碰撞气体的种类和压力对离子阱质谱性能的影响

基于数字离子阱技术,研究了离子阱质谱分析实验过程使用的碰撞气体种类及压力对离子阱质谱性能,如质量分辨能力、信号强度、串级质谱分析,以及低质量截止效应等的影响.实验过程中,在离子的激发和碰撞诱导解离阶段,分别采用质量数不等的氦气(质量数=4 amu)、氮气(质量数=28 amu)、氩气(质量数=40 amu)等作为碰撞气体,以及不同的气体压力,研究了它们对质谱性能的影响.结果表明,当采用质量数较大的氩气作为碰撞气体时,可以有效改善低质量数截止效应和提高离子碰撞过程中的能量转移效率,同时提高离子捕获和解离效率,但是质量分辨率会明显降低.在获得较高质量分辨率方面,氦气作为碰撞气体时效果最好.在气压相同的情况下,质量数大的碰撞气体有利于提高串级质谱分析效率,即获得更多碎片离子峰和更多有关母体离子结构的信息.     

Viscous waves and wave-structure interaction in a tank using adapting quadtree grids

Viscous waves and waves over a submerged cylinder in a stationary tank are simulated using a volume-of-fluid numerical scheme on adaptive hierarchical grids. A high resolution interface-capturing method is used to advect the free surface interface and the Navier–Stokes equations are discretised using finite volumes with collocated primitive variables and solved using a Pressure Implicit with Splitting of Operators (PISO) algorithm. The cylinder is modelled by using the technique of Cartesian cut cells. Results of flow of a single fluid past a cylinder at Reynolds number Re=100 are presented and found to agree well with experimental and other numerical data. Viscous free surface waves in a tank are simulated using uniform and quadtree grids for Reynolds numbers in the range from 2 to 2000, and the results compared against analytical solutions where available. The quadtree-based results are of the same accuracy as those on the equivalent uniform grids, and retain a sharp interface at the free surface while leading to considerable savings in both storage and CPU requirements. The nonlinearity in the wave is investigated for a selection of initial wave amplitudes. A submerged cylinder is positioned in the tank and its influence on the waves as well as the hydrodynamic loading on the cylinder is investigated.     

Emulsions of Heavy Crude Oils. II. Viscous Responses and Their Influence on Emulsion Stability Measurements

The stability of 30 heavy crude oil emulsions was studied in a parallel-plate laboratory coalescer (DC field). Particularly, viscous responses and their influence on the emulsion stability measurements were investigated. In addition to highlighting previous results from the same experimental setup and discussing these based on recent experience, new results at different temperatures and volume fractions of water were presented. A new semi-empirical model for the characteristic time of the destabilization process was presented. The electrical forces were modelled with a point-dipole approximation and the hydrodynamic resistance to droplet transport was modelled with an empirical term including the logarithmic viscosity of the oil phase. The new model clearly performed much better than the previous model, particularly for very viscous crude oils. Studies of the performance of industrial electrocoalescers have showed that simple electrostatic theory can potentially explain complex separation phenomena when the resistance to the coalescence step is reduced by an efficient demulsifier. The ultimate goal is to build a model for both the laboratory setup and the industrial coalescer so that laboratory experiments can be used to predict the behavior of the industrial process.     

A three‐dimensional Cartesian cut cell method for incompressible viscous flow with irregular domains

A three‐dimensional Cartesion cut cell method is presented for the simulations of incompressible viscous flows with irregular domains. A new model (referred to as ‘6+N’ model) is proposed to describe arbitrarily shaped cut cells and treat all the cells as polyhedrons with 6+N faces. The finite volume discretization of the Navier–Stokes equation is then implemented by using the ‘6+N’ model to separate the surface flux integrals into two parts, that is, the fluxes through the basic face of the hexahedron and those through the cutting surfaces. The previously proposed Kitta Cube algorithm and volume computer‐aided design platform (J. Comput. Aided. Des. 2005; 37(4): 1509–1520. Doi:10.1016/j.cad.2005.03.006) are adopted to generate cut cells and provide shape data and physical attributes for the numerical analysis. A modified SIMPLE‐based smoothing pressure correction scheme is applied to suppress checkerboard pressure oscillations caused by the collocated arrangement of velocities and pressure. The calculation accuracy of the numerical method expressed by L₁ and L _∞ norm errors is first demonstrated by the simulation of a pipe flow. Then its feasibility, efficiency, and potential in engineering applications are verified by applying it to solve natural convections between concentric spheres and between eccentric spheres. The heat transfer patterns in eccentric spheres are also obtained by using the numerical method. Copyright © 2011 John Wiley & Sons, Ltd.     

On the cut‐off phenomenon for the transitivity of randomly generated subgroups

Consider K ≥ 2 independent copies of the random walk on the symmetric group S_N starting from the identity and generated by the products of either independent uniform transpositions or independent uniform neighbor transpositions. At any time $n\in \mathbb{N}$, let G_n be the subgroup of S_N generated by the K positions of the chains. In the uniform transposition model, we prove that there is a cut‐off phenomenon at time N ln(N)/(2K) for the non‐existence of fixed point of G_n and for the transitivity of G_n, thus showing that these properties occur before the chains have reached equilibrium. In the uniform neighbor transposition model, a transition for the non‐existence of a fixed point of G_n appears at time of order $N^{1+\frac{2}{K}}$ (at least for K ≥ 3), but there is no cut‐off phenomenon. In the latter model, we recover a cut‐off phenomenon for the non‐existence of a fixed point at a time proportional to N by allowing the number K to be proportional to ln(N). The main tools of the proofs are spectral analysis and coupling techniques. © 2011 Wiley Periodicals, Inc. Random Struct. Alg., 2012     

关于具有二次相关性收获率的捕食与被捕食系统极限环的存在性分析

讨论了一类两种群具有二次相关性收获率的捕食与被捕食系统,利用常微分定性方法和分支理论,得到了系统平衡点处的性态和极限环的存在性条件,并用Matlab软件对其进行数值模拟,推广了相关文献中两种群捕食模型定性分析的相应结论.     

叶丝在增温增湿与滚筒烘丝工序中香味组分变化分析

该文研究了制丝线增温增湿和滚筒烘丝工序加工对叶丝香味组分的影响,采用溶剂超声萃取前处理结合GC-MS法测定叶丝的香味组分,并对SIROX增温增湿工序和滚筒烘丝工序前后叶丝香味组分的相对含量进行了分析,比较了工序前后、工序间香味组分的变化趋势。结果显示:①经SIROX增温增湿工序加工后,乙酸、苯甲醇等18种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等6种组分相对含量增加;②经滚筒烘丝工序加工后,乙酸、麦芽酚等14种组分相对含量减少,糠醇、糠醛等6种组分相对含量增加;③经增温增湿及滚筒烘丝两工序后,乙酸、2,3-丁二醇等23种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等4种组分相对含量增加;④两工序间的温度、湿度剧烈变化,使叶丝内部组分发生了美拉德反应、降解反应、挥发等,香味组分经两个工序后发生了一系列显著变化。该研究对提升卷烟产品质量、优化工艺参数、开发高质量产品具有重要意义。     

A novel algorithm for branch cut phase unwrapping

Branch cut method is a powerful noise-immune algorithm for correct phase unwrapping of noisy phase maps. The shortest branch cut length promises the optimal unwrapping result of the wrapped phase maps. A new algorithm is proposed to search for the shortest branch cut length by simple exchange operation. Although the algorithm is on the basis of stochastic search techniques, it has a high probability of finding the shortest branch cut length or an approximation of it. Compared with the traditional algorithms, the algorithm is fast and competitive.     

温度对分光光度法测定超滤膜性能的影响

以分光光度法中的碘沉淀法为实验体系, 取聚乙二醇(PEG)为标准物质, 考察温度变化对分光光度法测定超滤膜截留分子质量、平均孔径以及孔径分布的影响. 结果表明, 当各个分子质量的PEG质量浓度一定时, 随着温度升高, 其吸光度减小. 温度对高质量浓度区间(>4mg?L-1)PEG吸光度的影响较大, 以PEG宽质量浓度区间(2~10mg?L-1)作标准曲线为基准, 温度升高时, 所测膜截留分子质量显著增加, 平均孔径增大, 膜孔径分布变宽. 温度对低质量浓度范围(<4mg?L-1) PEG吸光度的影响较小, 以PEG低质量浓度区间作标准曲线为基准, 各个温度条件下所测膜截留分子质量、平均孔径及膜孔径分布基本不变. 通过配制低质量浓度PEG溶液作标准曲线或将PEG渗透液稀释到低质量浓度区间进行吸光度测试可减小温度对分光光度法测定超滤膜性能的影响.     

SiC单晶刻划过程的脆塑性转变特征研究

SiC单晶化学性能稳定、导热系数高、热膨胀系数小、耐磨性能好,广泛用于大功率器件产业.但由于其材料的硬度很大,加工非常困难.脆性材料塑性域加工为提高该类材料的表面质量,降低加工时间和成本提供了有效的途径.本文采用不同刀具角度和刀尖圆弧半径的单点金刚石刀具对4H-SiC单晶进行刻划实验,利用声发射、摩擦力传感器来监测刻划过程中声发射信号强度以及摩擦力的变化,并通过Leica DCM3D以及SEM观察划痕沟槽表面形貌、切屑状态,综合分析以获得4H-SiC单晶在不同角度、刀尖圆弧半径下塑脆转变的临界切削深度.结果表明,增大刀具角度有利于塑性域加工;在相同条件下,刀尖圆弧半径越大,临界切削深度越大.