Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2

We established a gas-phase, elementary reaction model for chemical vapor deposition of silicon carbide from methyltrichlorosilane (MTS) and H₂, based on the model developed at Iowa State University (ISU). The ISU model did not reproduce our experimental results, decomposition behavior of MTS in the gas phase in an environment with H₂. Therefore, we made several modifications to the ISU model. Of the reactions included in existing models, 236 were lacking in the ISU model, and thus were added to the model. In addition, we modified the rate constants of the unimolecular reactions and the recombination reactions, which were treated as a high-pressure limit in the ISU model, into pressure-dependent rate expressions based on the previous reports (to yield the ISU+ model), for example, H₂(+M) → H + H(+M), but decomposition behavior remained poorly reproducible. To incorporate the pressure dependencies of unimolecular decomposition rate constants, and to increase the accuracies of these constants, we recalculated the rate constants of five unimolecular decomposition reactions of MTS using the Rice-Ramsperger-Kassel-Marcus method at the CBS-QB3 level. These chemistries were added to the ISU+ model to yield the UT2014 model. The UT2014 model reproduced overall MTS decomposition. From the results of our model, we confirmed that MTS mainly decomposes into CH₃ and SiCl₃ at the temperature around 1000°C as reported in the several studies.     

Indeno[1,2,3,4-pqra]Perylene: A Medium-Sized Aromatic Hydrocarbon Exhibiting Full-Range Visible-Light Absorption

We report the synthesis and properties of indeno[1,2,3,4-pqra]perylene, which was prepared by the fusion of one anthracene unit with one naphthalene unit via three carbon-carbon bonds. The synthetic route through two-fold C−H arylation enabled not only the synthesis of unsubstituted indenoperylene, but also rapid access to its arylated derivatives on the gram scale. Indenoperylene is a medium-sized aromatic hydrocarbon with the composition C₂₄H₁₂ that is isomeric to coronene. Nevertheless, its absorption covers the entire visible region owing to its small HOMO-LUMO gap. Furthermore, indenoperylene exhibits high stability despite the absence of peripheral substituents. We propose that the unique electronic structure of indenoperylene originates from the coexistence of an electron-withdrawing subunit (benzoaceanthrylene) and an electron-donating subunit (perylene). The electronic properties of indenoperylene were modulated via post-functionalization through regioselective bromination. The current research demonstrates that indenoperylene is a promising candidate as a main skeleton for near-infrared-responsive and redox-active materials.     

Cu2O/CuO Electrocatalyst for Electrochemical Reduction of Carbon Dioxide to Methanol

Herein, we report the controlled and direct fabrication of Cu₂O/CuO thin film on the conductive nickel foam using electrodeposition route for the electrochemical reduction of carbon dioxide (CO₂) to methanol. The electrocatalytic reduction was performed in CO₂ saturated aqueous solution consisting of KHCO₃, pyridine and HCl at room temperature. CO₂ reduction was carried out at a constant potential of −1.3 V for 120 min to study the electrochemical performance of the prepared electrocatalysts. Cu₂O/CuO shows better electrocatalytic activity with highest current density of 46 mA/cm². The prepared catalyst can be an efficient and selective electrode for the production of methanol.     

Formation of molten metal films during metal-on-metal slip under extreme interfacial conditions

The present paper describes results of plate-impact pressure-shear friction experiments conducted to study time-resolved growth of molten metal films during dry metal-on-metal slip under extreme interfacial conditions. By employing tribo-pairs comprising hard tool-steel against relatively low melt-point metals such as 7075-T6 aluminum alloys, interfacial friction stress ranging from 100 to and slip speeds of approximately have been generated. These relatively high levels of friction stress combined with high slip-speeds generate conditions conducive for interfacial temperatures to approach the melting point of the lower melt point metal (Al alloy) comprising the tribo-pair.A Lagrangian finite element code is developed to understand the evolution of the thermo-mechanical fields and their relationship to the observed slip response. The code accounts for dynamic effects, heat conduction, contact with friction, and full thermo-mechanical coupling. At temperatures below the melting point the material is described as an isotropic thermally softening elastic-viscoplastic solid. For material elements with temperatures in excess of the melt point a purely Newtonian fluid constitutive model is employed.The results of the hybrid experimental-computational study provides new insights into the thermoelastic-plastic interactions during high speed metal-on-metal slip under extreme interfacial conditions. During the early part of frictional slip the coefficient of kinetic friction is observed to decrease with increasing slip velocity. During the later part transition in interfacial slip occurs from dry metal-on-metal sliding to the formation of molten Al films at the tribo-pair interface. Under these conditions the interfacial resistance approaches the shear strength of the molten aluminum alloy under normal pressures of approximately 1- and shear strain rates of . The results of the study indicate that under these extreme conditions molten aluminum films maintain a shearing resistance as high as .Scanning electron microscopy of the slip surfaces reveal molten aluminum to be smeared on the tribo-pair interface. Knoop hardness measurements in 7075-T6 Al alloy at various depths from the slip interface indicate that the hardness increases approximately linearly with depth and reaches a plateau at approximately from the surface.     

Reaction mechanism and rate constants of the CH+CH4 reaction: a theoretical study

Ab initio and density functional calculations have been performed to elucidate the mechanism of CH radical insertion into methane. The results show that the reaction can be viewed to occur via two stages. On the first stage, the CH radical approaches methane without large structural changes to acquire proper positioning for the subsequent stage, where H-migration occurs from CH₄ to CH, along with a C–C bond formation. Where the first stage ends and the second begins, a tight transition state was located using the B3LYP/6-311G(d,p) and MP4(SDQ)/6-311++G(d,p) methods. Using a rigid rotor – harmonic oscillator approach within transition state theory, we show that at the MP5/6-311++G(d,p)//MP4(SDQ)/6-311++G(d,p) level the calculated rate constants are in a reasonably good agreement with experiment in a broad temperature range of 145–581 K. Even at low temperatures, the insertion reaction bottleneck is found about the location of the tight transition state, rather than at long separations between the CH and CH₄ reactants. In addition, high level CCSD(T)-F12/CBS calculations of the remainder of the C₂H₅ potential energy surface predict the CH+CH₄ reaction to proceed via the initial insertion step to the ethyl radical which then can emit a hydrogen atom to form highly exothermic C₂H₄+H products.     

13CH4分子v3振动带空气和氮气加宽系数温度依赖性研究

采用中红外波段连续可调谐二极管激光器和自行研制的低温吸收池, 测量了温度为296 K, 252 K, 213 K, 173 K时, 3.38 μm附近¹³CH₄分子的四条跃迁谱线的氮气和空气加宽光谱; 首次通过实验获得空气和氮气对¹³CH₄分子的碰撞加宽系数, 以及谱线加宽系数的温度依赖系数. 实验过程中, 利用Voigt线型对所测量的光谱进行拟合. 实验结果表明, 氮气和空气对¹³CH₄分子的碰撞诱导加宽系数随温度的降低而增大; 相同温度下, 氮气对¹³CH₄分子的碰撞加宽系数普遍大于空气加宽系数. 实验数据为地球和外星体大气遥感探测提供了依据.     

Synthesis,spatial structure and spectral properties of pyrylo‐4 (thio) squaraines variously substituted in cyclobutene moiety

Synthetic routes have been developed to a number of (thio) squaraine dyes containing the residues of CH‐acids at the central cyclobutene ring. The electronic and spatial structure as well as the chemical conversions and optical behaviour of the compounds obtained have been studied both theoretically and by X‐ray diffraction analysis, ¹H NMR and electronic spectroscopy. As shown, the electronic nature and sterical characteristics of the central ring substituents give rise to some general conformational features and crystal packing regularities and also govern the spectral position of the first π–π^* absorption band. The structure–property relationships established in the study provide guidance for the purposeful design of deeply coloured (thio) squaraines. Copyright © 2015 John Wiley & Sons, Ltd.     

新型热作模具钢CH95的高温力学和抗磨性能研究

对比研究了CH95钢与H11钢的高温力学及抗磨性能,分析了2种模具钢的组成和微结构对其高温力学性能和抗磨性能的影响,采用透射电子显微镜观察分析了CH95钢试样中碳化物的形貌．结果表明：CH95钢与H11钢相比具有优异的高温力学性能;其优异的高温力学性能和抗磨性能归因于其特定的微观结构;CH95钢中细小且呈弥散分布的MC、M2C强化相的含量较高,使得其在高温下仍可保持优良的力学性能和抗磨性能;稀土可加速CH95钢表面致密氧化物层的形成,提高其强度、韧性、耐磨性和抗剥离能力;而经离子氮化处理后形成的细小且呈弥散分布的合金氮化物亦可起弥散强化作用,从而使得CH95钢在高温高载荷下的抗磨性能明显优于H11钢．     

甲烷-二氧化碳重整制合成气与现代分析技术应用于探究性化工专业实验的设计与探索

以甲烷-二氧化碳重整制合成气为实例，设计探究性实验，将合成气的制备和现代分析技术应用于化工专业实验的教学实践中以提高学生的创新和实践能力。实验包括催化剂的制备，催化剂的性能评价和催化剂的表征等3大部分。采用工业最常用的浸渍法制备含有不同助剂的Ni/X/γ-Al2O3（X为Co，Fe，MgO，CeO2）催化剂，以甲烷-二氧化碳重整反应评价其催化性能，并采用XRD、H2-TPR、BET和TG对催化剂的微观结构进行表征。结合催化剂的性能评价结果和表征结果，探讨不同助剂对镍基催化剂性能的改善效果及机制。通过开设该实验，可以让学生了解化工学科的前沿知识以及现代分析技术的基本原理和用途，掌握专业的实验操作、数据处理和谱图绘制方法，提高学生的专业素养和综合能力。     

Amine-Directed Palladium-Catalyzed C−H Halogenation of Phenylalanine Derivatives

An efficient primary-amine-directed, palladium-catalyzed C−H halogenation (X=I, Br, Cl) of phenylalanine derivatives is reported on a range of quaternary amino acid (AA) derivatives thanks to suitable conditions employing trifluoroacetic acid as additive. The extension of this original native functionality-directed ortho-selective halogenation was even demonstrated with the more challenging native phenylalanine as tertiary AA.