室温铁磁性Sr3YCo4O10.5+δ多晶有序化的烧结工艺及电磁性能

采用固相反应法制备了不同烧结温度(950~1 180 ℃)、烧结时间、烧结次数共7种工艺的Sr₃YCo₄O_10.5+δ多晶块材,通过热分析、XRD、SEM确定了有序化相变和最佳烧结工艺(1 180 ℃/24 h+1 180 ℃/24 h),并研究了多晶的电磁性能。结果表明,964 ℃完全晶化的四方相Sr₃YCo₄O_10.5在1 042 ℃吸氧(δ)完成有序化,生成Sr₃YCo₄O_10.5+δ,而1 100 ℃和1 180 ℃烧结的样品均出现(103)、(215)超结构峰,验证了其结构的有序性。块材均呈半导体电输运行为,二次烧结晶格完整性提高,晶粒长大,300 K时电阻率仅为0.06 Ω·cm,居里温度(T_c)~335 K,零场冷曲线(ZFC)上的Hopkinson峰源于低温时被冻结的磁矩随温度升高转向磁场方向,磁化强度在298 K达到最大,随后受热扰动的影响减小。室温铁磁性源于有序结构导致的中自旋或高自旋态Co³⁺的e_g轨道有序。     

类钙钛矿化合物Ca(Mn2 Cu1)Mn4 O12的磁性与磁电阻效应

利用固相反应法制备了名义成分为Ca(Mn2 Cu1 )Mn4 O1 2 的类钙钛矿锰氧化物 .x射线衍射表明 ,为了获得较为致密的样品和减小杂相含量 ,可以采用高温烧结再在 10 73K长时间空气中退火的制备方法 .样品在低温下同时存在铁磁相和反铁磁相 ,由于反铁磁相的存在导致样品在 4 5K时的磁化强度显著降低 ,并在 8T的高磁场下仍未达到饱和 .样品呈半导体导电性质 ,在 85K和 6T磁场下磁电阻比的最大值可达 - 4 6 % .     

高压增氧T′相R_2CuO_(4+δ)(R=Nd～Tm)低温磁性研究

T′相R2CuO4稀土铜氧化合物由于尺度效应而产生弱铁磁性行为已经被人们关注,报导了通过高温高氧压(6GPa,1000℃)合成稀土T′相R2CuO4(R=Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er和Tm)化合物的结构和磁学性能。磁化率曲线显示,在低温下所有的高压增氧R2CuO4样品都出现新的低温弱铁磁性反常行为,转变温度在28K附近。新的低温弱铁磁性行为是由于CuO2面上微量氧空穴的掺入,使处于反铁磁有序CuO2面形成局域化的铁磁性团簇造成。实验证明新发现的低温弱铁磁性行为与尺度效应产生弱铁磁性行为属于完全不同的物理机制。结果还预示T′相R2CuO4稀土铜氧化合物很难通过空穴掺杂而实现超导。     

氟烷基化C_(60)与四（N，N-二甲基）氨基乙烯电荷转移复合物磁性的EPR研究

变温ERP研究揭示氟烷基化富勒烯C_(60)(R_f)_n与四(N,N-二甲基)氨基乙烯 (TDAE)间稳定的电荷转移络合物TDAE-C_(60)(R_f)_n的居里温度高达190K[R_f = C_3F_7，H（CF_2）_4]。而非氟烷基化络合物TDAE-C_(60)的相应值仅为16.1K。 这种铁磁性可能是络合物分子中氟烷基化富勒烯多价阴离子基在相应居里温度下具 有某种有序排列的缘故。     

On the Controversial Fitting of Susceptibility Curves of Ferromagnetic CuII Cubanes: Insights from Theoretical Calculations

This paper reports a theoretical analysis of the electronic structure and magnetic properties of a tetranuclear Cu^II complex, [Cu₄(HL)₄], which has a 4+2 cubane‐like structure (H₃L=N,N′‐(2‐hydroxypropane‐1,3‐diyl)bis(acetylacetoneimine)). These theoretical calculations indicate a quintet (S=2) ground state; the energy‐level distribution of the magnetic states confirm Heisenberg behaviour and correspond to an S₄ spin–spin interaction model. The dominant interaction is the ferromagnetic coupling between the pseudo‐dimeric units (J₁=22.2 cm^?1), whilst a weak and ferromagnetic interaction is found within the pseudo‐dimeric units (J₂=1.4 cm^?1). The amplitude and sign of these interactions are consistent with the structure and arrangement of the magnetic Cu 3d orbitals; they accurately simulate the thermal dependence of magnetic susceptibility, but do not agree with the reported J values (J₁=38.4 cm^?1, J₂=?18.0 cm^?1) that result from the experimental fitting. This result is not an isolated case; many other polynuclear systems, in particular 4+2 Cu^II cubanes, have been reported in which the fitted magnetic terms are not consistent with the geometrical features of the system. In this context, theoretical evaluation can be considered as a valuable tool in the interpretation of the macroscopic behaviour, thus providing clues for a rational and directed design of new materials with specific properties.     

Unexpected Room‐Temperature Ferromagnetism in Nanostructured Bi2Te3

There is an urgent need for the development in the field of the magnetism of topological insulators, owing to the necessity for the realization of the quantum anomalous Hall effect. Herein, we discuss experimentally fabricated nanostructured hierarchical architectures of the topological insulator Bi₂Te₃ without the introduction of any exotic magnetic dopants, in which intriguing room‐temperature ferromagnetism was identified. First‐principles calculations demonstrated that the intrinsic point defect with respect to the antisite Te site is responsible for the creation of a magnetic moment. Such a mechanism, which is different from that of a vacancy defect, provides new insights into the origins of magnetism. Our findings may pave the way for developing future Bi₂Te₃‐based dissipationless spintronics and fault‐tolerant quantum computation.     

Magnetic Coupling Constants of Self‐Assembled CuII [3×3] Grids: Alternative Spin Model from Theoretical Calculations

This paper reports a theoretical analysis of the electronic structure and magnetic properties of a ferromagnetic Cu^II [3×3] grid. A two‐step strategy, combining calculations on the whole grid and on binuclear fragments, has been employed to evaluate all the magnetic interactions in the grid. The calculations confirm an S=7/2 ground state, which is in accordance with the magnetisation versus field curve and the thermal dependence of the magnetic moment data. Only the first‐neighbour coupling terms present non‐negligible amplitudes, all of them in agreement with the structure and arrangement of the Cu 3d magnetic orbitals. The results indicate that the dominant interaction in the system is the antiferromagnetic coupling between the ring and the central Cu sites (J₃=J₄≈?31 cm^?1). In the ring two different interactions can be distinguished, J₁=4.6 cm^?1 and J₂=?0.1 cm^?1, in contrast to the single J model employed in the magnetic data fit. The calculated J values have been used to determine the energy level distribution of the Heisenberg magnetic states. The effective magnetic moment versus temperature plot resulting from this ab initio energy profile is in good agreement with the experimental curve and the fitting obtained with the simplified spin model, despite the differences between these two spin models. This study underlines the role that the theoretical evaluations of the coupling constants can play on the rationalisation of the magnetic properties of these complex polynuclear systems.     

SrRuO3样品的制备及性能研究

利用化学共沉淀法制备了SrRuO3样品.X射线衍射确定样品为单相正交畸变钙钛矿结构.扫描电子显微镜观察了颗粒形貌基本成球形,颗粒尺寸分布在150~300 nm范围之间,SrRuO3样品在161 K温度以下具有铁磁性,SrRuO3样品没有表现出金属导电性.