基于LabWindows/CVI的导弹舵机测控系统设计

舵机是导弹控制系统的重要执行机构,为实现对电动及气动多种型号导弹舵机性能的测试,设计开发了一种基于LabWindows/CVI虚拟仪器的测控系统。介绍了该测控系统硬件组成和软件结构流程,软件设计过程中充分利用多线程、数据库等技术,准确快速完成舵机自动化性能测试。应用结果表明:该舵机测控系统工作稳定,测试精度和自动化程度高,满足舵机试验测试精度和技术指标要求,为舵机的性能研究和维修维护提供了良好的测试环境。     

基于光谱发射率函数基形式不变的辐射测温技术

近年来,随着国防、工业、科技等领域飞速发展,无论是对于军用动力发射系统还是对于民用钢铁冶炼以及高科技新兴产业,辐射温度测量都具有重要意义。尤其在温度极高且伴随着瞬态测温(小于1 μs)需求的场合,多光谱辐射测温法被广泛运用。多光谱辐射测温法是通过选取被测目标多个特征波长,测量特征波长的辐射信息,再假设发射率与波长相关的数学模型,最终求解得到辐射温度。目前,利用该方法实际测温时,光谱发射率都采用固定的假设数学模型,而针对目标在不同温度状态下,该固定模型则无法进行自适应变化。同样,在不同温度下,如何解算最终的发射率和辐射温度也没有普适性的方法。基于普朗克黑体辐射定律,提出一种被测目标在不同温度下光谱发射率函数基形式不变的思想,简称发射率函数基形式不变法。通过该方法,发射率模型可以根据物体在不同温度状态下,函数系数动态改变来进行自适应变化。同时对于如何解算最终的发射率和辐射温度也相应提出了普适性的方法。通过大量仿真验证以及实际测量光谱辐射照度标准灯和溴钨灯温度实验,证明本文提出的方法比现有的光谱发射率处理方法更加简单实用并且能够有效地提高光谱发射率的计算精度,从而提高辐射温度测量精度。同时具有实用性好、应用广泛等特点。     

Advantages of Odd Random Phase Multisine Electrochemical Impedance Measurements

Electrochemical impedance spectroscopy (EIS) is a powerful technique to study electrochemical processes and to perform screening tasks. Recently an integrated measuring and modeling methodology for EIS based on a multisine excitation signal was developed. A key issue in this methodology is the data analysis, allowing us to rapidly quantify the reliability of the measured data. In this paper, a comparison is made between classical single‐sine and the proposed multisine measurements on the same system. The fitting of the impedance data obtained by single‐or multisine excitation and using different weighting factors is also discussed. In addition to the advantages reported in earlier work, it is concluded that, of all investigated frequencies, the odd random phase multisine excitation yields the highest quality data in the shortest measurement time.     

Measurement of indoor Rn using CR-39 under a thin film geometry

In this work an assembly for indoor ²²²Rn measurement is presented. This assembly is made up of two acrylic plates (14 cm×14 cm) separated by a distance of 4 mm. To prevent radon daughters from outside entering the assembly (and produce alpha particle tracks striking the CR-39 detector placed in the central region of one of these plates), the borders of these plates were progressively closed, leaving open only a rectangular aperture of 5 mm×4 mm. The size of this opening was determined experimentally, by exposing in two indoor environments assemblies with different apertures as follows: (i) all borders open; (ii) two borders closed; (iii) three borders closed; (iv) four borders closed but one containing a 6 cm×4 mm opening; (v) four borders closed but one containing a 2.5 cm×4 mm opening and (vi) four borders closed but one containing a 0.5 cm×4 mm opening. Track density shows a noticeable decrease between assembly (i) and assembly (iii), remaining constant for smaller openings. Only ²²²Rn, a noble gas, should enter the assembly independently of the opening size.     

辐射量热计在HT-6BTokamak上的测量

一、引言 在现行的托卡马克实验中,辐射损失和中性粒子损失是高温等离子体能量损失的主要通道之一。为了更好地了解托卡马克等离子体中能量平衡、辐射损失以及这些损失随等离子体参数的变化;了解等离子体中杂质含量和杂质输运以及等离子体与器壁的相互作用,辐射能量损失的时间特性、空间分布的测量显得很有必要。为     

带有测量误差的相关数据的CUSUM控制图

实际中测量误差不仅存在而且在某些情况下还影响质量控制的表现,本文将考虑带有测量误差的相关数据的监控问题. 为检测这类数据的飘移,我们给出了一个基于极大似然比检验的CUSUM控制图及其多种情况下的可控与失控的ARL.模拟结果显示, 当过程负相关时, 我们提出的CUSUM控制图具有良好的表现.     

Generalized partially linear mixed-effects models incorporating mismeasured covariates

In this article we consider a semiparametric generalized mixed-effects model, and propose combining local linear regression, and penalized quasilikelihood and local quasilikelihood techniques to estimate both population and individual parameters and nonparametric curves. The proposed estimators take into account the local correlation structure of the longitudinal data. We establish normality for the estimators of the parameter and asymptotic expansion for the estimators of the nonparametric part. For practical implementation, we propose an appropriate algorithm. We also consider the measurement error problem in covariates in our model, and suggest a strategy for adjusting the effects of measurement errors. We apply the proposed models and methods to study the relation between virologic and immunologic responses in AIDS clinical trials, in which virologic response is classified into binary variables. A dataset from an AIDS clinical study is analyzed.     

Direct determination of arsine in gases by inductively coupled plasma-dynamic reaction cell-mass spectrometry

Reliable determination of arsine (AsH₃) in gases is of great importance due to stringent regulations associated with health, safety and environmental issues. It is, however, challenging for an analyst to determine trace airborne arsine concentrations without specifically designed collection procedures using adsorption, desorption, dissolution or impinging techniques. To circumvent such technical barrier, we have newly developed a direct analytical method, characterized by introduction of an arsine gas sample into stable plasma stream, followed by gas-phase oxidation of arsine with molecular oxygen in a dynamic reaction cell (DRC) equipped within the inductively coupled plasma-mass spectrometry (ICP/MS) system, followed by subsequent detection of AsO⁺ ion. This preliminary work used trace arsine concentrations (161 μg m⁻³, 322 μg m⁻³, and 645 μg m⁻³) gravimetrically prepared in N₂ balance. The proposed method was optimized for the important experimental parameters such as the flow rates of the reaction gas, the arsine sample, and the carrier gas. This method was then validated by demonstrating good figure-of-merits including the low limit of detection (0.10 μg m⁻³), good linearity (r² > 0.9915), low measurement uncertainty (0.66%), and high speed of analysis (<6 min). The proposed method is expected to be potentially applicable to the determination of arsine in real workplace air after appropriate modifications are made.     

Measurement network for urban noise assessment: Comparison of mobile measurements and spatial interpolation approaches

This paper investigates the relevance of different interpolation techniques to improve the spatial resolution of urban noise maps, in complement to measurements achieved at fixed stations. Interpolation techniques based on mobile measurements are compared to usual spatial interpolations techniques, namely Inverse Distance Weighting and Kriging. The analyses rely on a measurement campaign, which consisted of nearly 8 h of geo-referenced mobile noise measurements performed at random moments of the day, conducted simultaneously with continuous measurements collected at five fixed stations located on the inner city of Gent, Belgium.Firstly, a procedure is proposed to build a noise map with a high spatial resolution (one point every 5 m). The procedure relies on both mobile and fixed measurements: the mobile measurements are used to capture spatial variations on the network, and the measurements at fixed stations are used to capture the temporal variations. The map produced is then used as reference to compare the interpolation techniques based on a significantly more sparse measurement set.The spatial interpolation techniques tested fail in predicting accurately the noise level variations within streets. The explanation given is that they do not offer a sufficient covering of the network, and assume spatial variations which are not coherent with traffic dynamics or street configurations. Inversely, mobile measurements cover the entire network. As a result, they allow a more accurate prediction of noise levels even if very short samples are used, provided that the procedure used to estimate noise levels includes a spatial aggregation, which aims at smoothing the high spatial variations inevitable with short samples. Moreover, mobile measurements can advantageously be used to optimize, through a Genetic Algorithm, the locations where to install fixed stations, promising an efficient noise monitoring at reduced operational costs.