Pigeon Pea Husk for Removal of Emerging Contaminants Trimethoprim and Atenolol from Water

The pace of industrialization and rapid population growth in countries such as India entail an increased input of industrial and sanitary organic micropollutants, the so-called emerging contaminants (EC), into the environment. The emission of EC, such as pharmaceuticals, reaching Indian water bodies causes a detrimental effect on aquatic life and ultimately on human health. However, the financial burden of expanding sophisticated water treatment capacities renders complementary, cost-efficient alternatives, such as adsorption, attractive. Here we show the merits of washed and milled pigeon pea husk (PPH) as low-cost adsorbent for the removal of the EC trimethoprim (TMP) and atenolol (ATN) that are among the most detected pharmaceuticals in Indian waters. We found a linear increase in adsorption capacity of PPH for TMP and ATN at concentrations ranging from 10 to 200 μg/L and from 50 to 400 μg/L, respectively, reflecting the concentrations occurring in Indian water bodies. Investigation of adsorption kinetics using the external mass transfer model (EMTM) revealed that film diffusion resistance governed the adsorption process of TMP or ATN onto PPH. Moreover, analysis of the adsorption performance of PPH across an extensive range of pH and temperature illustrated that the highest adsorption loadings achieved concurred with actual conditions of Indian waters. We anticipate our work as starting point towards the development of a feasible adsorbent system aiming at low-cost water treatment.     

水火箭的制作与发射——初中物理教学课外活动拓展

物理课外实验能让学生真正动手操作、体验,从而提高学生的物理核心素养.水火箭的制作与发射,蕴含知识面广,发射效果震撼,能让学生对物理与科技的联系有直观深刻的认识.     

14.5GHz紧凑型、低成本、全永磁ECR离子源

A compact 14.5GHz electron cyclotron resonance (ECR) ion source for the production of slow, multiply charged ions has been constructed,with the plasma-confining magnetic field produced exclusively by permanent magnets.Microwave power of up to 175W in the frequency range from 12.75 to 14.SGHz is transmitted from ground potential via a PTFE window into the water-cooled plasma chamber which can be equipped with an aluminum liner.The waveguide coupling system serves also as biased electrode,and two remotely-controlled gas inlet valves connected via an insulating break permit plasma operation in the gas- mixing mode.A triode extraction system sustains ion acceleration voltages between 1kV and 10kV.The ECR ion source is fully computer-controlled and can be remotely operated from any desired location via Ethernet.     

Recycling Chocolate Aluminum Wrapping Foil as to Create Electrochemical Metal Strip Electrodes

The development of low-cost electrode devices from conductive materials has recently attracted considerable attention as a sustainable means to replace the existing commercially available electrodes. In this study, two different electrode surfaces (surfaces 1 and 2, denoted as S1 and S2) were fabricated from chocolate wrapping aluminum foils. Energy dispersive X-Ray (EDX) and field emission scanning electron microscopy (FESEM) were used to investigate the elemental composition and surface morphology of the prepared electrodes. Meanwhile, cyclic voltammetry (CV), chronoamperometry, electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were used to assess the electrical conductivities and the electrochemical activities of the prepared electrodes. It was found that the fabricated electrode strips, particularly the S1 electrode, showed good electrochemical responses and conductivity properties in phosphate buffer (PB) solutions. Interestingly, both of the electrodes can respond to the ruthenium hexamine (Ruhex) redox species. The fundamental results presented from this study indicate that this electrode material can be an inexpensive alternative for the electrode substrate. Overall, our findings indicate that electrodes made from chocolate wrapping materials have promise as electrochemical sensors and can be utilized in various applications.     

Removal of methylene blue by seed-watermelon pulp-based low-cost adsorbent: Study of adsorption isotherms and kinetic models

Based on the abundance of seed-watermelon pulp (SWP) in Xinjiang, China, SWP was employed to prepare low-cost adsorbent toward the removal of methylene blue (MB). The effects of contact time at different initial concentration were studied. The widely used adsorption isotherm models including Langmuir, Freundlich, and Temkin isotherms were employed to depict the adsorption process. The Langmuir isotherm was best fitted to the experimental data. Batch kinetic studies showed that an equilibrium time of 300 minutes was needed for the adsorption. The adsorption properties can be well described by pseudo-second-order kinetic model and the MB uptake was not controlled by intraparticle diffusion mechanism.     

Accurate equilibrium inversion barrier of ammonia by extrapolation to the one-electron basis set limit

A scheme based on treating uniform singlet-pair and triplet-pair interactions is suggested to extrapolate electron correlation energy of ammonia, calculated at two basis-set levels of ab initio theory in the infinite one-electron basis-set limit. The dual-level method is tested on the extrapolation of the full correlation in coupled-cluster singles and doubles and in the case also a noniterative perturbative correction for connected triple energies for the C3v and D3h structures of ammonia, with correlation-consistent basis sets of the type cc-pVXZ （X = D, T, Q, 5, 6） and aug-cc-pVXZ （X = D, T, Q, 5）. For testing and comparison purposes, the energies reported by Klopper [J. Comput. Chem. 22 1306 （2001）] have been taken. From a corresponding extrapolation of CCSD（T）/AVXZ energies for X = 4, 5, we obtain total inversion barriers of 1833.87 cm-1/1832.33 cm^-1 for the two/three-parameter extrapolation rules, which are in good agreement with other theoretical extrapolation and empirical values in the literature.     

Itaconic copolymer modified loess for high-efficiently removing copper ions from wastewater

Using Loess of clay (LC) which is low-cost, highly hydrophilic and small granule materials, biocompatible itaconic acid (IA), 2-hydroxyethyl methacrylate (HEMA) and N-vinyl-2-pyrrolidone (NVP) as functional monomers, a novel biocompatible polymer composite adsorbent (LC/PIHN) was prepared by in-situ copolymerization. It was applied to remove copper ions from wastewater, and the mechanism of adsorption was investigated. It showed that the Cu(II) removal was more than 99.8% at room temperature. The adsorption kinetics and isotherms of LC/PIHN fit the pseudo-second-order model and the Freundlich model, respectively. In summary, LC/PIHN is a kind of biocompatible, low-cost and excellent polymer composite adsorbent for removing heavy metal ions from wastewater.     

基于递推最小二乘的在线罗差校正方法

现有罗差校正方法不同程度地存在着需要精确控制采样点、校正结果受噪声影响大、不能实现现场环境下的在线校正等问题。针对这一问题,设计了一种基于递推最小二乘的在线罗差校正方法。介绍了罗差校正的基本原理,推导了基于递推最小二乘罗差校正的实现过程,设计了转台试验及车载试验进行验证分析。两次转台试验中,罗差校正前后系统航向角误差标准差分别由30.9418°与3.2407°降低至3.8861°与1.2964°;车载试验中,车辆仅需原地转圈即可实现罗差校正,15 min跑车结果显示,校正后航向角误差标准差由17.2037°降低至2.8818°。试验结果表明,该罗差校正方法简单易用,可应用于现场在线校正,相比传统方法高效、稳定。     

Quenching Behavior of the Electrochemiluminescence of Ru(bpy)32+/TPrA System by Phenols on a Smartphone-Based Sensor

Phenolic compounds such as vanillic and p-coumaric acids are pollutants of major concern in the agro-industrial processing, thereby their effective detection in the industrial environment is essential to reduce exposure. Herein, we present the quenching effect of these compounds on the electrochemiluminescence (ECL) of the Ru(bpy)₃²⁺/TPrA (TPrA=tri-n-propylamine) system at a disposable screen-printed carbon electrode. Transient ECL profiles are obtained from multiple video frames following 1.2 V application by a smartphone-based ECL sensor. A wide range of detection was achieved using the sensor with limit of detection of 0.26 μM and 0.68 μM for vanillic and p-coumaric acids, respectively. The estimated quenching constants determined that the quenching efficiency of vanillic acid is at least two-fold that of p-coumaric acid under the current detection conditions. The present ECL quenching approach provided an effective method to detect phenolic compounds using a low-cost, portable smartphone-based ECL sensor.     

晶种法高效合成低硅铝比LSX型分子筛

分别以工业级的偏铝酸钠和水玻璃为铝源和硅源,氢氧化钠为主要碱源,氢氧化钾为辅助碱源,采用LSX晶种法制备了LSX型分子筛。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线荧光(XRF)、傅里叶变换红外光谱(FTIR)和N2吸附-脱附等表征方式考察了有无晶种、钾钠物质的量之比、晶化条件对合成LSX型分子筛的影响。结果表明,加入LSX晶种不仅能显著缩短晶化时间,提高分子筛的结晶度,还可有效抑制方钠石和A型杂晶的伴生;钾钠比过高或过低均会造成A型或方钠石型杂晶的伴生;直接进行高温晶化会导致亚稳态的LSX型分子筛向热力学稳定相转变;延长老化时间或高温晶化处理降低了产物中的硅铝比;样品的比表面积和N2吸附量随老化时间的延长和高温晶化处理而逐渐下降。