线性矛盾较突出。实验研究表明，某些结构的弹性元件，其线性度与结构的组合尺寸有关，存在着最佳线性条件，根据最佳条件和对夹持机构的考虑，设计了两种新型高精度引伸计。