雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

Al2O3忆阻器中氧空位对阻值转换性能的影响研究

忆阻器能够在外加电压下实现高阻态与低阻态的转换,在存储器件及仿神经网络计算等方面有着重要的应用。本文通过在Si衬底上制备得到Pt-Al2O3-Pt的金属-绝缘层-金属结构的忆阻器器件,研究了氧空位对阻值转换性能的影响。利用原子层沉积技术工艺控制生长不同氧空位浓度的Al2O3薄膜,测量并比较其Ⅰ—Ⅴ循环曲线,发现仅有在氧空位浓度较高情况下忆阻器才能够实现在高阻态和低阻态之间的转换。本文实验结果表明氧空位对于实现阻值转换性能有着重要的影响,对生长制备忆阻器器件有着重要意义。     

直接碳燃料电池燃料的研究进展

直接碳燃料电池(DCFC)是一种清洁高效利用碳资源发电的装置。其因能量转换率高,对环境污染小,燃料选择范围广等优点获得了越来越多的关注。DCFC的性能与使用的燃料密切相关,为了探究燃料对DCFC的影响,本文分别阐述了石墨、炭黑、中密度纤维板、生物质、煤、活性炭的特性及改性方法,分析讨论了燃料表面含氧官能团以及燃料中的金属催化剂对阳极电化学反应的促进作用,发现燃料表面化学性质要比比表面积更加重要。同时,本文也提出了对生物质这一优良的可再生资源的期待,为未来DCFC燃料的发展提供参考。     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

Mg,N掺杂β-Ga2O3光电性质的第一性原理计算

通过基于密度泛函理论的第一性原理计算,研究了Mg单掺杂、N单掺杂和不同浓度的Mg-N共掺杂β-Ga₂O₃的结构性质、电子性质和光学性质,以期获得性能比较优异的p型β-Ga₂O₃材料。建立了五种模型:Mg单掺杂、N单掺杂、1个Mg-N共掺杂、2个Mg-N共掺杂和3个Mg-N共掺杂β-Ga₂O₃。经过计算,3个Mg-N共掺杂β-Ga₂O₃体系的结构最稳定。此外,在5种模型中,3个Mg-N共掺杂β-Ga₂O₃体系的禁带宽度是最小的,并且N 2p和Mg 3s贡献的占据态抑制了氧空位的形成,从而增加了空穴浓度。因此,3个Mg-N共掺杂β-Ga₂O₃体系表现出优异的p型性质。3个Mg-N共掺杂体系的吸收峰出现明显红移,在太阳盲区的光吸收系数较大,这归因于导带Ga 4s、Ga 4p、Mg 3s向价带O 2p、N 2p的带间电子跃迁。本工作将为p型β-Ga₂O₃日盲光电材料的研究和应用提供理论指导。     

g-C3N4-W18O49复合光催化剂的制备及其光催化机理研究

通过简单的溶剂热法成功制备出了g-C3N4-W18O49复合光催化剂,采用XRD、SEM、TEM以及PL对所得催化剂的物相结构及形貌和光学性能进行了表征,通过降解甲基橙和光解水产氢实验研究所得催化剂的催化性能及其催化机理.由实验可知,W18O49的含量为50;时所得g-C3N4-W18O49复合光催化剂的降解性能最好,其降解率比纯g-C3N4纳米片提高48;;为进一步研究复合光催化剂的电子-空穴传输机理,我们又进行了光解水制氢实验.结果表明:单一的W18O49无产氢活性,它的复合明显降低了g-C3N4的产氢速率,说明复合结构中光生电子是从g-C3N4传递到了W18O49,表现出明显的Ⅱ型异质结复合特征,而不是部分文献所提出的Z型方式.     

复合电极La-Ni-B的制备及电催化偏硼酸钠的性能

为进一步提高对偏硼酸钠电催化还原的效率,采用化学镀的方法,以铜片为基体,PdCl2乙醇胶体溶液为活化剂,乙醇为化学镀溶剂,制备了稀土复合电极La-Ni-B.并采用XRD、SEM、EDS方法对催化剂进行表征分析,结果表明稀土合金以纳米颗粒的形式附着在基体表面,所得合金膜是非晶态的.通过循环伏安法研究了复合电极La-Ni-B用于电解偏硼酸钠制备硼氢化钠的可行性.以硼氢化钠实际生产量为指标,探讨了直流、脉冲两种不同供电方式、脉冲电流频率、电解时间对电解行为的影响.结果表明稀土镧对电解偏硼酸钠有催化作用,以20 mL镀液制备的复合电极,在脉冲频率阳极时间T1=1 s,阴极时间T2=1 s时,最佳电解时间为4h.复合电极在重复使用3次的情况下,硼氢化钠产量降低15;,催化剂的重复使用性能良好.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

高压辅助法制备红外非线性AgGaGe5Se12、AgGaGeS4晶体

AgGaGe5 Se12、AgGaGeS4非线性晶体在中远红外激光具有良好的应用前景.合成高纯多晶是制备可器件化单晶元件的关键.但S、Se易挥发、高温下饱和蒸气压高,易导致石英坩埚的爆炸,组分偏离化学计量比.为此,本文采用一种新型的高压辅助法合成出大尺寸高纯的多晶原料,解决了石英坩埚爆炸和组份偏离问题,并在此基础上进行了单晶的生长过程.多晶X射线粉末衍射测试结果与模拟图谱或者标准PDF卡片一致;X射线荧光光谱分析得到各元素百分含量非常接近化学计量比,AgGaGe5 Se12中Ag、Ga、Ge、Se各占7.86;、5.08;、23.80;、63.26;,AgGaGeS4中Ag、Ga、Ge、S各占28.22;、18.24;、19.52;、34.02;;单晶透过率测试得到AgGaGe5 Se12、AgGaGeS4透过率分别为60;、70;,证明此方法制备的AgGaGe5 Se12、AgGaGeS4晶体性能优良,展现了该方法在多晶合成的应用潜力.