Rhodium(I) and Silver(I) Complexes of 4, 5‐Dicyano‐1, 3‐dimesityl‐ and 4, 5‐Dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene

The new N‐heterocyclic carbene (NHC) precursors 4, ‐dicyano‐1, ‐dimesityl‐ ( 9 ) and 4, 5‐dicyano‐1, 3‐dineopentyl‐2‐(pentafluorophenyl)imidazoline ( 14 ) were synthesized. The structure of 9 could be determined by X‐ray crystallography. With the 2‐pentafluorophenyl‐substituted imidazolines 9 and 14 , the [AgCl(NHC)], [RhCl(COD)(NHC)], and [RhCl(CO)₂(NHC)] complexes [NHC = 4, 5‐dicyano‐1, 3‐dimesitylimidazol‐2‐ylidene ( 3 ) and 4, 5‐dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene ( 4 )] were obtained. Crystal structures of [AgCl( 3 )] ( 15 ), [RhCl(COD)( 3 )] ( 17 ), [RhCl(COD)( 4 )] ( 18 ), and [RhCl(CO)₂( 3 )] ( 19 ) were solved and with the crystal data of 19 , the percent buried volume ( %V_bur) of 31.8(±0.1) % was determined for NHC 3 . Infrared spectra of the imidazolines 9 and 14 and of the complexes 15 – 20 were recorded and the CO stretching frequencies of complexes 19 and 20 were used to determine the Tolman electronic parameters of the newly obtained NHCs 3 (TEP: 2060 cm^–1) and 4 (TEP: 2061 cm^–1), thus proving that 1, 3‐substitution of maleonitrile‐NHCs does not have a significant effect for the high π‐acceptor strength of these carbenes.     

Thermochemistry of N‐heterocyclic carbenes with 5‐, 4‐, 3‐, and 2‐membered rings

N‐heterocyclic carbenes (NHCs) based on imidazole‐2‐ylidene ( 1 ) or the saturated imidazolidine‐2‐ylidene ( 2 ) scaffolds are long‐lived singlet carbenes. Both benefit from inductive stabilization of the sigma lone pair on carbon by neighboring N atoms and delocalization of the N pi lone pairs into the nominally vacant p‐pi atomic orbital at the carbene carbon. With thermochemical schemes G4 and CBS‐QB3, we estimate the relative thermodynamic stabilization of smaller ring carbenes and acyclic species which may share the keys to NHC stability. These include four‐membered ring systems incorporating the carbene center, two trivalent N centers, and either a boron or a phosphorus atom to complete the ring. Amino‐substituted cyclopropenylidenes have been reported but three‐membered rings containing the carbene center and two N atoms are not known. Our calculations suggest that amino‐substituted cyclopropenylidenes are comparable in stability to the four‐membered NHCs but that diazacyclopropanylidenes would be substantially less effectively stabilized. Concluding the series are acyclic carbenes with and without neighboring N atoms and a series of “two‐membered ring” azapropadienenylidene cations of form :C?N?W with W = an electron‐withdrawing agent. We have studied W = NO₂, CH₂(+), CF₂(+), and (CN)₂C(+). Although these systems display a degree of stabilization and carbene‐like electronic structure, the stability of the NHCs is unsurpassed. © 2014 Wiley Periodicals, Inc.     

Mono‐ and Bis(imidazolidinium ethynyl) Cations and Reduction of the Latter To Give an Extended Bis‐1,4‐([3]Cumulene)‐p‐carboquinoid System

An extended π‐system containing two [3]cumulene fragments separated by a p‐carboquinoid and stabilized by two capping N‐heterocyclic carbenes (NHCs) has been prepared. Mono‐ and bis(imidazolidinium ethynyl) cations have also been synthesized from the reaction of an NHC with phenylethynyl bromide or 1,4‐bis(bromoethynyl)benzene. Cyclic voltammetry coupled with synthetic and structural studies showed that the dication is readily reduced to a neutral, singlet bis‐1,4‐([3]cumulene)‐p‐carboquinoid as a result of the π‐accepting properties of the capping NHCs.     

Reaching for two new stable ambiphilic quinoline‐derived N‐heterocyclic carbenes at DFT level

A detailed investigation on the thermodynamic and kinetic stability of four carbenic tautomers of quinoline 1 , including quinoline‐2‐ylidene 2 , quinoline‐3‐ylidene 3 , quinoline‐4‐ylidene 4 , and 3,4‐dihydroquinoline‐4‐ylidene 5 , reveals that singlet planar six‐membered ring N‐heterocyclic carbenes (NHCs) 2 and 4 have less stability than Arduengo type NHC but seems to have enough conceivably for reaching at B3LYP/aug‐cc‐pVTZ//B3LYP/6–31+G* and B3LYP/6–311++G**//B3LYP/6–31+G* levels. All these six‐membered NHCs are extremely ambiphilic with the more nucleophilic and electrophilic characters compared to the Arduengo type one. The aromaticity of singlet 2 and 4 is a significant contributor to their stability which is confirmed through their Nucleus‐independent chemical shift(1)_zz values. Finally, among 2–5 , the normal NHC 2 is thermodynamically preferred but the remote NHC 4 is kinetically proffered over the other isomeric carbenes. The effects of different N‐ or C‐substituted NHCs of 2 are studied using appropriate isodesmic reactions. The trimethylsilyl substituent exhibits slightly larger carbene stabilization in quinoline‐derived NHCs than the pyridine analogue. © 2014 Wiley Periodicals, Inc.     

(NHC)NiH‐Catalyzed Regiodivergent Cross‐Hydroalkenylation of Vinyl Ethers with α‐Olefins: Syntheses of 1,2‐ and 1,3‐Disubstituted Allyl Ethers

Cross‐hydroalkenylation of a vinyl ether ( 1 ) with an α‐olefin ( 2 ) was first achieved by a set of [NHC‐Ni(allyl)]BAr^F (NHC=N‐heterocyclic carbene) catalysts. Both 1,2‐ and 1,3‐disubstituted allyl ethers were obtained, highly selectively, by using NHCs of different sizes. In contrast, the chemoselectivity (i.e., 1 as acceptor and 2 as donor) was controlled mostly by electronic effects through the catalyst–substrate interaction. Sterically bulkier alkenes ( 2 ) were used as preferred donors compared to smaller alkenes. This electronic effect also served as a basis for the first tail‐to‐head cross‐hydroalkenylations of 1 with either a vinyl silane or boronic ester.     

N‐Heterocyclic Carbene Catalyzed Enantioselective α‐Fluorination of Aliphatic Aldehydes and α‐Chloro Aldehydes: Synthesis of α‐Fluoro Esters,Amides, and Thioesters

The asymmetric fluorination of azolium enolates that are generated from readily available simple aliphatic aldehydes or α‐chloro aldehydes and N‐heterocyclic carbenes (NHCs) is described. The process significantly expands the synthetic utility of NHC‐catalyzed fluorination and provides facile access to a wide range of α‐fluoro esters, amides, and thioesters with excellent enantioselectivity. Pyrazole was identified as an excellent acyl transfer reagent for catalytic amide formation.     

N‐Heterocyclic Carbene Catalyzed Enantioselective α‐Fluorination of Aliphatic Aldehydes and α‐Chloro Aldehydes: Synthesis of α‐Fluoro Esters,Amides, and Thioesters

The asymmetric fluorination of azolium enolates that are generated from readily available simple aliphatic aldehydes or α‐chloro aldehydes and N‐heterocyclic carbenes (NHCs) is described. The process significantly expands the synthetic utility of NHC‐catalyzed fluorination and provides facile access to a wide range of α‐fluoro esters, amides, and thioesters with excellent enantioselectivity. Pyrazole was identified as an excellent acyl transfer reagent for catalytic amide formation.     

The influence of electronic modifications on rotational barriers of bis‐NHC‐complexes as observed by dynamic NMR spectroscopy

There has been much debate about the σ‐donor and π‐acceptor properties of N‐heterocyclic carbenes (NHCs). While a lot of synthetic modifications have been performed with the goal of optimizing properties of the catalyst to tune reactivity in various transformations (e.g. metathesis), direct methods to characterize σ‐donor and π‐acceptor properties are still few. We believe that dynamic NMR spectroscopy can improve understanding of this aspect. Thus, we investigated the intramolecular dynamics of metathesis precatalysts bearing two NHCs. We chose four systems with one identical NHC ligand (N,N′‐Bis(2,4,6‐trimethylphenyl)‐imidazolinylidene (SIMes) in all four cases) and NHC_ewg ligands bearing four different electron‐withdrawing groups (ewg). Both rotational barriers of the respective Ru‐NHC‐bonds change significantly when the electron density of one of the NHCs (NHC_ewg) is modified. Although it is certainly not possible to fully dissect σ‐donor and π‐acceptor portions of the bonding situations in the respective Ru‐NHC‐bond via dynamic NMR spectroscopy, our studies nevertheless show that the analysis of the rotation around the Ru‐SIMes‐bond can be used as a spectroscopic parameter complementary to cyclic voltammetry. Surprisingly, we observed that the rotation around the Ru‐NHC_ewg‐bond shows the same trend as the initiation rate of a ring‐closing metathesis of the four investigated bis‐NHC‐complexes. Copyright © 2013 John Wiley & Sons, Ltd.     

An N‐Heterocyclic‐Carbene‐Derived Distonic Radical Cation

We present the discovery of a novel radical cation formed through one‐electron oxidation of an N‐heterocyclic carbene–carbodiimide (NHC–CDI) zwitterionic adduct. This compound possesses a distonic electronic structure (spatially separate spin and charge regions) and displays persistence under ambient conditions. We demonstrate its application in a redox‐flow battery exhibiting minimal voltage hysteresis, a flat voltage plateau, high Coulombic efficiency, and no performance decay for at least 100 cycles. The chemical tunability of NHCs and CDIs suggests that this approach could provide a general entry to redox‐active NHC–CDI adducts and their persistent radical ions for various applications.     

Breslow Intermediates from Aromatic N‐Heterocyclic Carbenes (Benzimidazolin‐2‐ylidenes,Thiazolin‐2‐ylidenes)

We report the first generation and characterization of elusive Breslow intermediates derived from aromatic N‐heterocyclic carbenes (NHCs), namely benzimidazolin‐2‐ylidenes (NMR, X‐ray analysis) and thiazolin‐2‐ylidenes (NMR). In the former case, the diamino enols were generated by reaction of the free N,N‐bis(2,6‐diisopropylphenyl)‐ and N,N‐bis(mesityl)‐substituted benzimidazolin‐2‐ylidenes with aldehydes while the dimer of 3,4,5‐trimethylthiazolin‐2‐ylidene served as the starting material in the latter case. The unambiguous NMR identification of the first thiazolin‐2‐ylidene‐based Breslow intermediate rests on double ¹³C labeling of both the NHC and the aldehyde component. The acyl anion reactivity was confirmed by benzoin formation with excess aldehyde.     

Oxidative Addition of 2‐Halogenoazoles—Direct Synthesis of Palladium(II) Complexes Bearing Protic NH,NH‐Functionalized NHC Ligands

The chemistry of N‐heterocyclic carbenes (NHCs) is dominated by N,N′‐dialkylated or ‐diarylated derivatives. Such NHC ligands are normally obtained by C2‐deprotonation of azolium cations or by reductive elimination from azol‐2‐thiones. A simple one‐step procedure is described that leads to complexes with NH,NH‐functionalized NHC ligands by the oxidative addition of 2‐halogenoazoles to complexes of zero‐valent transition metals.     

N‐Heterocyclic‐Carbene‐Catalyzed Umpolung of Imines

N‐Heterocyclic carbene (NHC) catalysis has been widely used for the umpolung of aldehydes, and recently for the umpolung of Michael acceptors. Described herein is the umpolung of aldimines catalyzed by NHCs, and the reaction likely proceeds via aza‐Breslow intermediates. The NHC‐catalyzed intramolecular cyclization of aldimines bearing a Michael acceptor resulted in the formation of biologically important 2‐(hetero)aryl indole 3‐acetic‐acid derivatives in moderate to good yields. The carbene generated from the bicyclic triazolium salt was found to be efficient for this transformation.     

Facile Syntheses of N‐Heterocyclic Carbene Precursors through I2‐ or NIS‐Promoted Amidiniumation of N‐Alkenyl Formamidines

We have developed I₂‐ or N‐iodosuccinimide (NIS)‐mediated amidiniumation of N‐alkenyl formamidines for the syntheses of cyclic formamidinium salts, some of which could be directly used as N‐heterocyclic carbene (NHC) precursors. Treatment of iodine‐containing formamidinium salts with Al₂O₃ led to the formation of cyclic formamidinium salts with an unsaturated backbone. A rhodium(I) complex ligated by a representative NHC was prepared by the reaction of [Rh(cod)Cl]₂ (cod=1,5‐cyclooctadiene) with the free carbene obtained in situ from deprotonation of the corresponding formamidinium salts. The NHCs prepared in situ can also react with S₈ to afford the corresponding thiones.     

N‐Heterocyclic‐Carbene‐Treated Gold Surfaces in Pentacene Organic Field‐Effect Transistors: Improved Stability and Contact at the Interface

N‐Heterocyclic carbenes (NHCs), which react with the surface of Au electrodes, have been successfully applied in pentacene transistors. With the application of NHCs, the charge‐carrier mobility of pentacene transistors increased by five times, while the contact resistance at the pentacene–Au interface was reduced by 85 %. Even after annealing the NHC–Au electrodes at 200 °C for 2 h before pentacene deposition, the charge‐carrier mobility of the pentacene transistors did not decrease. The distinguished performance makes NHCs as excellent alternatives to thiols as metal modifiers for the application in organic field‐effect transistors (OFETs).     

Comparative Theoretical Study of N‐Heterocyclic Carbenes and Other Ligands Bound to AuI

The bonding strength of N‐heterocyclic carbene (NHC) ligands to a neutral AuCl test moiety are compared to that of several phosphanes and other ligands. Of the ligands studied, the NHCs clearly form the strongest bonds to AuCl. A simplified triangular CN₂ model is also introduced for the NHCs.     

Experimental and Theoretical Study of the Reactivity of Gold Nanoparticles Towards Benzimidazole‐2‐ylidene Ligands

The reactivity of benzimidazol‐2‐ylidenes with respect to gold nanoparticles (AuNPs) has been investigated using a combined experimental and computational approach. First, the grafting of benzimidazol‐2‐ylidenes bearing benzyl groups on the nitrogen atoms is described, and comparisons are made with structurally similar N‐heterocyclic carbenes (NHCs) bearing other N‐groups. Similar reactivity was observed for all NHCs, with 1) the erosion of the AuNPs under the effect of the NHC and 2) the formation of bis(NHC) gold complexes. DFT calculations were performed to investigate the modes of grafting of such ligands, to determine adsorption energies, and to rationalize the spectroscopic data. Two types of computational models were developed to describe the grafting onto large or small AuNPs, with either periodic or cluster‐type DFT calculations. Calculations of NMR parameters were performed on some of these models, and discussed in light of the experimental data.     

N‐heterocyclic carbene complexes of Rh(I) and electronic effects on catalysts for 1,2‐addition of phenylboronic acid to aldehydes

1,3‐Diarylsubstituted imidazolinium salts, (NHC‐H)Cl, 3, containing hydrogen or alkyl groups at the 4,5‐positions of the imidazolidine ring, served as precursors to rhodium(I) complexes [RhCl(NHC)COD], 4, which were converted into cis‐[RhCl(NHC)(CO)₂] complexes, 5. All compounds prepared were characterized by elemental analyses, ¹H NMR and ¹³C NMR. The relative σ‐donor/π‐acceptor strength of the NHC ligands was determined by means of IR spectroscopy of 5. The ability of NHCs in 4 to enchance activity was explored in the 1,2‐addition of phenylboronic acid to aldehydes. A good correlation was observed between catalytic activity and the electron‐donating power of the NHC ligands. Copyright © 2010 John Wiley & Sons, Ltd.     

Generalization of the Copper to Late‐Transition‐Metal Transmetallation to Carbenes beyond N‐Heterocyclic Carbenes

Carbene transition‐metal complexes have become a prevalent family of catalysts enabling numerous organic transformations. Their facile synthetic access is a matter of great importance. To this end, the Cu^I‐NHC transfer methodology has emerged as a powerful alternative presenting attractive advantages over other methods. Herein, we report the remarkable ability of copper to transfer not only NHCs but also other types of carbenes such as abnormal NHCs (aNHCs), cyclic (alkyl)(amino)carbenes (CAACs), and mesoionic carbenes (MICs) to various transition metal precursors.     

Recent Advances in the Chemistry of N‐Heterocyclic‐Carbene‐Functionalized Metal‐Nanoparticles and Their Applications

Metal‐nanoparticles (M‐NPs) have been widely applied in catalysis, imaging, sensing and medicine. One particularly active area of this research is the modification of the surface of the nanoparticles to prevent aggregation through the coordination of ligands. N‐Heterocyclic carbenes (NHCs) have emerged as suitable ligands for this purpose due to their affinity to the metals and their strongly electron donating nature. A number of rationally designed NHC‐modified M‐NPs have been developed using strategies based on metal complex decomposition and ligand exchange. Herein, NHC‐stabilized M‐NPs based on a range of transition metals, especially the recent advances, were summarized.     

A Benchtop Method for Appending Protic Functional Groups to N‐Heterocyclic Carbene Protected Gold Nanoparticles

The remarkable resilience of N‐heterocyclic carbene (NHC) gold bonds has quickly made NHCs the ligand of choice when functionalizing gold surfaces. Despite rapid progress using deposition from free or CO₂‐protected NHCs, synthetic challenges hinder the functionalization of NHC surfaces with protic functional groups, such as alcohols and amines, particularly on larger nanoparticles. Here, we synthesize NHC‐functionalized gold surfaces from gold(I) NHC complexes and aqueous nanoparticles without the need for additional reagents, enabling otherwise difficult functional groups to be appended to the carbene. The resilience of the NHC?Au bond allows for multi‐step post‐synthetic modification. Beginning with the nitro‐NHC, we form an amine‐NHC terminated surface, which further undergoes amide coupling with carboxylic acids. The simplicity of this approach, its compatibility with aqueous nanoparticle solutions, and its ability to yield protic functionality, greatly expands the potential of NHC‐functionalized noble metal surfaces.