基于超声波和云测试的油井液面测试系统研究

针对目前油井液面深度测试系统测量范围小、误差大、稳定性低的缺点,提出了基于声波法测动液面原理,利用时间序列分析技术、新息自适应卡尔曼滤波技术来实时检测回波信号,进而实现对油井液面深度的高精度测量和噪声处理;选用FPGA和云测试技术成功实现了油井液面深度测量系统的远程化和网络化。基于云测试的油井液面远程监测系统目前已在油田生产现场通过测试,测试结果表明,系统稳定,算法实时、高效,动液面深度测量误差小,测量精度高,能满足实际工程应用。     

一种新的珍珠层厚度测量方法

珍珠层厚度是是珍珠价值最主要的衡量指标之一,目前珍珠层厚度的无损测量方法主要采用光学相干层析成像技术和X射线技术。光学相干层析成像技术在实际测量时精度较低。在研究X射线测量原理的基础上,提出了一种新的珠层厚度测量方法。首先介绍了灰度图像的边缘识别算法和珍珠核、珍珠外圆度拟合算法,其次提出了一种引入对照机制的珍珠层测量算法,最后还对算法的误差进行了分析,算法的误差可以控制在0.02%以内。实际的测量也验证了本测量方法具有很高的精度。     

利用多项式拟合测量飞机油箱油量

飞机飞行中,测量剩余油量是关乎飞行安全的重要工作。以往采用的查表法存在存储数据量过大的问题,而插值法的计算又过于复杂,为此,提出了一种基于多项式数据拟合的油箱剩余油量测量方法,该方法通过存储多项式系数减少数据存储量,通过将多元插值计算改为多项式计算降低运算量。实验中,首先通过地面实验数据拟合获取多项式参数,再利用飞机飞行中获取的测量数据进行计算,所得结果与油箱内剩余油量的实际测量结果相比较,测量误差满足使用要求。通过理论和实验分析,在多项式拟合的阶数选择上明确了使用三阶多项式的合理性。该方法有较好的实用性,已在实践中应用。     

某机载瞄准系统精度评估测试方法

为了评估某型机载瞄准系统的精度,根据飞行试验参数测试需要,提出了通过图像测量与DGPS融合处理方法进行瞄准精度评估的试验方案。该方案利用飞行试验获取的图像数据与其他测量数据相结合,建立精度评估的方法,该评估方法在该机载武器瞄准系统精度评估得到应用,并且可在同类试验课题中推广应用。     

基于ARM的嵌入式超声传播时间测量装置

应用超声波检测技术进行检测时,通常需对超声波在介质中的传播时间进行精准的测量,为精准测量超声波的传播时间,设计了一套基于ARM的嵌入式超声传播时间测量装置。该装置电路运行稳定,成本低廉,采用多次测量结果取算数平均值的方法以减小随机干扰,采用参比方法放置接收探头以消减电路中电子器件的延时。通过对实验结果进行分析,得出该装置可精准测量超声波在实验试块中的传播时间且满足设计要求,分辨率可达一纳秒。     

Determination of mechanical properties by instrumented indentation

The paper reviews the current state of the depth-sensing indentation (sometimes called nanoindentation), where the information on material behaviour and properties is obtained from the indenter load and depth, measured continuously during loading and unloading. It is shown how the contact parameters and principal characteristics are determined using pointed or spherical indenters. Indentation tests can be used for the measurement of hardness and elastic modulus, and also of the yield stress and for the construction of stress–strain diagrams, for the determination of the work of indentation and its components. Most devices use monotonic loading and unloading, but some also enable measurement under a small harmonic signal added to the basic monotonously increasing load. This makes possible continuous measurement of contact stiffness and the study of dynamic properties and the determination of properties of coatings. One section is devoted to the measurement on viscoelastic-plastic materials, where the delayed deforming must be considered during the measurement as well as in data evaluation. Instrumented indentation can also be used for the study of creep under high temperatures. The paper also discusses the errors arising in depth-sensing measurements and informs briefly about some other possibilities of the method.     

Improved operator comfort and off-road capability through pendulum arm technology

The Nordic forest industry requires just-in-time wood deliveries. Operations must continue regardless of season, weather and terrain. Soil compaction and deep ruts must be avoided while providing high performance and a reasonable working environment for operators.The Xt28 pendulum arm forwarder is a full-size concept forwarder with six hydrostatic propelled wheels on pendulum arms built on a three-piece frame connected with two articulation joints. The Xt28 concept machine was tested according to Skogforsk standard machine tests. Rut depth test focused on soil interaction where rut depth was measured related to number of passes. Machine dynamics were measured using standardized test track with focus on operator comfort.The project proved the potential of pendulum arm technology in off-road transportation. Automatic pendulum arm levelling, equalized ground pressure between wheels and improved operator comfort through reducing adverse vibrations and roll angles, simultaneously reducing dynamic forces transferred to the forest floor. Pendulum arm technology improves travel speed in adverse terrain, providing unparalleled side slope capability and enhanced productivity.     

Implementation of a nonlinear filter for online nuclear counting

Nuclear counting is a challenging task for nuclear instrumentation because of the stochastic nature of radioactivity. Event counting has to be processed and filtered to determine a stable count rate value and perform variation monitoring of the measured event. An innovative approach for nuclear counting is presented in this study, improving response time and maintaining count rate stability. Some nonlinear filters providing a local maximum likelihood estimation of the signal have been recently developed, which have been tested and compared with conventional linear filters. A nonlinear filter thus developed shows significant performance in terms of response time and measurement precision. The filter also presents the specificity of easy embedment into digital signal processor (DSP) electronics based on field-programmable gate arrays (FPGA) or microcontrollers, compatible with real-time requirements. © 2001 Elsevier Science. All rights reserved.     

A comparison of measured room acoustics metrics using a spherical microphone array and conventional methods

The traditional microphone configuration used to measure room impulse responses (IRs) according to ISO 3382:2009 is an omnidirectional and figure-8 microphone pair. IRs measurements were taken in a 2500-seat auditorium to determine how the results from a spherical microphone array (an mh acoustics Eigenmike-em32) compare to those from the traditional microphone setup (a Brüel & Kjær Type-4192 omnidirectional microphone and a Sennheiser MKH30 figure-8 microphone). Measurements were obtained at six receiver locations, with three repetitions each in order to first evaluate repeatability. The metrics considered in this study were: reverberation time (T30), early decay time (EDT), clarity index (C80), strength (G), lateral energy fraction (J_LF) and late lateral energy level (L_J). Before calculating these quantities, the IRs were filtered to equalize the frequency response of the microphones and sound source. For the spherical array measurements, the omnidirectional (monopole) and figure-8 (dipole) patterns were extracted using beamforming. In terms of repeatability, the average standard deviation of the three measurements at each receiver location averaged across all metrics, receivers, and octave bands was found to be 0.01 just noticeable differences (JNDs). The analysis comparing the measurements from the two microphone configurations yielded differences which were less than 1 JND for the majority of metrics, with a few exceptions of EDT and C80 slightly above 1 JND. Based on this case study, these results indicate that spherical microphone arrays can be used to obtain valid room IR measurements, which will allow for the development of new metrics utilizing the higher spatial resolution made possible with spherical arrays.     

Color Measurement in Leaf Diagnosis

Abstract

The paper presents for the first time in literature the use of color measurement in leaf diagnosis. It uses the data obtained in certain well- established conditions, in CIE 1976 system for quantifying the color changes of leaves in different sufference (plant or leaf damage) symptoms.

The data are presented for sugar beet plants, but the application can be easily extended to any crop, arboretums, or ecological systems.

As a further extension of the study, it can be used in the telediagnosis of plants' sufferences by plane or even by satellite.