Shimalactone Biosynthesis Involves Spontaneous Double Bicyclo-Ring Formation with 8π-6π Electrocyclization

Shimalactones A and B are neuritogenic polyketides possessing characteristic oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene ring systems that are produced by the marine fungus Emericella variecolor GF10. We identified a candidate biosynthetic gene cluster and conducted heterologous expression analysis. Expression of ShmA polyketide synthase in Aspergillus oryzae resulted in the production of preshimalactone. Aspergillus oryzae and Saccharomyces cerevisiae transformants expressing ShmA and ShmB produced shimalactones A and B, thus suggesting that the double bicyclo-ring formation reactions proceed non-enzymatically from preshimalactone epoxide. DFT calculations strongly support the idea that oxabicyclo-ring formation and 8π-6π electrocyclization proceed spontaneously after opening of the preshimalactone epoxide ring through protonation. We confirmed the formation of preshimalactone epoxide in vitro, followed by its non-enzymatic conversion to shimalactones in the dark.     

Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2

We established a gas-phase, elementary reaction model for chemical vapor deposition of silicon carbide from methyltrichlorosilane (MTS) and H₂, based on the model developed at Iowa State University (ISU). The ISU model did not reproduce our experimental results, decomposition behavior of MTS in the gas phase in an environment with H₂. Therefore, we made several modifications to the ISU model. Of the reactions included in existing models, 236 were lacking in the ISU model, and thus were added to the model. In addition, we modified the rate constants of the unimolecular reactions and the recombination reactions, which were treated as a high-pressure limit in the ISU model, into pressure-dependent rate expressions based on the previous reports (to yield the ISU+ model), for example, H₂(+M) → H + H(+M), but decomposition behavior remained poorly reproducible. To incorporate the pressure dependencies of unimolecular decomposition rate constants, and to increase the accuracies of these constants, we recalculated the rate constants of five unimolecular decomposition reactions of MTS using the Rice-Ramsperger-Kassel-Marcus method at the CBS-QB3 level. These chemistries were added to the ISU+ model to yield the UT2014 model. The UT2014 model reproduced overall MTS decomposition. From the results of our model, we confirmed that MTS mainly decomposes into CH₃ and SiCl₃ at the temperature around 1000°C as reported in the several studies.     

Asymmetric Synthesis of Spiroketals with Aminothiourea Catalysts

Chiral spiroketal skeletons are found as core structures in a range of bioactive compounds. These natural compounds and their analogues have attracted much attention in the field of drug discovery. However, methods for their enantioselective construction are limited, and easily available optically active spiroketals are rare. We demonstrate a novel catalytic asymmetric synthesis of spiroketal compounds that proceeds through an intramolecular hemiacetalization/oxy‐Michael addition cascade mediated by a bifunctional aminothiourea catalyst. This results in spiroketal structures through the relay formation of contiguous oxacycles, in which multipoint recognition by the catalyst through hydrogen bonding imparts high enantioselectivity. This method offers facile access to spiroketal frameworks bearing an alkyl group at the 2‐position, which are prevalent in insect pheromones. Optically active (2S,5S)‐chalcogran, a pheromone of the six‐spined spruce bark beetle, and an azide derivative could be readily synthesized from the bicyclic reaction product.     

High-speed monitoring of the crystallinity change in poly(lactic acid) during photodegradation by using a newly developed wide area NIR imaging system (Compovision)

We aimed to achieve wide area rapid monitoring of the crystallinity change in poly(lactic acid) (PLA) during photodegradation caused by ultraviolet (UV) light by using a newly developed near-infrared (NIR) camera (Compovison). Several kinds of PLA samples with different crystallinities and their blends with poly[(3)-(R)-hydroxybutyrate] were prepared. Their two-dimensional NIR spectra in the 1,000–2,350-nm region were measured by Compovision at a 5-min interval during photolysis. An intensity decrease of the band in the 1,900-1,925-nm region due to the second overtone of the C = O stretching vibration of PLA was observed during photolysis. This suggests that an anhydride carbonyl is produced during photolysis. The NIR image of the crystallinity change monitored by the band at 1,917 nm in the standard normal variate spectra clearly shows the inhomogeneity of crystal evolution. A logarithmic increase was observed for all identified areas in the PLA film; however, the time to reach the maximum crystallinity was slightly different according to the initial crystallinity of the sample. It is likely that the initial crystallinity of the sample influences the degradation speed more than the degradation amount. These imaging results have provided fundamental chemical insights into the photolytic process for PLA, and at the same time they have demonstrated that the two-dimensional spectral data obtained by Compovision are useful for process monitoring of polymers.     

Synthetic Studies on Sialoglycoconjugates 95: Total Synthesis of Sulfated Glucuronyl Lactosaminyl Paraglobosides

ABSTRACT

3-O-Sulfo glucuronyl neolactohexanosyl ceramide derivatives (heptasaccharides) have been synthesized. Condensation of 2-(trimethylsilyl)ethyl 2,4,6-tri-O-benzyl-β-D-galactopyranoside (2) with 4-O-acetyl-3,6-di-O-benzyl-2-deoxy-2-phthalimido-β-D-glucopyranosyl trichloroacetimidate (1) gave the desired β-glycoside 3, which was converted into 2-(trimethylsilyl)ethyl O-(2-acetamido-3,6-di-O-benzyl-2-deoxy-β-D-glucopyranosyl)-(1→3)-2,4,6-tri-O-benzyl-β-D-galactopyranoside (4) via removal of the O-acetyl and N-phthaloyl groups, followed by N-acetylation. Glycosylation of 4 with O-(methyl 4-O-acetyl-2-O-benzoyl-3-O-levulinoyl-β-D-glucopyranosyluronate)-(1→3)-2,4,6-tri-O-benzoyl-α-D-galactopyranosyl trichloroacetimidate (5) using trimethylsilyl trifluoromethanesulfonate gave the target tetrasaccharide 6, which was transformed via removal of the benzyl group, O-benzoylation, removal of the 2-(trimethylsilyl)ethyl group and imidate formation into the tetrasaccharide donor 9. Glycosylation of 2-(trimethylsilyl)ethyl O-(2-acetamido-3,6-di-O-benzyl-2-deoxy-β-D-glucopyranosyl)-(1→3)-O-(2,4,6-tri-O-benzyl-β-D-galactopyranosyl)-(1→4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (10) with the imidate donor 9 using trimethylsilyl trifluoromethanesulfonate gave the desired heptasaccharide 11, which was transformed into the heptasaccharide imidate donor 14. Glycosylation of (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octadecene-1,3-diol (15) with 14 gave β-glycoside 16, which was transformed into the four target compounds, via reduction of the azido group, coupling with octadecanoic acid or tetracosanoic acid, selective removal of the levulinoyl group, O-sulfation, hydrolysis of the methyl ester group and O-deacylation.     

Division polynomials and canonical local heights on hyperelliptic Jacobians

We generalize the division polynomials of elliptic curves to hyperelliptic Jacobians over the complex numbers. We construct them by using the hyperelliptic sigma function. Using the division polynomial, we describe a condition that a point on the Jacobian is a torsion point. We prove several properties of the division polynomials such as determinantal expressions and recurrence formulas. We also study relations among the sigma function, the division polynomials, and the canonical local height functions.     

Chiral Phosphoric‐Acid‐Catalyzed Transfer Hydrogenation of Ethyl Ketimine Derivatives by Using Benzothiazoline

Chiral phosphoric acid catalyzed transfer hydrogenation of ketimines derived from propiophenone derivatives and reductive amination of alkyl ethyl ketone derivatives were extensively examined in the presence of two representative hydrogen donors. The excellent enantioselective transfer hydrogenation was achieved by use of benzothiazoline as a hydrogen donor. The theoretical studies elucidated that the unsymmetrical structure of benzothiazoline plays an important role in high enantioselective hydrogenation.     

Pressure-Induced Solidification of 1-Butyl-3-methylimidazolium Tetrafluoroborate

We have used Raman spectroscopy to investigate the high-pressure phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), a representative ionic liquid, at pressures up to ~7.5 GPa. We have also studied how increasing pressure leads to conformational changes in the [bmim]⁺ cation. We have found that liquid [bmim][BF₄] undergoes pressure-induced solidification (freezing) into a superpressed (metastable) state at 2.5 GPa; another structural change probably occurs at ~6 GPa. Remarkably, conformational changes in the [bmim]⁺ cation between trans and gauche conformers are concordant with the metastable structural changes of [bmim][BF₄]. As the pressure is increased from ambient, the fraction of gauche conformers increases, but the gauche fraction decreases above the solidification pressure (2.5 GPa), and slope of the gauche/trans ratio changes again above 6 GPa. We interpret these results in terms of the fragility of the ionic liquid.