Measuring calcium uptake and inositol 1,4,5-trisphosphate-induced calcium release in cerebellum microsomes using Fluo-3

A simple fluorimetric method is presented for measuring calcium uptake and inositol 1,4,5-trisphosphate (InsP₃)-induced calcium release in microsomes using Fluo-3. This method is used to investigate the amplitude of calcium release (quantal release) induced by InsP₃ from rat cerebellum microsomes.     

Enthalpies of dilution of aqueous solutions of amides and alcohols

Enthalpies of dilution of aqueous systems containing formamide, dimethyl-formamide, the mixture of these amides, and each amide separately with mannitol, inositol, and cyclohexanol have been determined at 25°C. The data have been treated in terms of the Savage-Wood additivity principle and in combination with literature data. New values for the methylene-amide, carbinol-amide, and amide-amide group interaction enthalpies are presented. These may be used with data on a wider variety of solute systems to obtain interaction enthalpies for new groups.     

A highly rigid diamine monomer derived from naturally occurring myo‐inositol and its use for polyamide synthesis

A rigid diamine was synthesized from myo‐inositol, a naturally occurring cyclic hexaol, and used as a monomer to synthesize polyamides. myo‐Inositol was treated with 1,1‐dimethoxycyclohexane to yield a bisketal bearing two hydroxyl groups, and from this bisketal, the target diamine was synthesized in three steps: (1) derivation of the diol into the corresponding bistriflate, (2) nucleophilic substitution of the bistriflate with sodium azide yielding a diazide, and (3) reduction of the diazide to the target diamine. The target diamine readily underwent polycondensation with dicarboxylic acid chloride in solution. The resulting polyamides, whose main chain inherited the rigid 5‐6‐5 system from the diamine monomers, have high glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3436–3443     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Partially bio‐based tri‐ and hexaallyl monomers: Synthesis from naturally occurring myo‐inositol and polyaddition with dithiols

myo‐Inositol, a naturally occurring cyclic hexaol, was converted to 2,4,6‐tri‐O‐allyl‐myo‐inositol and 1,2,3,4,5,6‐hexa‐O‐allyl‐myo‐inositol. Polyaddition of the former product, a tri(allyl ether) bearing three hydroxyl groups, with dithiols yielded the corresponding networked polymers. Their glass transition temperatures (T_gs) were higher than those of networked polymers formed by the polyaddition of 1,3,5‐tri‐O‐methyl‐2,4,6‐tri‐O‐allyl‐myo‐inositol. This implied the reinforcement of the networks by hydrogen bonding between the hydroxyl groups. Polyaddition of the latter product, a hexa(allyl ether), with dithiols yielded the corresponding networked polymers with much higher T_gs than those of all of the aforementioned networked polymers. This implied that efficient use of the hexafunctional monomer leads to the formation of more densely crosslinked polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1524–1529     

Divergent Synthesis of All Possible Optically Active Regioisomers of Myo‐Inositol Mono‐ and Bisphosphates

All possible optically active regioisomers of myo‐inositol mono‐ and bisphosphates were synthesized using inositol derivatives suitably protected with various protecting groups (IR_ns) as key intermediates. A series of procedures including Novozym 435 catalyzed enzymatic resolution of (3aR,4S,7S,7aR)‐rel‐3a,4,7,7a‐tetrahydro‐2,2‐dimethyl‐1,3‐benzodioxole‐4,7‐diol diacetate, several protection and deprotection reactions, and acyl migration afforded two enantiomeric pairs of IR₅ and six enantiomeric pairs of IR₄. Phosphorylation of these key intermediates by the phosphitylation and oxidation procedure gave the target products after removal of the protecting groups.      

Formation of lithium,sodium and potassium complexes with 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol (taci)

Single crystals of (1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)lithium(I) diiodide dihydrate, [Li(C₆H₁₆N₃O₃)(C₆H₁₅N₃O₃)]I₂·2H₂O or [Li(Htaci)(taci)]I₂·2H₂O (taci is 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol), (I), bis(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)sodium(I) iodide, [Na(C₆H₁₅N₃O₃)₂]I or [Na(taci)₂]I, (II), and bis(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)potassium(I) iodide, [K(C₆H₁₅N₃O₃)₂]I or [K(taci)₂]I, (III), were grown by diffusion of MeOH into aqueous solutions of the complexes. The structures of the Na and K complexes are isotypic. In all three complexes, the taci ligands adopt a chair conformation with axial hydroxy groups, and the metal cations exhibit exclusive O‐atom coordination. The six O atoms of the resulting MO₆ unit define a centrosymmetric trigonal antiprism with approximate D_3d symmetry. The interligand O...O distances increase significantly in the order Li < Na < K. The structure of (I) exhibits a complex three‐dimensional network of R—NH₂—H...NH₂—R, R—O—H...NH₂—R and R—O—H...O(H)—H...NH₂—R hydrogen bonds. The structures of the Na and K complexes consist of a stack of layers, in which each taci ligand is bonded to three neighbours via pairwise O—H...NH₂ interactions between vicinal HO—CH—CH—NH₂ groups.     

Analytical Methods for Determination of Phytic Acid and Other Inositol Phosphates: A Review

From the early precipitation-based techniques, introduced more than a century ago, to the latest development of enzymatic bio- and nano-sensor applications, the analysis of phytic acid and/or other inositol phosphates has never been a straightforward analytical task. Due to the biomedical importance, such as antinutritional, antioxidant and anticancer effects, several types of methodologies were investigated over the years to develop a reliable determination of these intriguing analytes in many types of biological samples; from various foodstuffs to living cell organisms. The main aim of the present work was to critically overview the development of the most relevant analytical principles, separation and detection methods that have been applied in order to overcome the difficulties with specific chemical properties of inositol phosphates, their interferences, absence of characteristic signal (e.g., absorbance), and strong binding interactions with (multivalent) metals and other biological molecules present in the sample matrix. A systematical and chronological review of the applied methodology and the detection system is given, ranging from the very beginnings of the classical gravimetric and titrimetric analysis, through the potentiometric titrations, chromatographic and electrophoretic separation techniques, to the use of spectroscopic methods and of the recently reported fluorescence and voltammetric bio- and nano-sensors.     

高碘酸钠氧化法测定肌醇含量

高碘酸钠氧化法测定肌醇含量张楚富，林清华，梁会（武汉大学生命科学学院武汉４３００７２）王泽胜（湖南兰龙科技实业公司长沙４１０００６）关键词植酸钙，肌醇，高碘酸钠氧化法分类号Ｑ５０８肌醇是一种环己六醇，它以植酸盐的形式主要存在于米糠和其他油料作物种子中...     

A definitive synthesis of D-myo-inositol 1,4,5,6-tetrakisphosphate and its enantiomer D-myo-inositol 3,4,5,6-tetrakisphosphate from a novel butane-2,3-diacetal-protected inositol

New and rapid syntheses of the enantiomeric intracellular signalling molecules d-myo-inositol 1,4,5,6-tetrakisphosphate (1 a) and D-myo-inositol 3,4,5,6-tetrakisphosphate (1 b) are described. The synthetic strategy employs the novel butane-2,3-diacetal-protected (BDA-protected) myo-inositol (+/-)-3 ab, directly accessible from myo-inositol on a large scale, and an optical resolution with diastereoisomeric (R)-(-)-acetylmandelate esters. The X-ray crystal structure of (+/-)-4, an unusual side product of acid-catalysed reaction of myo-inositol with butanedione is also presented, and the absolute configurations of 1 a and 1 b are definitively assigned by conversion of key precursors into (+)-bornesitol and L-iditol hexaacetate, respectively. Biological activity of synthetic 1 b was confirmed in comparison with the natural polyphosphate.