介质折射率对一维三元光子晶体带隙的影响

利用光学传输矩阵法,数值模拟了一维二元、三元光子晶体的带隙结构,得出:三元光子晶体的主带隙略宽于二元光子晶体的主带隙;三元光子晶体的主带隙主要取决于最高折射率的介质和最低折射率的介质,而与居于两者之间的介质关系不大,并作出了相应的关系曲线。最后推导了三元光子晶体的色散关系。     

不可逆热电制冷循环的性能优化准则

考虑了热电制冷循环中热阻、热漏和焦耳热等主要不可逆性，引入了特征参量功率消耗比r，借助装置设计参量X表征了内、外不可逆性，利用有限时间热力学建立了制冷功率、制冷系数与特征参量之间的基本优化关系，导出了协调制冷功率与制冷系数的参量r、X以及电流I的优化准则。     

特征与可解性

本文研究了具有不可约特征x使得x(1)²=|G:Z(G)|成立的群G的可解性,并证明了:对于这样的群G,当|Irr(G)|≤4时,G是可解群;当4<|Irr(G)|≤6时,在某些条件下,G是有解群.     

时变线性系统特征根判稳的推广

本文研究了二维时变线性系统零解的稳定性，给出了一些允许系数矩阵主对角元变号，系数矩阵特征根变号的判定稳定性的充分条件。     

《毛细管电色谱理论基础》

毛细管电色谱作为一种新型微分离分析技术,其分离过程具有多种机理协同作用的特征。对于毛细管电色谱的理论研究不仅要考虑系统的电属性,还要兼顾溶质的两相分配特征。该书系统地阐述了毛细管电色谱的基本理论,讨论了分离过程中影响峰展宽的因素及其规律。基于作者发展的弛豫理     

Structural and Electrical Characteristics of Pb（Zr0.53,Ti0.47）O3 Thin Films Deposited on Si （100） Substrates

Pb(Zr0.53, Ti0.47)O3 (PZT) films were directly deposited on Si substrates without a buffer layer by pulsed laser deposition. Only(110)-oriented PZT peaks (other than Si substrate peaks) were observed from the XRD data. The electrical properties of the PZT/Si capacitor were characterized in terms of both the capacitance versus voltage (C-V) and current versus voltage (I-V) measurements. The clockwise trace of the C-V curve shows ferroelectric polarization switching, as is expected. From the I-V curves, the Schottky emission and spacecharge-limited-current behaviour are found to be the mainly leakage current mechanism in a certain electric field range in the negative and positive bias, respectively.     

一类图的特征多项式与匹配多项式

本文对一类具有对称轴的图A_n(n≥0),得到了它的特征多项式及匹配多项式的精确表达式;同时还得到A_(?)的完美匹配数。     

Structural Characteristics of Liquid Sn

We investigate the structural properties of liquid Sn. With the help of the internal friction (tanФ) method, it is found that a peak appears in the tan Ф - T curve, suggesting that an anomalous discontinuous temperatureinduced structure change may take place in liquid Sn. From the experimental data of pair distribution functions, we calculate the viscosity η and the excess entropy S and it is found that there are a peak of viscosity in the η-T curve and a bend of excess entropy in the S - T curve, which give a positive support to the appearance of the internal-friction peak in the tan Ф- T curve.     

CL-18的合成

CL-18是根据TATB和BTF两种化合物的分子结构特征所设计并已合成的，其分子兼具TATB和BTF的分子特征，一方面，氨基的推电子效应使C-NO2键能增强，又由于氨基与硝基的氧原子间形成强的分子内和分子间氢键，更增强了分子的稳定性，因而具有优良的热稳定性和较低的感度。另一方面，分子中引入氧化呋咱基团，可明显提高化合物的密度和爆轰性能。在钝感冲击片雷管和钝感传爆药中具有潜在的应用前景。