Fluorinated ketones in the Baylis-Hillman reaction

Hexafluoroacetone, bromopentafluoroacetone, 1,3-dichloro-1,1,3,3-tetrafluoroacetone, and trifluoropyruvic acid methyl ester react with ethyl acrylate, acrylonitrile, acrolein, and methyl vinyl ketone in the presence of 1,4-diazabicyclo[2,2,2]octane with the formation of -alkylation products.A. N. Nesmeyanov Institute of Heteroorganic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2763–2767, December, 1992.     

Quaternized amino functionalized cross-linked polyacrylamide as a new solid-liquid phase transfer catalyst in reduction of carbonyl compounds with NaBH4

Poly[N-(2-aminoethyl)acrylamido]trimethyl ammonium chloride resin was developed as a new polymeric phase transfer catalyst. This quaternized polyacrylamide catalyzed the chemoselective reduction of aldehydes and ketones by NaBH₄ to give corresponding alcohols in high yields under mild conditions.     

Characterisation and determination of fullerenes: A critical review

A prominent sector of nanotechnology is occupied by a class of carbon-based nanoparticles known as fullerenes. Fullerene particle size and shape impact in how easily these particles are transported into and throughout the environment and living tissues. Currently, there is a lack of adequate methodology for their size and shape characterisation, identification and quantitative detection in environmental and biological samples. The most commonly used methods for their size measurements (aggregation, size distribution, shape, etc.), the effect of sampling and sample treatment on these characteristics and the analytical methods proposed for their determination in complex matrices are discussed in this review. For the characterisation and analysis of fullerenes in real samples, different analytical techniques including microscopy, spectroscopy, flow field-flow fractionation, electrophoresis, light scattering, liquid chromatography and mass spectrometry have been reported. The existing limitations and knowledge gaps in the use of these techniques are discussed and the necessity to hyphenate complementary ones for the accurate characterisation, identification and quantitation of these nanoparticles is highlighted.     

Lewis acid mediated SN2-type nucleophilic ring opening followed by [4+2] cycloaddition of N-tosylazetidines with aldehydes and ketones: synthesis of chiral 1,3-oxazinanes and 1,3-amino alcohols

A highly efficient strategy for Cu(OTf)₂ mediated S_N2-type nucleophilic ring opening followed by [4+2] cycloaddition reactions of enantiopure 2-phenyl-N-tosylazetidines with various aldehydes and ketones afforded a variety of substituted 1,3-oxazinanes and 1,3-amino alcohols in excellent yields, excellent de and good to excellent ee. The proposed S_N2-type mechanism of the cycloaddition reaction is supported by experimental evidence.     

Recyclable gallium(III) triflate-catalyzed [4+3] cycloaddition for synthesis of 2,4-disubstituted-3H-benzo[b][1,4]diazepines

Simple and efficient Ga(OTf)₃-catalyzed [4+3] cycloaddition of 1,3-diarylpropynones and o-phenylenediamines is developed for the preparation of 2,4-disubstituted-3H-benzo[b][1,4]diazepines. The reaction has advantages of using a green solvent, generating a minimal amount of waste, and easy catalyst recycle.     

An efficient synthetic route to substituted tetrahydropyrimidines by Cu(OTf)2-mediated nucleophilic ring-opening followed by the [4+2] cycloaddition of N-tosylazetidines with nitriles

A highly efficient strategy for Cu(OTf)₂-mediated S_N2 type nucleophilic ring-opening followed by the [4+2] cycloaddition reactions of a number of 2-aryl-N-tosylazetidines with nitriles to afford a variety of substituted tetrahydropyrimidines in excellent yields is reported. The resulting tetrahydropyrimidines could easily be transformed into synthetically important 1,3-diamines by acid-catalyzed hydrolysis. The strategy has been extended to the synthesis of enantiomerically pure tetrahydropyrimidines from enantiopure disubstituted azetidines. The reaction proceeds through an S_N2 type mechanism as proposed by us earlier.     

Synthesis of the end-capped 5-(N,N-dimethylamino)naphthyl-1-ethynyl derivatives and their 1,4-di[5-(N,N-dimethylamino)naphthyl]-1,3-butadiynes: anti rotamer structure

A new family of the end-capped 5-(N,N-dimethylamino)naphthylethynyl chains were synthesized, as terminal acetylenes or poly(yne) structures, by heterocoupling between 5-iodo-N,N-dimethylnaphthalen-1-amine and 2-methyl-3-butyn-2-ol or 4-(5-iodo-1-naphthyl)-2-methyl-3-butyn-2-ol, catalyzed by the palladium-copper system. Catalytic homocoupling of the terminal acetylenes, affords to 1,4-dinaphthyl-1,3-butadiyne nanostructures. X-ray diffraction analysis of 1,4-di(α-naphthyl)-1,3-butadiyne shows that the naphthalene rings are in the anti configuration along the acetylene axis. All the conjugated compounds show an important fluorescent emission radiation.     

A direct fluorescence-on chemo-sensor for selective recognition of Zn(II) by a lower rim 1,3-di-derivative of calix[4]arene possessing bis-{N-(2-hydroxynaphthyl-1-methylimine)} pendants

The bis-{N-(2-hydroxynaphthyl-1-methylimine)} anchored 1,3-di-derivative of lower rim p-tert-butyl-calix[4]arene possessing a N₂O₂, N₂O₄ or N₂O₆ binding core was found to be selective for Zn(II) ions even at ?60 ppb by eliciting fluorescence-on behaviour while the other ions, viz., Ti⁴⁺, VO²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Mg²⁺, Cd²⁺ and Hg²⁺ caused no change in the fluorescence. The reaction between 1 and Zn²⁺ was found to be stoichiometric with the formation of a 1:1 complex; while H⁺ quenched the fluorescence of the complex, OH⁻ restored it. The studies of the 1:1 isolated complexes of Zn²⁺, Ni²⁺ and Cu²⁺ augmented the results.     

Synthesis and dichromate anion extraction ability of p-tert-butylcalix[4]arene diamide derivatives with different binding sites

The article describes the synthesis and evaluation of the dichromate anion (Cr₂O₇²⁻/HCr₂O₇⁻) extraction properties of p-tert-butylcalix[4]arene diamide derivatives (5-7) containing different binding sites. Among these compounds, 6 and 7 have been synthesized via aminolysis in a toluene-methanol solvent system with 3-aminomethylpyridine and 3,6-dioxa-1,8-diamino octane, respectively. On the other hand, compound 5 has been synthesized via an acid chloride method due to its inefficiency under aminolysis. The extraction properties of these diamides toward dichromate anions are studied by liquid-liquid extraction. The results show that p-tert-butylcalix[4]arene diamide derivative 7 exhibited a much higher affinity toward dichromate anions than that of 6 due to its special structure, while 5 was an ineffective ligand for these anions.     

The Electronic Nature of the P=C Bond

Abstract

The influence of substituents at the carbon of the P=C bond of about 60 phosphaalkenes was investigated by ³¹P NMR spectroscopy. The P=C system is characterized as electronwithdrawing. All compounds were found to be configurationally stable.     

Hydrogen ion-selective poly(vinyl chloride) membrane electrode based on a p-tert-butylcalix[4]arene-oxacrown-4

A hydrogen ion-selective poly(vinyl chloride) (PVC) membrane electrode was developed using p-tert-butylcalix[4]arene-oxacrown-4 as ionophore. Apart from the ionophore, plasticisers and lipophilic anions were blended, in various proportions, with PVC in tetrahydrofurane and mixtures so prepared were poured onto glass surfaces to form the membrane. 2-Nitrophenylpentylether has proved to be the best alternative as plasticiser and the lipophilic anions tried have turned out to have an adverse effect on the pH response. The electrode of the optimum characteristics had a composition of 2% p-tert-butylcalix[4]arene-oxacrown-4, 68.3% o-NPPE and 29.7% PVC. The electrode showed an apparent Nernstian response in the pH range 2-11 with a slope of 54.2±0.4 mV pH⁻¹ at 20±1 °C. It has a rapid potential-response to changes of pH, high ion selectivity towards lithium, sodium and potassium, and other characteristics comparable to those reported for the conventional pH glass membrane electrode. It appears to be a suitable potentiometric indicator electrode specifically for hydrofluoric acid solutions.     

Novel 1,3-dipolar cycloaddition reactions of calix[4]bis(spirodienones): synthesis of isoxazolidine derived macrocycles

Calix[4]bis(spirodienones) can perform as either 4π or 2π components in cycloaddition reactions with various carbo- and hetero-dienophiles and with 1,2-benzoquinones leading to the formation of highly functionalized macrocycles. In this Letter we report, highly regio- and stereoselective 1,3-dipolar cycloaddition reactions of a bis(spirodienone) derivative of calix[4]arene with nitrones that provide easy access to isoxazolidine derived macrocycles in excellent yields. These isoxazolidine derivatives can be considered as direct precursors of 1,3-amino alcohols.     

Regioselective ipso formylation of p-tert-butylcalix[4]arene

A convenient procedure for direct introduction of one formyl group into p-tert-butylcalix[4]arenes through ipso substitution is described.     

A straightforward preparation of benzo[f]naphtho[b][1,4]oxazepines from TNT

2,4,6-Trinitrotoluene readily reacts with 1-nitroso-2-naphthol to afford 9,11-dinitrobenzo[f]naphtho[2,1-b][1,4]oxazepine. The nitro groups of the latter undergo displacement by O- and S-nucleophiles with preferential substitution of the 11-NO₂ (peri-nitro group). The structures of the substitution products are confirmed by X-ray diffraction and ¹H NMR NOE experiments.     

Multicomponent Domino Process for the Synthesis of Some Novel Benzo[a]chromenophenazine Fused Ring Systems Using H2SO4, Phosphotungstic Acid,and [NMP]H2PO4

Efficient, mild, and quantitative procedures for the synthesis of functionalized benzo[c]chromeno[2,3-a]phenazine derivatives by one-pot, four-component condensation of 2-hydroxynaphthalene-1,4-dione, 1,2-phenylenediamines, aromatic aldehydes, and cyclic 1,3-dicarbonyl compounds have been developed using catalytic amounts of H₂SO₄ and phosphotungstic acid in EtOH/H₂O (1:1) under reflux and also with [NMP]H₂PO₄, which acts as catalyst and medium at 80 °C. The reaction avoids tedious workup procedure due to the direct precipitation of products from the reaction medium. The present finding provides promising synthetic strategies for the synthesis of libraries with functional group diversity.     

Langmuir-Blodgett film of p-tert-butylthiacalix[4]arene modified glassy carbon electrode as voltammetric sensor for the determination of Hg(II)

The π-A isotherms and UV-vis spectra of the transferred films suggested that the monolayer of p-tert-butylthiacalix[4]arene can coordinate with Hg²⁺ at the air-water surface. From these observations, a glassy carbon electrode coated with Langmuir-Blodgett film of p-tert-butylthiacalix[4] arene as a new voltammetric sensor is designed for the determination of trace amounts of Hg²⁺. Compared with bare glassy carbon electrode and modified glassy carbon electrode using direct coating method, the Langmuir-Blodgett film-modified electrode can greatly improve the measuring sensitivity of Hg²⁺. Under the selected conditions, the Langmuir-Blodgett film-modified electrode in 0.1 mol L⁻¹ H₂SO₄ + 0.01 mol L⁻¹ KCl solution shows a linear voltammetric response for Hg²⁺ in the range of 5.0 × 10⁻¹⁰ to 1.5 × 10⁻⁷ mol L⁻¹, with a detection limit of 2.0 × 10⁻¹⁰ mol L⁻¹. The proposed method was also applied to determine Hg²⁺ in water samples (tap, lake and river water). In addition, the fabricated electrode exhibited a distinct advantage of simple preparation, non-toxicity, good reproducibility and good stability.     

Determination of low level methyl tert-butyl ether, ethyl tert-butyl ether and methyl tert-amyl ether in human urine by HS-SPME gas chromatography/mass spectrometry

Methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME) are oxygenated compounds added to gasoline to enhance octane rating and to improve combustion. They may be found as pollutants of living and working environments. In this work a robotized method for the quantification of low level MTBE, ETBE and TAME in human urine was developed and validated. The analytes were sampled in the headspace of urine by SPME in the presence of MTBE-d12 as internal standard. Different fibers were compared for their linearity and extraction efficiency: carboxen/polydimethylsiloxane, polydimethylsiloxane/divinylbenzene, and polydimethylsiloxane. The first, although highly efficient, was discarded due to deviation of linearity for competitive displacement, and the polydimethylsiloxane/divinylbenzene fiber was chosen instead. The analysis was performed by GC/MS operating in the electron impact mode. The method is very specific, with range of linearity 30-4600 ng L⁻¹, within- and between-run precision, as coefficient of variation, <22 and <16%, accuracy within 20% the theoretical level, and limit of detection of 6 ng L⁻¹ for all the analytes. The influence of the matrix on the quantification of these ethers was evaluated analysing the specimens of seven traffic policemen exposed to autovehicular emissions: using the calibration curve and the method of standard additions comparable levels of MTBE (68-528 ng L⁻¹), ETBE (<6 ng L⁻¹), and TAME (<6 ng L⁻¹) were obtained.