A highly rigid diamine monomer derived from naturally occurring myo‐inositol and its use for polyamide synthesis

A rigid diamine was synthesized from myo‐inositol, a naturally occurring cyclic hexaol, and used as a monomer to synthesize polyamides. myo‐Inositol was treated with 1,1‐dimethoxycyclohexane to yield a bisketal bearing two hydroxyl groups, and from this bisketal, the target diamine was synthesized in three steps: (1) derivation of the diol into the corresponding bistriflate, (2) nucleophilic substitution of the bistriflate with sodium azide yielding a diazide, and (3) reduction of the diazide to the target diamine. The target diamine readily underwent polycondensation with dicarboxylic acid chloride in solution. The resulting polyamides, whose main chain inherited the rigid 5‐6‐5 system from the diamine monomers, have high glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3436–3443     

Rigid diol bearing 6‐6‐6 fused ring system derived from naturally occurring myo‐inositol and its polyaddition with diisocyanates

Naturally occurring myo‐inositol was developed into a highly rigid diol by converting its 3,4‐ and 1,6‐vicinal diols in trans configuration into the corresponding butane‐2,3‐diacetals. The resulting diol bearing 6‐6‐6 fused ring system, in which conformational change is strictly suppressed, was combined with diisocyanates to perform polyadditions. The resulting polyurethanes were analyzed by differential scanning calorimetry, and it was found that their glass transition temperatures were much higher than those of the previously reported myo‐inositol‐derived polyurethanes, which were synthesized from a myo‐inositol‐derived diol bearing 5‐6‐5 fused ring system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3798–3803     

Partially bio‐based tri‐ and hexaallyl monomers: Synthesis from naturally occurring myo‐inositol and polyaddition with dithiols

myo‐Inositol, a naturally occurring cyclic hexaol, was converted to 2,4,6‐tri‐O‐allyl‐myo‐inositol and 1,2,3,4,5,6‐hexa‐O‐allyl‐myo‐inositol. Polyaddition of the former product, a tri(allyl ether) bearing three hydroxyl groups, with dithiols yielded the corresponding networked polymers. Their glass transition temperatures (T_gs) were higher than those of networked polymers formed by the polyaddition of 1,3,5‐tri‐O‐methyl‐2,4,6‐tri‐O‐allyl‐myo‐inositol. This implied the reinforcement of the networks by hydrogen bonding between the hydroxyl groups. Polyaddition of the latter product, a hexa(allyl ether), with dithiols yielded the corresponding networked polymers with much higher T_gs than those of all of the aforementioned networked polymers. This implied that efficient use of the hexafunctional monomer leads to the formation of more densely crosslinked polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1524–1529     

Synthesis of hydroxyl‐bearing polyurethanes from naturally occurring myo‐inositol

A route from naturally occurring myo‐inositol to hydroxyl‐bearing polyurethanes has been developed. The diol prepared from the bis‐acetalization of myo‐inositol with 1,1‐dimethoxycyclohexane was reacted with a rigid diisocyanate, 1,3‐bis(isocyanatomethyl)cyclohexane to afford the corresponding polyurethane, of which glass transition temperature (T_g) was quite high as 192 °C. The polyurethane contains side chains inherited from the acetal moieties of the diol monomer and was treated with trifluoroacetic acid to hydrolyze the acetal moieties and afford the target polyurethane functionalized with hydroxyl groups. The presence of many hydroxyl groups in the side chains, which can form hydrogen bonds with each other, resulted in a high T_g, 186 °C. In addition, the hydroxyl groups were reacted with isocyanates to achieve further side‐chain modifications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1358–1364     

Enhancing Intermolecular Benzoyl‐Transfer Reactivity in Crystals by Growing a “Reactive” Metastable Polymorph by Using a Chiral Additive

Racemic 2,4‐di‐O‐benzoyl‐myo‐inositol‐1,3,5‐orthoacetate, which normally crystallizes in a monoclinic form (form I, space group P2₁/n) could be persuaded to crystallize out as a metastable polymorph (form II, space group C2/c) by using a small amount of either D ‐ or L ‐ 2,4‐di‐O‐benzoyl‐myo‐inositol‐1,3,5‐orthoformate as an additive in the crystallization medium. The structurally similar enantiomeric additive was chosen by the scrutiny of previous experimental results on the crystallization of racemic 2,4‐di‐O‐benzoyl‐myo‐inositol‐1,3,5‐orthoacetate. Form II crystals can be thermally transformed to form I crystals at about 145 °C. The relative organization of the molecules in these dimorphs vary slightly in terms of the helical assembly of molecules, that is, electrophile (El)???nucleophile (Nu) and C? H???π interactions, but these minor variations have a profound effect on the facility and specificity of benzoyl‐group‐transfer reactivity in the two crystal forms. While form II crystals undergo a clean intermolecular benzoyl‐group‐transfer reaction, form I crystals are less reactive and undergo non‐specific benzoyl‐group transfer leading to a mixture of products. The role played by the additive in fine‐tuning small changes that are required in the molecular packing opens up the possibility of creating new polymorphs that show varied physical and chemical properties. Crystals of D ‐2,6‐di‐O‐benzoyl‐myo‐inositol‐1,3,5‐orthoformate (additive) did not show facile benzoyl‐group‐transfer reactivity (in contrast to the corresponding racemic compound) due to the lack of proper juxtaposition and assembly of molecules.     

Dipolar S=O...C=O and C—H...O interactions in the molecular organization of 4,6‐di‐O‐acetyl‐2‐O‐tosyl‐myo‐inositol 1,3,5‐orthoesters

In the absence of conventional hydrogen bonding, the molecules of 4,6‐di‐O‐acetyl‐2‐O‐tosyl‐myo‐inositol 1,3,5‐orthoformate, C₁₈H₂₀O₁₀S, (I), and 4,6‐di‐O‐acetyl‐2‐O‐tosyl‐myo‐inositol 1,3,5‐orthobenzoate, C₂₄H₂₄O₁₀S, (II), are associated via C—H...O interactions. Molecules of (II) are additionally linked via dipolar S=O...C=O contacts. It is interesting to note that the sulfonyl O atom involved in the dipolar S=O...C=O contacts does not take part in any other interaction, indicating the competitive nature of this contact relative to the weak hydrogen‐bonding interactions.     

Water‐mediated intermolecular interactions in 1,2‐O‐cyclohexylidene‐myo‐inositol: a quantitative analysis

The syntheses of new myo‐inositol derivatives have received much attention due to their important biological activities. 1,2‐O‐Cyclohexylidene‐myo‐inositol is an important intermediate formed during the syntheses of certain myo‐inositol derivatives. We report herein the crystal structure of 1,2‐O‐cyclohexylidene‐myo‐inositol dihydrate, C₁₂H₂₀O₆·2H₂O, which is an intermediate formed during the syntheses of myo‐inositol phosphate derivatives, to demonstrate the participation of water molecules and hydroxy groups in the formation of several intermolecular O—H…O interactions, and to determine a low‐energy conformation. The title myo‐inositol derivative crystallizes with two water molecules in the asymmetric unit in the space group C 2/c , with Z = 8. The water molecules facilitate the formation of an extensive O—H…O hydrogen‐bonding network that assists in the formation of a dense crystal packing. Furthermore, geometrical optimization and frequency analysis was carried out using density functional theory (DFT) calculations with B3LYP hybrid functionals and 6‐31G(d), 6‐31G(d,p) and 6‐311G(d,p) basis sets. The theoretical and experimental structures were found to be very similar, with only slight deviations. The intermolecular interactions were quantitatively analysed using Hirshfeld surface analysis and 2D (two‐dimensional) fingerplot plots, and the total lattice energy was calculated.     

Triallyl monomer bearing adamantane‐like core derived from naturally occurring myo‐inositol: Synthesis and polyaddition with dithiols

This paper deals with a triallyl monomer bearing a rigid adamantane‐like core derived from myo‐inositol, a naturally occurring cyclic hexaol. The core structure of the monomer can be readily constructed by orthoesterification of myo‐inositol. The polyaddition of the triallyl monomer with dithiols based on the thermally induced radical thiol‐ene reaction gives the corresponding networked polymers. These networked polymers exhibit much higher thermal stability than the comparative networked polymers obtained from a triallyl monomer bearing less rigid cyclohexyl core. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1193–1199     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

Synthesis,characterization, and ion‐complexing properties of polymers displaying densely packed arrays of crown‐ethers as lateral substituents

We report the synthesis and ion‐binding properties of four poly(crown‐ethers) displaying either one or two crown‐ethers (15‐crown‐5 or 18‐crown‐6) on every third carbon alongside the backbone. The polymers were synthesized by living anionic ring‐opening polymerization of disubstituted cyclopropane‐1,1‐dicarboxylates monomers. Cation binding of the polychelating polymers and corresponding monomers to Na⁺ and K⁺ was evaluated by picrate extraction and isothermal calorimetry titration. This novel family of poly(crown‐ethers) demonstrated excellent initial binding of the alkali ions to the polymers, with a higher selectivity for potassium. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2337–2345     

Synthesis and characterization of poly(arylene ether sulfone)s with trans‐1,4‐cyclohexylene ring containing ester linkages

trans‐1,4‐Cyclohexylene ring containing acid chloride monomers were incorporated into poly(arylene ether sulfone) (PAES) backbones to study their effect on mechanical and thermal properties. The trans‐1,4‐cyclohexylene ring containing acid chloride monomers were synthesized and characterized by NMR and high‐resolution mass spectrum. trans‐1,4‐Cyclohexylene containing PAESs were synthesized from the acid chloride monomers and hydroxyl terminated polysulfone oligomers with a pseudo‐interfacial method and a solution method. These PAESs, with trans‐1,4‐cyclohexylene ring containing ester linkages, were fully characterized by NMR, thermogravimetric analysis, differential scanning calorimetry (DSC), size exclusion chromatography, and dynamic mechanical analysis (DMA). The tensile properties were also evaluated. The polymers made with the pseudo‐interfacial method had relatively low molecular weights when compared to the solution method where much higher molecular weight polymers were obtained. Crystallinity was promoted in the low molecular weight biphenol‐based PAES samples with the pseudo‐interfacial method. The crystallinity was confirmed by both the DSC and the wide angle X‐ray diffraction results. The tensile test results of the high molecular weight polymers suggested that incorporation of the trans‐1,4‐cyclohexylene ring containing linkage slightly improved the ultimate elongations while maintaining the Young's moduli. The trans‐1,4‐cyclohexylene ring containing PAESs also showed higher sub‐T_g relaxations in DMA when compared with their terephthaloyl containing analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of high‐performance polyurethanes with rigid 5‐6‐5‐fused ring system in the main chain from naturally occurring myo‐inositol

A bisketal of myo‐inositol was used as a diol‐type monomer for synthesis of polyurethanes. The monomer was obtained by treatment of myo‐inositol with 1,1‐dimethoxycyclohexane in the presence of p‐toluenesulfonic acid as a catalyst. The ketalization resulted in the formation of a 5‐6‐5‐fused ring system, which endowed the diol‐type monomer with high rigidity. The diol readily reacted with diisocyanate to give the corresponding polyurethane, which exhibited excellent heat resistance due to the rigid 5‐6‐5 system in the main chain. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3956–3963     

New biodegradable polymers from renewable sources: Polyester‐carbonates based on 1,3‐propylene‐co‐1,4‐cyclohexanedimethylene succinate

α,ω‐Dihydroxy‐terminated copolymeric oligomers of a 1,3‐propylene/1,4‐cyclohexanedimethylene succinate structure were obtained by the thermal polycondensation of 1,3‐propanediol/1,4‐cyclohexanedimethanol/succinic acid mixtures. They were subsequently chain‐extended via phosgene synthesis to high molecular weight aliphatic/alicyclic copolyester‐carbonates. These new polymers, besides having a biodegradable backbone, originate from two monomers, namely, 1,3‐propanediol and succinic acid, which can be obtained by renewable sources. Therefore, they have a potential as environmentally friendly materials. All synthesized materials were characterized in reference to their molecular structure by ¹H NMR and ¹³C NMR. Their molecular weights and molecular weight distributions were determined by size exclusion chromatography, and their main thermal properties were measured by DSC. Spectroscopic characterizations were in full agreement with the proposed structures. 1,4‐Cyclohexanedimethanol was used as a diol comonomer to improve the overall thermal properties of poly(1,3‐propylene succinate). The results of the characterization performed show that the initial expectations were only partially satisfied. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2508–2519, 2001     

Synthesis of asymmetrically substituted head‐to‐head polyacetylenes from 2,3‐disubstituted‐1,3‐butadienes

Asymmetrically substituted head‐to‐head polyacetylenes with phenyl and triphenylamine, thienyl or pyrenyl side groups were synthesized through anionic or controlled radical polymerization of 2,3‐disubstituted‐1,3‐butadienes and subsequent dehydrogenation process. Anionic polymerizations of the designed monomers bearing pendent triphenylamine and thienyl group gave narrow disperse disubstituted precursor polybutadienes with exclusive 1,4‐ or 4,1‐structure, which were confirmed by GPC and NMR measurements. In addition, the monomers possessing pyrenyl group were polymerized via nitroxide mediated radical polymerization and the resulting polymers were obtained with controlled molecular weight and low polydispersities. These polybutadiene precursors were then dehydrogenated in the presence of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone. Thus asymmetrically substituted head‐to‐head polyacetylenes were obtained as indicated by ¹H NMR. The properties of polybutadiene precursors and the corresponding polyacetylenes were analyzed by UV–vis, DSC, and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 395–402     

One‐pot synthesis of hyperbranched glycopolymers by RAFT polymerization

Soluble hyperbranched glycopolymers were prepared by copolymerization of glycan monomers with reversible addition‐fragmentation chain transfer polymerization (RAFT) inimers in a simple one‐pot reaction. Two novel RAFT inimers, 2‐(methacryloyloxy)ethyl 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoate (MAE‐CPP) and 2‐(3‐(benzylthiocarbonothioylthio)propanoyloxy)ethyl acrylate (BCP‐EA) were synthesized and used to prepare hyperbranched glycopolymers. Two types of galactose‐based saccharide monomers, 6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐M) and 6‐O‐(2′‐acrylamido‐2′‐methylpropanoate)‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐A), containing a methacrylate and an acrylamide group, respectively, were also synthesized and polymerized under the mediation of the MAE‐CPP and BCP‐EA inimers, respectively. In addition, hyperbranched poly(proGal‐M), linear poly(proGal‐A), and hyperbranched poly(proGal‐A) were generated and their polymerization kinetics were studied and compared. An unexpected difference was observed in the kinetics between the two monomers during polymerization: the relationship between polymerization rate and concentration of inimer was totally opposite in the two monomer–inimer systems. Branching analysis was conducted by using degree of branching (DB) as the measurement parameter. As expected, a higher DB occurred with increased inimer content. Furthermore, these polymers were readily deprotected by hydrolysis in trifluoroacetic acid solution resulting in water‐soluble polymers. The resulting branched glycopolymers have potential as biomimetics of polysaccharides. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Radical polymerizations of two stereoisomeric trimethacrylates with rigid adamantane‐like cores from naturally occurring myo‐inositol

Two stereoisomeric trimethacrylates, T1 and T2 , which share a common adamantane‐like rigid core, were synthesized from naturally occurring myo‐inositol, and their radical polymerization behaviors were investigated. For the synthesis of T1 , myo‐inositol was converted to triol 1 , bearing one equatorial hydroxyl group and two axial hydroxyl groups, by orthoesterification, which was used as a precursor. For the synthesis of T2 , 1 was converted to triol 2 , bearing three axial hydroxyl groups, which was used as a precursor. Investigations on the radical polymerization of T1 and T2 , which potentially accompanies the cyclopolymerization of the axially oriented methacrylate moieties, revealed significant differences between the two. (1) The polymerization of T1 affords networked and thus insoluble polymers PT1 , while that of T2 affords less crosslinked and thus soluble polymers PT2 . (2) The amount of residual methacrylate moieties was larger in PT2 than in PT1 . (3) PT2 had higher thermal stability than PT1 , though PT2 contained a larger amount of unreacted methacrylate moieties. These tendencies were successfully correlated with the difference in cyclopolymerization efficiency between the polymerizations of the two monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1743–1748     

Synthesis and properties of fluorinated polyimides based on 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene and various aromatic dianhydrides

A novel fluorinated diamine monomer, 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 2,5‐di‐tert‐butylhydroquinone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Fluorinated polyimides ( 5a – 5f ) were synthesized from diamine 2 and various aromatic dianhydrides ( 3a – 3f ) via thermal or chemical imidization. These polymers had inherent viscosities of 0.77–1.01 dL/g. The 5 series polyimides were soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, and N,N‐dimethylformamide and were even soluble in dioxane, tetrahydrofuran, and dichloromethane. 5 (C) showed cutoff wavelengths between 363 and 404 nm and yellowness index (b*) values of 6.5–40.2. The polyimide films had tensile strengths of 93–114 MPa, elongations to break of 9–12%, and initial moduli of 1.7–2.1 GPa. The glass‐transition temperatures were 255–288 °C. The temperatures of 10% weight loss were all above 460 °C in air or nitrogen atmospheres. In comparison with a nonfluorinated polyimide series based on 1,4‐bis(4‐aminophenoxy)‐2,5‐di‐tert‐butylbenzene, the 5 series showed better solubility and lower color intensity, dielectric constants, and moisture absorption. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2272–2284, 2004     

Aromatic poly(1,3,4‐oxadiazole)s and poly(amide‐1,3,4‐oxadiazole)s containing ether sulfone linkages

Polyhydrazides and poly(amide‐hydrazide)s were prepared from two ether‐sulfone‐dicarboxylic acids, 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoic acid and 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoic acid, or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, and p‐aminobenzhydrazide via a phosphorylation reaction or a low‐temperature solution polycondensation. All the hydrazide polymers were found to be amorphous according to X‐ray diffraction analysis. They were readily soluble in polar organic solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide and could afford colorless, flexible, and tough films with good mechanical strengths via solvent casting. These hydrazide polymers exhibited glass‐transition temperatures of 149–207 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the solid state at elevated temperatures. Although the oxadiazole polymers showed a significantly decreased solubility with respect to their hydrazide prepolymers, some oxadiazole polymers were still organosoluble. The thermally converted oxadiazole polymers had glass‐transition temperatures of 217–255 °C and softening temperatures of 215–268 °C and did not show significant weight loss before 400 °C in nitrogen or air. For a comparative study, related sulfonyl polymers without the ether groups were also synthesized from 4,4′‐sulfonyldibenzoic acid and the hydrazide monomers by the same synthetic routes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2271–2286, 2001     

Synthesis of Poly(Arylene Alkenylene)s by Pd‐Catalyzed Three‐Component Coupling Polycondensation of Diiodoarenes,Non‐Conjugated Dienes,and Nucleophiles that Involves Chain Walking Isomerization

The Pd‐catalyzed three‐component coupling polycondensation of diiodoarenes, nonconjugated dienes, and carbonucleophiles afforded poly(arylene alkenylene)s with moderate molecular weight in good yield. The reaction involves Mizoroki‐Heck coupling, olefin migration via chain walking, and addition of the carbonucleophile to the resulting π‐allylpalladium species. The polymerization with a slight excess of nucleophile with respect to diiodoarene also proceeded to give the polymer without significant decrease in molecular weight in spite of the nonstoichiometric mixture of the monomers. The Pd‐catalyzed three‐component coupling polycondensation of diiodoarenes, nonconjugated dienes, and diimide also proceeded. The base used in the reaction is critical for yield and molecular weight of the product. The reaction using NaHCO₃ afforded the product with low solubility, which can be explained by the high molecular weight of the polymer and/or the strong interaction of the electron donating dimethoxyphenylene groups and electron accepting diimide groups in the polymer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2535–2542     

Different interaction motifs of dipolar S=O...C=O contacts that associate diastereomers of 2,4(6)‐di‐O‐benzoyl‐6(4)‐O‐{[(1S)‐7,7‐dimethyl‐2‐oxobicyclo[2.2.1]heptan‐1‐ylmethyl]sulfonyl}‐myo‐inositol 1,3,5‐orthoacetate

Diastereomeric mixtures of 2,4(6)‐di‐O‐benzoyl‐6(4)‐O‐[(1S)‐10‐camphorsulfonyl]‐myo‐inositol 1,3,5‐orthoesters associate in their crystal structures via different geometries of S=O...C=O short contacts, depending upon the substitution. A comparison of the dimeric association in the orthoacetate and orthoformate (solvated) derivatives shows a sheared parallel motif of dipolar S=O...C=O contacts bridging the former, whereas perpendicular S=O...C=O contacts occur in the latter. The title compound, C₃₂H₃₄O₁₁S, is chiral, owing to the presence of the camphor moiety.