Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys

The effect of Re addition on the microstructure and hardening behaviour of the dual two-phase Ni₃Al (L1₂) and Ni₃V (D0₂₂) intermetallic alloy was investigated by scanning electron microscopy, transmission electron microscopy and Vickers hardness test. The two-phase eutectoid microstructure accompanying the Re-rich precipitates were observed in the channel region of the alloys in which Re substituted for Ni but not in those in which Re substituted for Al and V. The concomitant addition of Nb (or Ta) with Re more stabilized the two-phase eutectoid microstructure and consequently more induced the fine precipitates in the channel region. The annealing at temperatures below the eutectoid temperature was necessary to induce the fine precipitates in the channel region and thereby result in the precipitation hardening. The fine precipitation in the channel region and related hardening was attributed to the alloying feature so that Re is soluble in the A1 (fcc) phase at high temperatures and becomes less soluble in the two intermetallic phases decomposed from the A1 phase at low temperatures.     

Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2

We established a gas-phase, elementary reaction model for chemical vapor deposition of silicon carbide from methyltrichlorosilane (MTS) and H₂, based on the model developed at Iowa State University (ISU). The ISU model did not reproduce our experimental results, decomposition behavior of MTS in the gas phase in an environment with H₂. Therefore, we made several modifications to the ISU model. Of the reactions included in existing models, 236 were lacking in the ISU model, and thus were added to the model. In addition, we modified the rate constants of the unimolecular reactions and the recombination reactions, which were treated as a high-pressure limit in the ISU model, into pressure-dependent rate expressions based on the previous reports (to yield the ISU+ model), for example, H₂(+M) → H + H(+M), but decomposition behavior remained poorly reproducible. To incorporate the pressure dependencies of unimolecular decomposition rate constants, and to increase the accuracies of these constants, we recalculated the rate constants of five unimolecular decomposition reactions of MTS using the Rice-Ramsperger-Kassel-Marcus method at the CBS-QB3 level. These chemistries were added to the ISU+ model to yield the UT2014 model. The UT2014 model reproduced overall MTS decomposition. From the results of our model, we confirmed that MTS mainly decomposes into CH₃ and SiCl₃ at the temperature around 1000°C as reported in the several studies.     

Efficient synthesis and properties of soluble aliphatic oligo(spiroorthocarbonate)s from pentaerythritol derivatives

A series of soluble oligo(spiroorthocarbonate)s (OSOCs) were synthesized by polycondensation of tetraethylorthocarbonate with pentaerythritol derivatives. The pentaerythritol derivatives used herein were synthesized from pentaerythritol by attaching substituents on it to improve the solubility of themselves and the resulting OSOCs. The structures of the OSOCs were confirmed by NMR spectroscopy and MALDI‐TOF mass analysis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 792–798     

Significant Effect of the Flexibility of Bridging Alkyl Chains on the Proximity of Stacked Porphyrin and Phthalocyanine Conjugated with a Fourfold Rotaxane Linkage

Spatial distance is an important factor in controlling the functional interactions between molecular units in a conjugate; therefore, the bridging unit has been closely examined. Here, we examined the effect of the flexibility of bridging alkyl chains on the proximity of stacked porphyrin and phthalocyanine conjugated with a fourfold rotaxane linkage. We found that closely stacking two π systems requires bridging alkyl chains above a certain length, and the shorter bridges hinder stacking because of their lower flexibility. The stacking distance between porphyrin and phthalocyanine in the conjugate with decyl (C₁₀) chains was estimated to be 4.03 Å and showed a unique physical character arising from short-distance interactions. The longer alkyl chains minimized steric restriction inside the fourfold rotaxane and allowed efficient communication between the porphyrin and phthalocyanine units. This is due to the flexibility of the side chains.     

Anionic ring-opening polymerization behavior of trans-cyclohexene carbonate using metal tert-butoxides: Construction of living anionic ring-opening polymerization by lithium tert-butoxide

Anionic ring-opening polymerization (ROP) behavior of trans-cyclohexene carbonate (CHC) using metal alkoxides as initiators was investigated. As a result, lithium tert-butoxide-initiated ROP of CHC with a high-monomer concentration (10 M) at low temperature (−15 to −10°C) proceeded to afford a poly(trans-cyclohexene carbonate) (PCHC) without undesired side reactions such as mainly backbiting. The suppression of side reactions enables the control of the molecular weight (M_n = 2400–6100) of PCHC with low molar-mass dispersity values (M_w/M_n = 1.16–1.22). Furthermore, by increasing the feed ratio of the monomer to the initiator, the molecular weight increases proportionally, indicating a controllable polymerization. The results of a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a kinetic study, and a chain extension experiment suggested a living nature of this ROP using lithium tert-butoxide.     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

Colorimetric detection of Cu2+ using of a mixture of ponceau 6R and a cationic polyelectrolyte in aqueous solution

Journal of Inclusion Phenomena and Macrocyclic Chemistry - A colorimetric chemosensor is reported for Cu2+ by a simple mixture of two commercially available reagents, ponceau 6R (P6R) and...