The effect of polyvinyl alcohol (PVA) on the optical,electrical and solid state properties of copper zinc tin sulfide (CZTS) deposited by sensitive spray pyrolysis (SSP)

Recently, the use of CZTS as the basis for other generation of low cost thin films solar cells has stimulated further researches. Its excellent p-type absorber nature, relatively high absorption coefficient and ideal energy band-gap of 1.5eV motivated these efforts. Additionally, CZTS consist of earth-abundant, cheap and non-toxic elements with very low manufacturing cost. Initially, copper indium gallium selenide (CIGS) solar cell device emerged but suffered limitations in further development because of rare indium and gallium in the device structure therefore, CZTS is recently preferred as an alternative to CIGS commercial solar cell absorber layer. In this work, solution mixture of CZTS and PVA was deposited on a substrate at temperature of 150 °C. Sensitive spray pyrolysis was used to grow the thin films where calculated amount of the precursor mixture was allowed to fall and be deposited on a heated substrate to form CZTS/PVA thin films. Subsequently, the thin film samples were annealed at a temperature of 200^oCfor 1 h to achieving pure crystalline thin film formation. SEM, XRD analysis, Optical, Solid State properties and Raman analysis were studied. The XRD analysis showed that the thin films fell into the pure kesterite structure of CZTS. Results show that produced thin films exhibited higher absorption coefficient and optical conductivity than pure CZTS, 10⁶ m^?1 and 10¹⁴(S^?1) against 10⁴cm^?1 and 10¹²(S^?1) respectively. The band-gap is between 1.53eV and 1.73eV. Using a PVA concentration of 0.05 M yielded highest absorbance and optical conductivity with lowest real dielectric constant and transmittance. These improved optical, electrical and solid state properties suitably qualify these thin films as absorber layer material for solar cell applications.     

Green synthesis and physical properties of crystalline silica engineering nanomaterial from rice husk (agriculture waste) at different annealing temperatures for its varied applications

Crystalline nano silica (SiO₂) was synthesized using a cost-effective eco-friendly method from agricultural waste material like rice husk. Polymer nanocomposite has been prepared using the sol-gel technique from crystalline nano silica using PVA as a polymer binder. Thermal analysis measurement is employed to investigate thermal stability. The XRD analysis shows the crystalline nature of silica is revealed to have characteristic peaks of SiO₂. The particle size was evaluated using Schererr's formula and found to be in the range of 21–31 nm. FTIR measurement shows the presence of O–Si–O (silane) bond formation. The PL measurement shows broad excitation prominently in the visible region. In the XRD pattern, a major peak of the Nanocomposite is observed at an angular position of 19.5° degree, which is more prominent than that of the PVA with the addition of 0.2 wt percent Nano silica to the PVA composite. SEM provides information on homogeneous distribution. This could be beneficial in terms of higher mechanical qualities as well as multifunctional properties. By hydrogen bonding, the PVA molecules are strongly linked to each SiO₂ nanoparticle as measured by FTIR. The stability of materials is confirmed by Zeta Potential and DLS. In the photoluminescence property of SiO₂-PVA crystalline Nano silica composite is excited using a radiation wavelength of 200 nm. The indirect bandgap was determined to be 4.28 eV which could be attributed to the 1100 °C annealing temperature. Such materials may be used as a semiconductor material obtained from a direct natural source, rice husk. Thus, in the present research structural, physical, and optical properties of crystalline nano silica and its polymer composite are explored, which leads us to prepare technological grads material from agricultural waste for varied applications including Agriculture to medical science.     

Impact of the Type of Crosslinking Agents on the Properties of Modified Sodium Alginate/Poly(vinyl Alcohol) Hydrogels

Here, we report on studies on the influence of different crosslinking methods (ionic and chemical) on the physicochemical (swelling ability and degradation in simulated body fluids), structural (FT-IR spectra analysis) and morphological (SEM analysis) properties of SA/PVA hydrogels containing active substances of natural origin. First, an aqueous extract of Echinacea purpurea was prepared using a Soxhlet apparatus. Next, a series of modified SA/PVA-based hydrogels were obtained through the chemical crosslinking method using poly(ethylene glycol) diacrylate (PEGDA, M_n = 700 g/mol) as a crosslinking agent and, additionally, the ionic reaction in the presence of a 5% w/v calcium chloride solution. The compositions of SA/PVA/E. purpurea-based hydrogels contained a polymer of natural origin—sodium alginate (SA, 1.5% solution)—and a synthetic polymer—poly(vinyl alcohol) (PVA, M_n = 72,000 g/mol, 10% solution)—in the ratio 2:1, and different amounts of the aqueous extract of E. purpurea—5, 10, 15 or 20% (v/v). Additionally, the release behavior of echinacoside from the polymeric matrix was evaluated in phosphate-buffered saline (PBS) at 37 °C. The results indicate that the type of the crosslinking method has a direct impact on the release profile. Consequently, it is possible to design a system that delivers an active substance in a way that depends on the application.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Role of PVA in synthesis of nano Co3O4‐decorated graphene oxide

Polymeric materials have been found to be ideal candidates for the synthesis of organic–inorganic nanomaterials. We have obtained Co₃O₄‐decorated graphene oxide (GO) nanocomposites by a simple polymer combustion method. Polyvinyl alcohol (PVA) of two different molecular weights, 14,000 and 125,000, was used for the synthesis. The pristine sample was annealed at 300, 500, and 800°C. PVA has played an important role in the formation of GO and Co₃O₄ nanoparticles. Synthesized Co₃O₄–GO nanocomposites were characterized by X‐ray diffraction, Fourier transform infrared, Raman, electron paramagnetic resonance, transmission electron microscopy, and vibrating sample magnetometry. Reflection peaks at 12° and 37° in an X‐ray study confirm the formation of Co₃O₄–GO. Raman study validates the presence of GO in nanocomposites of Co₃O₄–GO. Room temperature ferromagnetism was observed in all annealed samples. The highest coercivity of 462 G was observed for 300°C annealed samples as compared with bulk Co₃O₄. On the basis of the results obtained, a mechanism of formation is proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

GO/PVA nanocomposites with significantly enhanced mechanical properties through metalion coordination

In this study, a simple and efficient way is demonstrated to create strong interfacial interaction between graphene oxide(GO) filler and poly(vinyl alcohol)(PVA) matrix through metal ion coordination. The coordination bonding provides efficient load transfer during the tensile process, and enhances the mechanical properties of the nanocomposites significantly. After being coordinated with Cu(Ⅱ) ions, GO/PVA composites show much higher Young's moduli and yield stresses than pure PVA and noncoordinated GO/PVA. UV–vis and FTIR spectra are performed to confirm the successful coordination between GO and PVA. Ethylene diamine tetraacetic acid disodium salt(EDTA-2 Na) is used to confirm the important role of coordination in enhancing the composites. This research provides a new approach to manufacture polymer-matrix nanocomposites with significantly improved mechanical performances.     

Thermal properties stability of UV irradiated PVA nanohybrid composites

Zn‐Al‐salicylic nanohybrid layers have been prepared and used as fillers for polyvinyl alcohol (PVA). Nanohybrid layers of a broad absorption area in UV region were completely and uniformly dispersed in a continuous polymer matrix. PVA and PVA nanohybrid composite (NHC) films were exposed to UV irradiation. Thermal properties (diffusivity, effusivity, and conductivity) of both have been measured through photoacoustic technique before and after UV irradiation. Thermal parameters of PVA suffered from a quick deterioration with UV exposure due to reduction of the phonon mean free path as a result of molecular chain scissions. However, significant stability in such parameters of NHC has been obtained under the influence of UV irradiation. This thermal properties stability may be an important step on the way of obtaining photostable polymer NHC. Copyright © 2012 John Wiley & Sons, Ltd.     

Free volume related fluorescent behavior in electron beam irradiated chalcone doped PVA

Effect of electron irradiation on the free volume related microstructural and optical properties of chalcone doped Poly(vinyl alcohol) composite films have been studied using FTIR, UV-Visible, XRD and Positron Annihilation techniques. The FTIR spectral study shows that the irradiation induces the crosslinking within the composite. Using UV-Visible absorption spectra the optical energy band gap and activation energies were estimated and the variation of these parameters suggests the existence of defects and molecular ordering within the irradiated composite. XRD diffractograms reveal that the crosslinking enhances the crystallinity of the sample. In this cross-linked polymer composite the fluorescence enhancement has been observed in the fluorescence spectral study. The Positron annihilation result suggests that the irradiation affects the free volume properties and crosslinking hinders the chalcone chromophore molecular rotation. Under this restricted condition the chromophore molecules likely to emit enhanced fluorescence and its mobility is directly related to the free volume around it.     

抗菌淀粉-聚乙烯醇水凝胶的制备及性能

以环氧氯丙烷为键合剂将胍盐低聚物（PHMG）接枝到淀粉分子上,设计了正交试验优化接枝反应条件。将产物添加到淀粉和聚乙烯醇（PVA）水溶液中,采用化学交联法合成了具有抗菌性能的淀粉-聚乙烯醇（S-PVA）水凝胶,测试了水凝胶的溶胀率、脱水率以及抗菌性能。结果表明：当反应温度为40°C、时间为0.5 h、pH为9时,PHM...     

化学交联聚乙烯醇改性纤维素碱性阴离子交换复合膜的制备与性能

高稳定性碱性阴离子交换膜的制备已成为碱性固体电解质膜研究领域的一大热点.本文通过聚乙烯醇化学交联改性制备出了季铵化羟乙基乙氧基纤维素碱性阴离子交换膜（PVA/QHECE）.采用傅里叶变换红外（FTIR）光谱、热重（TG）分析、交流（AC）阻抗等方法考察了复合膜的分子结构、热稳定性、耐碱稳定性及离子电导率等性能.详尽考察了交联时间、交联剂含量、聚合物组成对成膜力学强度、含水率以及OH^-电导率的影响.实验结果表明:随着交联时间的增加,膜的溶胀率降低,力学强度随之增强,而离子电导率随膜含水率的降低没有发生明显变化,室温下OH^-的电导率在3.26×10^-4-4.44×10^-4S·cm^-1范围内变化.热重分析结果显示:掺入42.9%的QHECE时,膜的热分解温度达260℃.此外,将PVA/QHECE膜在6 mol·L^-4 KOH浓碱溶液中80℃浸渍处理168 h,膜的电导率从4.90×10^-4S·cm^-1提高到9.68×10^-4S·cm^-1,而膜的外观和力学强度以及含水率未发生明显变化,这一结果表明该膜具有很好的耐碱化学稳定性,有望作为一种新型的碱性燃料电池用离子交换膜.