气相色谱-质谱法检测白酒和黄酒中18种邻苯二甲酸酯类增塑剂

建立了白酒和黄酒中增塑剂的液液萃取法提取,气相色谱-质谱法检测技术,内标法定量。考察了基质效应,萃取方法等主要条件,并最终确定正己烷为提取溶剂的液液萃取技术,并且提取过程中加入NaCl和H2O。在优化的条件下,18种增塑剂均具有较好的线性相关性,线性相关系数均大于0.9978,白酒和黄酒的添加回收率、相对标准偏差分别为75.7%~97.5%、2.3%~6.7%和74.8%~96.0%、1.9%~7.1%;检出限均小于0.05 mg/kg。方法可为酒中增塑剂检测的标准方法的建立提供参考。     

增塑剂对PVA碱性聚合物电解质电化学性能的影响

通过溶解―铸膜法制备聚乙烯醇(PVA)-KOH-H2O碱性聚合物电解质膜。向聚合物中添加增塑剂丙三醇(GROL)和碳酸丙烯酯(PC)来提高离子电导率。X射线晶体衍射分析(XRD)结果表明,添加增塑剂未改变聚合物的物相结构,薄膜仍主要为不定形态。差示扫描热分析(DSC)结果显示,添加增塑剂后聚合物电解质膜的玻璃化转变温度降低,促进了电解质膜向不定形态转变。电解质膜室温离子电导率随增塑剂添加而增大,增塑剂超过一定量后离子电导率开始下降。PC对提高离子电导率的作用优于GROL。循环伏安测试结果显示,电解质膜的电化学稳定性窗口随增塑剂的添加而有所变窄,但仍显示了较好的电化学稳定性。     

气相色谱-串联质谱法测定白酒中16种增塑剂

采用气相色谱-串联质谱法测定白酒中16种增塑剂的含量。样品经30℃水浴真空旋转蒸发10min去除乙醇后,用正己烷萃取,漩涡振荡1min,取上层有机相用TR-5MS色谱柱分离,选择反应监测扫描(SRM)模式测定。16种增塑剂的质量浓度在5~1 000μg·L-1范围内与其峰面积呈线性关系,检出限(3S/N)在5~15μg·kg-1之间。在50,100,500μg·kg-1等3个浓度水平进行加标回收试验,回收率在70.5%~120%之间,相对标准偏差(n=6)小于15%。     

Lithium ion conduction and ion-polymer interaction in poly（vinyl pyrrolidone） based electrolytes blended with different plasticizers

Poly（ethylene oxide）, poly（vinyl pyrrolidone）（PEO/PVP）, lithium perchlorate salt（Li Cl O4） and different plasticizer based, gel polymer electrolytes were prepared by the solvent casting technique. XRD results show that the crystallinity decreases with the addition of different plasticizers. Consequently, there is an enhancement in the amorphousity of the samples responsible for the process of ion transport. FTIR spectroscopy is used to characterize the structure of the polymer and confirms the complexation of plasticizer with host polymer matrix. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. Among the various plasticizers, the ethylene carbonate（EC） based complex exhibits a maximum ionic conductivity value of the order of2.7279 10 4S cm 1. Thermal stability of the prepared electrolyte films shows that they can be used in batteries at elevated temperatures. PEO（72%）/PVP（8%）/Li Cl O4（8%）/EC（12%） has the maximum ionic conductivity value which is supported by the lowest optical band gap and lowest intensity in photoluminescence spectroscopy near 400–450 nm. Two and three dimensional topographic images of the sample having a maximum ionic conductivity show the presence of micropores.     

A Novel Plasticizer for the Preparation of Thermoplastic Starch

TPS was a biodegradable material based on starch. Starch was an inexpensive and natural renewable polysaccharide, which was widely investigated as the substitute of petroleum-derived plastics. Native starch commonly existed in granule structure with about…     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

增塑剂对1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷PVC膜钠离子电极性能的影响

以1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷(即ETH 227,Fluka No.71732)为中性载体的钠离子选择电极由于具有较强的抗钾离子干扰的能力,因而颇受注意。Guggi等首先用邻硝基苯辛醚和癸二酸二丁酯增塑,以合成的ETH227制成了K_((Na)~+,K~+)~(pot),<<10~(-2)的PVC膜钠离子电极.Jenny等以癸二酸二异辛酯为增塑剂,     

再生塑料食品袋有害健康

国家轻工业食品质量检测成都站人士提醒消费者和食品生产厂家，切莫用“垃圾塑料”食品袋包装食品，以免危害消费者健康。国家轻工业食品质量检测成都站人士指出，没作任何消毒处理的再生塑料已经过多次污染，会对食品造成再次污染，特别是油类食品，若用聚氯乙烯塑料袋(盒)包装，其有害物质会溶解到油脂中，对食品造成污染，从而影响