铜镍和铜钴合金电极在碱性介质中的光电化学

用动电位伏安法对含镍量10％、30％和50％的铜镍合金以及含钴量5.1％、9.7％、15 ％、25％和40％的铜钴合金电极在硼砂-硼酸缓冲溶液（pH 8.5）中的光电化学行为进行了 研究.铜镍合金和铜钴合金均显示p-型光响应,铜镍合金的光响应来自Cu2O,铜钴合金的光 响应来自Cu2O和氧化钴.含镍量10％和30％的铜镍合金电极以及含钴量5.1％铜钴合金电极的 最大光电流iph,max均大于纯铜电极,含钴量15％、25％和40％的铜钴合金电极以及含镍量 50％的铜镍合金电极由于电极表面相当一部分面积分别被氧化钴和氧化镍所占有,iph,max 小于纯铜电极.铜镍合金电极的φv值（电位负向扫描过程中电极表面完全还原为Cu时的电位 ）负于纯铜电极,而铜钴合金电极的φv值与纯铜电极大致相等, NiO的存在致使铜镍合金 表面Cu2O膜具有更大的稳定性.从光电化学角度通过φv和iph,max反映铜合金的耐腐蚀性能 与交流阻抗法测得的结果相符.     

低碳醇合成Raney Cu－Co催化剂的表征

本文采用ＸＲＤ、ＸＰＳ、及Ｈ_２—ＴＰＤ技术对不同Ｃｕ／Ｃｏ比的几个ＲａｎｅｙＣｕ－Ｃｏ催化剂进行了表征．并与反应醇选择性进行了关联．结果表明：ＲａｎｅｙＣｕ－Ｃｏ催化剂均由不同Ｃｕ／Ｃｏ比的两个Ｃｕ－Ｃｏ固溶体相组成，还原（Ｈ_２，５６３Ｋ，２ｈ）前，表面除有Ｃｕ￣０和Ｃｏ￣０外，尚有少量Ｃｕ￣（＋１）和显著量的Ｃｏ￣（＋２）存在，还原后，Ｃｕ￣（＋１）几乎消失，Ｃｏ￣（＋２）仍有一定量存在，在反应温度下（５６３Ｋ），ＣＯ和ＣＯ_２均能使表面Ｃｏ￣０部分氧化，且ＣＯ_２氧化能力大于ＣＯ，而合成气（Ｈ_２／ＣＯ＝２）表现为还原的性质。三种气氛对Ｃｕ￣０无明显影响。催化剂表面Ｃｕ／Ｃｏ比高于体相Ｃｕ／Ｃｏ比，表面Ｃｕ富集显著．ＲａｎｅｙＣｕ－Ｃｏ催化剂表面有四种吸氢中心：Ｃｕ（弱吸氢中心），高配位Ｃｏ（弱吸氢中心），低配位Ｃｏ（活化吸氢中心），及强吸氢中心；对不同催化剂，表面低配位Ｃｏ中心的比例与醇选择性有一致的变化规律。基于上述结果，就ＣＯ播入中心进行了讨论。     

Copper-cobalt Bimetallic Oxides-doped Alumina Hollow Spheres:a Highly Efficient Catalyst for Epoxidation of Styrene

Copper-cobalt bimetallic oxides-doped alumina hollow spheres(CuCo/AHS)were labricatcd through the sacrificial carbonaceous template strategy.The dependence of the physicochemical properties and morphologies of CuCo/AHS on the composition of copper and cobalt in CuxCoy/AHS(x/y=9/1,7/3,5/5,and 3/7)was characterized bv means of X-ray powder diffraction,nitrogen physisorption,atomic adsorption spectroscopy,scanning electron microscopy,transmission electron microscopy and X-ray photoelectron spectroscopy.Among these catalysts, Cu7-Co3/AHS catalyst exhibited perfect hollow sphere structure,thin wall,and big pore size.The calcined catalysts were examined for the epoxidation of styrene with tert-butyl hydroperoxide as oxidant.Compared with the monometallic counterparts(Cu/AHS and Co/AHS)and other CuxCoy/AHS catalysts,Cu7Co3/AHS catalyst showed higher performance,yielding a styrene conversion of 64.6% with 93.0% selectivity toward styrene oxide.In addition,the strong interaction of Cu^2+or Co^2+ with AHS ensured good stability after four consecutive reactions.     

CATALYTIC HYDROGENATION OF CARBON DIOXIDE TO C2+ ALCOHOLS OVER COPPER-COBALT SPINELS (I)

Several Cu-Co spinels were prepared for higher alcohol synthesis from CO2 and H2. They exhibited a promising potential for the reaction with a high selectivity to C2+ alcohols, but the selectivity decreased when KOH was introduced. XRD characterization showed that the addition of KOH destroyed the metallic Cu and Co cluster. Some results were discussed.     

低碳醇合成Raney Cu－Co催化剂的研究Ⅱ．Cu－Co－Al合金及Raney Cu－Co催化剂的XRD表征

本文对Ｃｕ／Ｃｏ比不同的五个Ｃｕ－Ｃｏ－Ａｌ合金样及其碱抽提产物──ＲａｎｅｙＣｕ－Ｃｏ催化剂的体相结构进行了ＸＲＤ表征。结果表明：Ｃｕ－Ｃｏ－Ａｌ合金由ＣｕＡｌ、ＣｕＡｌ＿２及Ａｌ＿（１３）Ｃｏ＿４三种物相构成。随Ｃｕ／Ｃｏ原子比（０．１７～２３．１）增高，Ａｌ＿（１３）Ｃｏ＿４及ＣｕＡｌ物相逐渐减少，直至消失，ＣｕＡｌ＿２物相产生且逐渐增多。ＲａｎｅｙＣｕ－Ｃｏ催化剂由两种Ｃｕ－Ｃｏ固溶体组成，一种富铜，另一种富钴。Ｃｕ－Ｃｏ固溶体的形成发生于碱抽提或还原过程，含钴物相的存在有利于ＣｕＡ１物相的碱抽提。     

Cu-Co bi-metal catalyst prepared by perovskite CuO/LaCoO3 used for higher alcohol synthesis from syngas

Cu-Co bi-metal catalysts derived from CuO/LaCoO3 perovskite structure were prepared by one-step citrate complexing method, and the structure evolution reaction from CuO/LaCoO3 to Cu-Co2C/La202CO3 under 1-12 pretreatment was investigated by techniques of XRD, TPR and TEM. The results suggest that a much higher dispersion of copper significantly enhanced the reduction of cobalt, and a stronger interaction between copper and cobalt ions in LaCoO3 particles led to the formation of bi-metallic Cu-Co particles in the reduced catalysts and the enrichment of Co on the surface of bimetallic particles. The prepared catalysts were highly active and selective for the alcohol synthesis from syngas due to the presence of copper-modified C02C species.     

Cu-Co bi-metal catalyst prepared by perovskite CuO/LaCoO3 used for higher alcohol synthesis from syngas

Cu-Co bi-metal catalysts derived from CuO/LaCoO₃ perovskite structure were prepared by one-step citrate complexing method, and the structure evolution reaction from CuO/LaCoO₃ to Cu-Co₂C/La₂O₂CO₃ under H₂ pretreatment was investigated by techniques of XRD, TPR and TEM. The results suggest that a much higher dispersion of copper significantly enhanced the reduction of cobalt, and a stronger interaction between copper and cobalt ions in LaCoO₃ particles led to the formation of bi-metallic Cu-Co particles in the reduced catalysts and the enrichment of Co on the surface of bimetallic particles. The prepared catalysts were highly active and selective for the alcohol synthesis from syngas due to the presence of copper-modified Co₂C species.     

N_2O在钾改性Cu-Co尖晶石型复合氧化物上的催化分解(英文)

制备了几个不同组成的Cu-Co尖晶石型复合氧化物,用于N2O分解反应,在活性较高的Cu0.8Co0.2Co2O4表面浸渍碱金属盐溶液,制备改性催化剂,考察了碱金属助剂类型、钾前驱物和钾负载量等对改性催化剂活性的影响。用BET、XRD、SEM、XPS等方法表征了催化剂结构。结果表明,几种碱金属碳酸盐改性Cu0.8Co0.2Co2O4的催化活性发生了显著变化,其中,K改性催化剂的活性有明显提高,而Cs的表面改性反而降低了催化剂活性;钾前驱物对K/Cu-Co的催化活性也有较大影响,其中,加入碳酸钾明显提高了催化剂的活性,而加入硝酸钾和醋酸钾反而降低了催化剂活性;有氧无水、有氧有水气氛中,400!C下N2O在碳酸钾改性催化剂0.05K/Cu0.8Co0.2Co2O4上的转化率分别达到了100%和87.6%;该催化剂在400!C下的恒温反应活性和稳定性均高于未改性催化剂。     

Cu-Co尖晶石催化CO_2加氢合成低碳醇(Ⅰ)(英文)

制备了几种CU－CO尖晶石,并用于催化CO2加氢合成低碳醇反应。结果表明,Cu－Co尖晶石是一种极具潜力的催化剂前驱体,具有出色的C2＋醇合成能力。但是,当在该催化剂中加入KOH时,这种能力下降。XRD表征表明,KOH的加入破坏了CU－Co合金的生成。一些结果被讨论。     

不同方法制备的Cu－Co低碳醇合成催化剂的比较研究Ⅰ．吸附态CO的红外光谱

本文并行考察了用溶剂化金属原子分散（ＳＭＡＤ）、浸渍、共沉淀三种方法制备的Ｃｕ－Ｃｏ催化剂的一氧化碳加氢反应（５６３Ｋ，６ＭＰａ，Ｈ２／ＣＯ＝２）性能及吸附态ＣＯ的红外光谱．结果表明：（１）三种催化剂上反应产物均为Ｃ１－Ｃ５正构醇及正构烃，总醇的选择性依下列次序递增：ＳＭＡＤ＜浸渍＜共沉淀；（２）表面低配位钻中心上多重吸附态ＣＯ的红外吸收峰的面积分数，对不同催化剂的变化规律，与醇选择性的变化一致；（３）高温还原和焙烧均使醇选择性下降，同时使表面低配位Ｃｏ０中心减少．据此讨论了ＣＯ插入中心，活性结构及制备方法的影响．