以磷化铁为添加剂沿(111)面生长磷掺杂金刚石大单晶

掺杂是调控金刚石性能的一种重要手段。本文采用温度梯度法,在5.6 GPa、1 312 ℃的条件下,选用Fe₃P作为磷源进行磷掺杂金刚石大单晶的合成。金刚石样品的显微光学照片表明,随着Fe₃P添加比例的增加,金刚石晶体的颜色逐渐变深,包裹体数量逐渐增加,晶形由板状转变为塔状直至骸晶。金刚石晶形的变化表明Fe₃P的添加使生长金刚石的V形区向右偏移,这是Fe₃P改变触媒特性的缘故。红外光谱分析表明,Fe₃P的添加使金刚石晶体中氮含量上升,这说明磷的进入诱使氮原子更容易进入金刚石晶格中。激光拉曼光谱测试表明,随着Fe₃P添加比例的增加,所合成的掺磷金刚石的拉曼峰位变化不大,其半峰全宽(FWHM)值变大,这说明磷的进入使得金刚石晶格畸变增加。XPS测试结果显示,随着Fe₃P添加比例的增加,金刚石晶体中磷相对碳的原子百分含量也会增加,这意味着添加Fe₃P所合成的金刚石晶体中有磷存在。     

Opposed type double stage cell for Mbar pressure experiment with large sample volume

ABSTRACT

A new opposed type double-stage large volume cell has been developed to compress large volume samples to more than 100?GPa (Mbar) pressure. A pair of second-stage diamond anvils is introduced into the first-stage Paris–Edinburgh press. The double-stage large volume cell allows the generation of ultrahigh pressures using a large culet diameter of the second-stage diamond anvils (diameters of 0.5–1.2?mm). Pressure generation up to 131?GPa has been achieved by using the culet diameter of 0.5?mm. Sample volume of the double-stage large volume cell can be more than ～100 times larger than that of conventional Mbar experiment using a diamond anvil cell. The double-stage large volume cell has a large opening in the horizontal plane for X-ray measurements, which is particularly suited for the multi-angle energy dispersive X-ray diffraction measurement, thus opening a new way of in situ structural determinations of amorphous materials at Mbar pressures.     

POD enriched boundary models and their optimal stabilisation

Modes obtained using the Proper Orthogonal Decomposition are used as boundary enrichment functions within a variational multiscale method for the stochastically forced Burgers equation. Initially, large increases in accuracy are obtained using the enrichment functions without stabilisation terms. Then, optimal coefficients for the stabilisation parameter τ of the unresolved scale model are calibrated using a goal‐oriented model‐constrained optimisation technique, resulting in further improvements. As both the determination of the enrichment functions and the optimisation of the coefficients requires high‐accuracy reference data, a scaling procedure is introduced to allow their use over range of conditions. Numerical experiments confirm that the scaling procedure is effective. Copyright © 2014 John Wiley & Sons, Ltd.     

Morris-Lecar系统中通道噪声诱导的自发性动作电位研究

在生物物理学中, 越来越多的现象是由于分段确定性的动力系统与连续时间马氏过程之间的耦合作用而产生的. 因为这种耦合性, 相关的数学模型更适合取为随机混合系统而不是扩散过程(基于It?随机微分方程). 本文从理论上和数值上研究了在弱噪声条件下无鞍点状态的随机混合Morris-Lecar系统中, 由通道噪声诱导的自发性放电现象. 一个动作电位的初始阶段可视为噪声诱导的逃逸事件, 其最优路径和拟势可由辅助Hamilton系统给出. 由于系统不存在鞍点, 因此可选择虚拟分界线(ghost separatrix)为阈值, 研究噪声诱导的自静息态的逃逸事件. 通过计算在阈值处的拟势, 便可发现其值有一个明显的最小值, 其作用类似于鞍点. 通过改进的Monte Carlo模拟方法, 计算了历程概率分布, 其结果对初始阶段和兴奋阶段的理论解均给出了验证. 此外, 基于前人将拟势等高线作为阈值的另一种选择, 我们对两种阈值取法的优劣性进行了比较. 最后, 本文研究了钠离子和钾离子通道噪声的不同组合对最优路径和拟势的影响. 结果表明: 钾离子通道噪声在自发性放电过程中起主导作用, 且两种噪声强度存在一个最优比例能使总的噪声强度达到最小.      

基于LBM方法的风力发电机尾流结构仿真

针对传统CFD数值计算方法难以实现风力机动态旋转及其旋转状态下的流固耦合计算,本文结合格子玻尔兹曼(LBM)方法易于处理动态复杂边界的特点及大涡模拟(LES)方法在非稳态涡流结构捕捉上的优势,采用LBM-LES联合方法进行三维风力发电机整机气动性能及尾流结构仿真研究,同时采用尺度自适应方法对尾涡结构进行跟踪和精细化计算。针对NREL PhaseⅥ型试验机进行模拟,得到了与实验结果吻合的流动形态及尾流结构演变规律,分析了尾流区速度演变规律并对比了不同亚格子湍流模型对计算结果的影响.     

大视场反射式施密特光学系统设计与检测

大视场、低成本、高性能天文望远镜是当前研究和开发的热点。基于像差平衡原理，在正入射施密特矫正板基础上推导出斜入射反射式施密特矫正板方程，针对焦距1 700 mm，成像视场角4°，波段为0.4 μm～0.9 μm，F数为4.25的光学系统，求解出施密特矫正板方程，并作为初始结构参数代入Zemax软件进一步优化。设计结果表明，在全视场范围内，该系统在奈奎斯特频率100 lp/mm处的调制传递函数MTF大于0.35，畸变小于2.5%，成像质量达到了衍射极限。优化设计后施密特矫正板与最近球面最大偏差为0.005 mm，采用特制的补偿器结合干涉仪可完成面形高精度检测。该施密特系统的设计为大视场、宽波段天文望远镜的开发提供了参考。     

Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.     

稳定分层湍流中逆梯度输运的关联分析研究

本文采用关联分析方法研究了稳定温度分层湍流中的结构特性、输运特性，以及热量、动量逆梯度输运现象的尺度效应及其参数演化．首先采用大涡模拟方法对稳定分层湍流中的结构特性和输运特性进行了分析，将逆梯度输运发生的时间尺度作为已知条件，结合关联量分析方法在波数空间中的解析解，对逆梯度输运现象的尺度效应进行了分析研究．结果发现，稳定分层强度较大的流动中发生垂向热量及动量逆梯度输运现象，发生的结构尺度与关联分析所发现垂向热量、动量逆梯度输运的波数形成了呼应．随着分层强度增加，热量、动量的输运强度均受抑制，与逆梯度输运关联的流场结构尺度减小，同样的效应也发生在流场结构向下游演化的过程中．     

How deeply are core electrons perturbed when valence electrons are spin polarized? The case study of transition metal compounds

The ferromagnetic and antiferromagnetic wave functions of the KMnF₃ perovskite have been evaluated quantum-mechanically by using an all electron approach and, for comparison, pseudopotentials on the transition metal and the fluorine ions. It is shown that the different number of α and β electrons in the d shell of Mn perturbs the inner shells, with shifts between the α and β eigenvalues that can be as large as 6 eV for the 3s level, and is far from negligible also for the 2s and 2p states. The valence electrons of F are polarized by the majority spin electrons of Mn, and in turn, spin polarize their 1s electrons. When a pseudopotential is used, such a spin polarization of the core functions of Mn and F can obviously not take place. The importance of such a spin polarization can be appreciated by comparing (i) the spin density at the Mn and F nuclear position, and then the Fermi contact constant, a crucial quantity for the hyperfine coupling, and (ii) the ferromagnetic–antiferromagnetic energy difference, when obtained with an all electron or a pseudopotential scheme, and exploring how the latter varies with pressure. This difference is as large as 50% of the all electron datum, and is mainly due to the rigid treatment of the F ion core. The effect of five different functionals on the core spin polarization is documented.