CL-20/TNT共晶炸药的分子动力学研究

运用分子动力学(MD)方法,选择凝聚态分子势能优化力场(COMPASS),对六硝基六氮杂异伍兹烷(ε-CL-20)、2,4,6-三硝基甲苯(TNT)晶体及其等摩尔比的CL-20/TNT混合炸药和共晶炸药进行不同温度下恒定粒子数等压等温(NPT)系综模拟研究.结果表明,CL-20/TNT共晶的内聚能密度(CED)和结合能随温度的升高逐渐减小;共晶的CED比混合炸药的大,结合能是混合炸药的2倍多,预示其稳定性明显增强.对相关函数和局部放大结构显示共晶中组分分子间作用主要来自TNT中H和CL-20中O以及CL-20中H和TNT中O之间形成的氢键.通过波动法求得的弹性力学性能结果表明,CL-20/TNT共晶的拉伸模量(E)、体积模量(K)和剪切模量(G)介于ε-CL-20和TNT晶体之间,且随温度的升高而下降,符合一般预期;但共晶炸药的柯西压(C12-C44,Cij弹性系数)、K/G和泊松比(ν)均比其组分炸药ε-CL-20和TNT高得多,预示该共晶具有异常高的延展性和弹性伸长,主要是二组分呈层状交替排列且之间存在较强相互作用所致.     

ZnO纳米棒阵列基-芴类共轭聚合物膜的制备及对TNT的检测评价

将共轭芴类荧光聚合物涂覆在纳米Zn O棒阵列上,制成荧光传感膜检测痕量TNT。通过水热法生长的Zn O纳米棒阵列具有较好的取向性,作为衬底可有效增大荧光膜荧光强度,同时,Zn O纳米棒阵列的高比表面积可提高膜对TNT气体的响应效率,使20s内的荧光猝灭率可达72%。     

Strong explosion near a parallelepipedic structure

The purpose of this paper is to report the blast loading characteristics resulting from the detonation of a stoichiometric propane–oxygen mixture, and to validate the approach which relies on simulating TNT explosions at large scale by small-scale experiments of gaseous explosions. Several dimensionless correlations are obtained from experimental data. These relationships allow determination of the parameters of a blast wave interacting with a structure as a function of the positions of the explosive charge and the structure. Simulations carried out with the Autodyn code show good correlation with experimental results. The Hopkinson law is suggested to predict the blast wave’s parameters at large scale on the basis of small-scale experiments and simulations. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31–August 5, 2005.     

Electrochemical Detection of TNT at Cobalt Phthalocyanine Mediated Screen‐Printed Electrodes and Application to Detection of Airborne Vapours

We describe the use of cobalt phthalocyanine as a mediator to improve the sensitivity for the electrochemical detection of TNT. Commercial screen‐printed electrodes containing cobalt phthalocyanine were employed for determination of TNT. Improved sensitivities compared to screen‐printed carbon electrodes without phthalocyanine were observed, current response for cyclic voltammetric measurements at modified electrodes being at least double that of unmodified electrodes. A synergistic effect between oxygen and TNT reduction was also observed. Correlation between TNT concentrations and sensor output was observed between 0–200 µM TNT. Initial proof‐of‐concept experiments combining electrochemical determinations, with the use of an air‐sampling cyclone, are also reported.     

A DFT Study on Estrone – TNT Interaction

Trinitrotoluene, known as TNT, is a widely used powerful explosive. It is a poisonous material, which injures almost all cells, especially those of liver, bone marrow, and kidney. Estrone is a sex hormone having an electron rich aromatic (phenolic) ring that is capable of forming a π complex with molecules containing an electron deficient π system. This study has focused on investigating the tendency of the complex formation of TNT with estrone. It has been thought that the formation of estrone‐TNT π complex might take place in a human body exposed to acute or prolong period of this hazardous chemical and consequently estrone activities might be impaired. The complex formation reaction was investigated mainly using DFT method with B3LYP/6‐31G(d, p) basis set in gas phase. The existence of π interaction between estrone and TNT was demonstrated by computational spectroscopic analyses (UV/Vis, IR, and ¹H NMR techniques). The frontier molecular orbital (HOMO and LUMO) analyses have shown that the considered π complex is very resistant to oxidation with respect to its components, estrone and TNT.     

爆炸条件下溶菌酶反应产物的基质辅助激光解吸-飞行时间质谱分析

以爆炸条件下溶菌酶的反应产物为研究对象,运用基质辅助激光解吸-飞行时间质谱的方法研究其反应产物与不同炸药的反应特征性.结果显示,雷管的使用不会对溶菌酶有影响,而在有爆炸物爆炸的条件下,除了正常溶菌酶酶解多肽信号外,一些[MH+17]+,[MH+18]+,[MH+28]+,[MH+32]+和[MH+44]+的加合峰信号也能被检测到.这可能是在炸药爆炸过程中产生的一些活性小分子(如NH3,H2O,CO/N2,O2,CO2)与溶菌酶发生反应得到的反应产物.不同炸药生成的活性小分子能够分别与溶菌酶的某些反应位点反应生成特征性的反应产物,有利于这些炸药的分析与检测.     

TNT高温热解及含碳团簇形成的反应分子动力学模拟

ReaxFF-MD模拟三硝基甲苯(TNT)高温热解显示增加了伦敦耗散力项(E_lg)的ReaxFF/lg 势函数在含能材料平衡密度计算方面具有优越性. 产物识别分析得出TNT热解的主要产物为NO₂、NO、H₂O、N₂、CO₂、CO、OH以及HONO,且最终产物为H₂O、N₂和CO₂. 使用ReaxFF势函数模拟同样过程进行比较性分析显示,在主要产物和最终产物方面与ReaxFF/lg 作用结果具有一致性,但在化学反应动力学方面表现出一些差异. ortho-NO₂键断裂和C―NO₂→C―ONO重排布-断裂形成NO₂和NO是TNT热解的主要初级反应,且前者产生速率大于后者,NO₂和NO形成后很快参与次级反应并最终形成N₂. 高温热解中形成OH等小分子会促进H₂O的形成. 环上基团相互反应或直接脱落后,主环间C―C键才发生断裂,但温度升高会加快主环断裂,并进一步分解形成CO₂,这也是高温条件下CO₂分布产生波动的一个重要原因. 并且当晶胞中的TNT分子几乎完全分解时,系统的势能开始明显衰减. 与温度相比,密度对热解中最大含碳团簇形成的影响更明显. 并且,模拟结果显示,在TNT完全分解前已经出现含碳中间体的聚合现象. 此项工作表明使用ReaxFF/lg 反应力场研究TNT高温热解可以提供具体的动力学和化学方面的信息,并有助于理解含能材料的爆轰问题并可进行安全评估.     

气相色谱法测定DNT废酸、废水中的甲苯及硝基甲苯等含量

研究气相色谱在测定废水、废酸中甲苯、硝基甲苯含量方面的应用.根据相关标准及废酸、废水处理的实际情况确定最佳的实验条件,废水样12次测定结果的相对标准偏差小于0.5％,加标回收率为98.31％.该法测定结果精确度高,适合DNT废酸、废水处理的分析监控.     

测量爆炸火焰真温的多光谱温度计的研制——现场实验与测量精度分析

研制了可用于大型爆炸现场的、 测量爆炸火焰真温的多光谱温度计(量程为800~3 500 ℃,波长范围为0.6~1.1 μm)。测量原理进一步改进,加入亮温逼近法解决了二次测量法初值选取困难的问题,并应用此高温计在空旷场地对3 kg TNT炸药爆炸的全过程进行测量。通过实验结果的分析可知,此高温计可以测量爆炸火焰真温变化全过程,对波阵面瞬时温度与燃烧火球温度的测量均具有很好的效果。同时,分析了影响此高温计测量精度的各个因素,得出目前制约多光谱高温计测量精度提高的主要因素仍然为真温算法及标定方法的误差,这为今后研制高精度高温计明确了方向。     

Detection of Explosives Using Field‐Effect Transistors

The gate surfaces of ion‐sensitive field‐effect transistor (ISFET) devices were functionalized with the π‐donor units, 6‐hydroxydopamine ( 1 ) or 4‐aminothiophenol ( 2 ). Concentration of trinitrotoluene, TNT, on the gate via π‐donor‐acceptor interactions yields charge‐transfer complexes that alter the gate potential. This enables the label‐free analysis of TNT with a detection limit corresponding to 1×10^?7 M.