An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

Immobilization,characterization, and laboratory-scale application of bovine liver arginase

Arginase isolated from beef liver was covalently attached to a polyacrylamide bead support bearing carboxylic groups activated by a water-soluble carbodiimide. The most favorable carbodiimide wasN-cyclohexyl-Nt’-(methyl-2-p-nitrophenyl-2-oxoethyl) aminopropyl carbodiimide methyl bromide, but for practical purposes,N-cyclohexyl-Nt’-morpholinoethyl carbodiimide methyl tosylate was used. The optimal conditions for the coupling procedure were determined. The catalytic activity of the immobilized arginase was 290–340 U/g solid or 2.9–3.4 U/mL wet gel. The pH optimum for the catalytic activity was pH 9.5, the apparent temperature maximum was at 60°C and K_mapp was calculated to be 0.37M L-arginine. Immobilization markedly improved the conformational stability of arginase. At 60°C, the pH for maximal stability was found to be 8.0. The immobilized arginase was used for the production of L-ornithine and D-arginine.     

Preparation of bismuth sulfide nanoparticles as targeted biocompatible nano-radiosensitizer and carrier of methotrexate

In this study, Bi₂S₃@BSA–Bio–MTX nanoparticles (NPs) were synthesized for the first time by bovine serum albumin (BSA)-mediated biomineralization (Bi₂S₃@BSA NPs) followed by covalent bonding of biotin (Bio) and methotrexate (MTX) on the surface of the Bi₂S₃@BSA NPs via carbodiimide chemistry. The synthesized NPs were globular and exhibited uniform morphology with a hydrodynamic diameter of 107.6 ± 6.81 nm (mean ± standard deviation) and zeta potential of −20.9 ± 2.18 mV. Drug release from Bi₂S₃@BSA–Bio–MTX NPs indicated an enzyme-dependent release pattern. The in vitro biocompatibility of NPs was confirmed by investigating their cytotoxicity against the HEK-293 cell line and hemolysis assay test, whereas the in vivo biocompatibility of the NPs was evaluated and confirmed by the lethal dose 50 (LD₅₀) test. To evaluate the in vitro anticancer activity of the functionalized NPs and MTX, their cytotoxic effects was assessed against 4T1 cancer cells by 5-dimethylthiazol-z-yl)-2,5-diphenyltetrazolium bromide (MTT) assay with and without X-ray radiation. Results showed that Bi₂S₃@BSA–Bio–MTX NPs have excellent anticancer activity, especially following X-ray radiation.     

Thermal stability,morphology and electronic band gap of Zn(NCN)

The thermal behavior of zinc carbodiimide Zn(NCN) was examined in the temperature range between 200 and 1100 °C in Ar atmosphere. The material starts to partially decompose at about 800 °C. Heat treatment at temperatures beyond 800 °C results in the formation of the byproducts nitrogen-containing bamboo-like multiwall carbon-nanotubes of 20–50 nm in diameter due to a partial decomposition of Zn(NCN) into dicyan (CN)₂, zinc and nitrogen gas followed by the polymerization of the former product to paracyanogen (CN)_n. At 1100 °C, the yield of the residual carbodiimide depends on the dwelling time and the initial amount of powder used for pyrolysis. One hour dwelling at 1100 °C yields ∼50% of the Zn(NCN) separated as pure material. Temperature-induced change in the band structure, namely indirect-to-direct band gap transition, is registered when compared the Zn(NCN) at room temperature with the residual material annealed at 1100 °C. The transition from indirect (E_g = 4.32 eV) to direct band gap (E_g = 4.93 eV) is due to the thermal annealing process which results in healing of crystal defects.     

Structural changes in β-lactoglobulin by conjugation with three different kinds of carboxymethyl cyclodextrins

β-Lactoglobulin-carboxymethyl cyclodextrin (β-LG-CMCyD) conjugates were prepared by using water soluble carbodiimide. Three kinds of CMCyDs differing in molecular mass were used to investigate the effects of different CMCyD contents, net charge and hydrophobicity on the structural changes in β-lactoglobulin. The effect of CMCyDs on the structure of β-lactoglobulin was utilized to investigate the contribution of hydrophobic interactions to the stability of the protein. Spectroscopic studies suggested that the conformation around had not changed in either conjugate but the α-helix content of β-LG-CMCyD conjugates had markedly increased as compared with that of β-lactoglobulin. The differential scanning calorimetry technique confirmed that the addition of one glucose unit in β-LG-CMCyD conjugates, enthalpy change of calorimetry decreased and the denaturation temperature of each conjugate was higher than that of native β-lactoglobulin. The heat contents agreed well with the conformational transition measured by molar ellipticity at 222 nm ([θ]₂₂₂) and Stoke's radius (R_S) values. Therefore, hydrophobic forces play an important role in stabilizing and shielding of the β-LG-CMCyD conjugates.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Generation of anti-trenbolone monoclonal antibody and establishment of an indirect competitive enzyme-linked immunosorbent assay for detection of trenbolone in animal tissues, feed and urine

Trenbolone (TRE) is a steroid used by veterinarians on livestock to increase appetite and body weight. The use of TRE has been restricted because of its harmful side effect for consumers. To effectively control TRE residue in food and food product, a rapid and convenient immunoassay was developed by preparing an anti-TRE monoclonal antibody. The immunogen and coating antigen were prepared by coupling TRE hapten with carrier proteins via 1-ethyl-3-(dimethylaminopropyl)carbodiimide hydrochloride (EDC) method. The optimized method gave an average IC₅₀ value of 0.323 ng mL⁻¹ towards TRE and an average detection limit (LOD) of 0.06 ng mL⁻¹, which is much lower than the maximum residue levels (2.0 ng g⁻¹) accepted by the Joint FAO/WHO Expert Committee on Food Additives (JECFA). The specificity of the antibody was evaluated by measuring cross-reactivity of six structurally related compounds, including 19-nortestosterone (9.7%), testosterone (0.13%), methyltestosterone (<0.01%), methandrostenolone (<0.01%), (+)-dehydroisoandrosterone (<0.001%) and β-estradiol (<0.001%). The recovery rates of the test in detection of TRE-fortified animal tissue, urine and animal feed samples were in the range of 81.3-89.4%, while the intra- and inter-assay coefficients of variation were less than 12.0%.     

Cycloelimination of Imidazolidin‐2‐ylidene N‐Heterocyclic Carbenes: Mechanism and Insights into the Synthesis of Stable “NHC‐CDI” Amidinates

We report the discovery that 1,3‐bis(aryl)imidazolidin‐2‐ylidenes, one of the most widely studied classes of N‐heterocyclic carbenes (NHCs), undergo quantitative conversion to zwitterionic “NHC‐CDI” amidinates upon heating to ≈100 °C in solution. The mechanism of this novel NHC decomposition process is studied in detail. These studies enabled the rational synthesis of a new class of bench stable amidinates from a panel of NHCs and carbodiimides. We expect these constructs to find utility in a variety of applications.