基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

Ostrowski-Taussky不等式的推广

行列式的概念是矩阵分析中的一个很基本的概念,其中一个非常重要的应用就是解线性方程组.由于行列式的概念是和矩阵特征值紧密相关的,研究行列式的一些性质可以从侧面反映出该矩阵特征值的一些性质.Ostrowski-Taussky不等式是一个关于行列式的不等式,利用矩阵极分解的概念,给出了不等式的一个新的证明,并且推广了不等式.     

直下式LED黄疸灯的设计与制作

研制了一款可在接收面上实现平面光谱分布均匀的直下式LED黄疸灯。首先,按照LED数量从少到多的顺序,在同一基板上依次对4种单色LED进行排布,使其分别在同一出光面上形成大小相近且照度均匀的光斑,进而使出光面乃至接收面上实现平面光谱分布均匀。其次,对直下式LED黄疸灯仿真验证,结果表明其确实可在接收面上实现平面光谱分布均匀。最后,在出光面上分别放置扩散板和棱镜膜,对两款直下式LED黄疸灯样品进行实验测试。测试结果表明:相较而言,在出光面上放置增光膜的直下式LED黄疸灯样品可以使接收面具有较多的光能量。但无论出光面上放置的是棱镜膜还是扩散板,在600 mm×300 mm的接收面上,直下式LED黄疸灯都能实现99. 9%以上的平面光谱分布均匀度值以及74%以上的照度均匀度值,符合国家婴幼儿光疗设备安全标准。     

一种环形屏积分球光源的辐照均匀度研究

均匀光源被广泛应用于光学成像、遥感仪器的研制与标定等领域。提出了一种具有环形遮挡屏的积分球光源结构，以辐照均匀度分布特性为目标，利用蒙特卡洛(MCM)分析通过改变光源类型、挡板位置、开口大小、光源数量等参数对光源结构进行分析与优化。结果显示，朗伯特光源较之准直型光源辐照均匀度平均提高2.32%；挡板位置靠近积分球边缘时，辐照均匀度略低于其他位置；综合考虑辐射能量与照度均匀度，积分球开口比定在30%~35%区间内更为合适；辐射能量与光源数量呈线性关系，且不均匀度随光源数量在2.46%~3.38%波动。优化后的环形遮挡屏结构，可作为辐照均匀的光源应用于实际场景。     

冷冻法硝酸磷肥工艺中酸不溶物提纯研究

采用酸浸、磁选酸浸、水淬/研磨酸浸等不同工艺对冷冻法硝酸磷肥生产工艺中的废渣-酸不溶物进行了提纯处理,利用X射线荧光光谱仪(XRF测试)对酸不溶物提纯前后各成分含量的变化进行了分析,从中得出了不同工艺流程对酸不溶物纯度的影响,最终确定了最佳的酸不溶物处理工艺.结果表明:在酸浸实验中,盐酸酸浸效果最佳,可将酸不溶物中SiO2纯度达到82.43;;在酸浸工艺前加入磁选、水淬、研磨的工序均可有效提升酸不溶物的提纯效果;冷冻法硝酸磷肥工艺中酸不溶物最佳的提纯工艺路线为:干燥、筛分、水洗、磁选、研磨、盐酸酸浸,处理后酸不溶物中SiO2纯度达到88.92;,符合微硅粉的生产要求.     

旋涂法制备掺杂BiOX薄膜及光催化性能研究

采用旋涂的方法在基底材料表面原位生长BiOX(X=C1、Br、I)薄膜材料.样品的晶体结构和光学性质等通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)、紫外可见漫反射光谱(UV-Vis)进行了表征.结果表明旋涂法制备的BiOX薄膜是纯净的,无其他杂质,均匀性好.通过对BiOX薄膜材料的光催化性能和瞬态表面光电压技术(TPV)进行了研究,发现卤素掺杂的BiOBr0.48I052具有较好的光催化性能.其结果表明催化性能提高的原因可能是BiOBr0.48I0.52薄膜在光照下可以产生更强的光生载流子并具有更长的光生载流子寿命.     

依从者平均因果效应的统计推断

本文主要研究临床试验中出现不依从现象时依从子总体的平均因果效应的统计推断。考虑在实际服药状态是二值变量且有相关性,治疗响应变量连续取值的情形,同时考虑协变量对治疗效果有影响的情况下,给出了治疗效果参数的可识别性及近似条件极大似然估计,且构造了记分检验统计量。对特殊模型进行了模拟,结果表明与理论预期一致。