An improved synthesis of isonitrosoacetanilides

A novel two-step synthesis of isonitrosoacetanilides [2-(hydroxyimino)-N-phenylacetamides] has been developed, involving the initial acylation of aniline derivatives with 2,2-diacetoxyacetyl chloride, followed by reaction with hydroxylamine hydrochloride. The method works equally well with a variety of different aniline derivatives, including those with poor aqueous solubility and those containing electron rich ortho-substituents, neither of which react well under traditional conditions.     

聚合物-Ni(II)膜电极的研究

Ni(Ⅱ)离子可与聚8羟基喹啉、聚邻氨基酚、聚邻苯二胺和聚苯胺络合。聚合物-Ni(Ⅱ)膜电极的循环伏安图有明显的氧化还原蜂, 和彼此相似的电化学特性。聚8羟基喹啉膜(聚邻氨基酚, 聚邻苯二胺)可用以交换Ni(Ⅱ)与H~+离子和分离Ni(Ⅱ)、Co(Ⅱ)和Fe(Ⅱ)离子。     

CuCl_2-CuI体系对苯胺氧化乙氧羰基化生成苯基氨基甲酸乙酯反应的催化作用

本文发现并研究了CuCl_2-CuI体系对苯胺氧化乙氧羰基化生成苯基氨基甲酸乙酯反应的催化作用,考察了各种反应条件对催化剂性能的影响,用测定转化数的方法研究了催化剂的稳定性。单独使用CuCl_2或CuI作为催化剂时,催化活性很低,两者同时使用时,催化活性明显提高。副产物是苯胺氧化偶联反应生成的偶氮苯,反应开始时,主要生成偶氮苯,随着反应的进行,目的产物苯基氨基甲酸乙酯的比例增加,提高反应温度有利于目的产物的生成。     

3,4—二乙酰基—2,5—己二酮与取代苯胺及水合肼的反应

以乙酰丙酮（１）的电氧化偶联产物３，４－二乙酰基－２，５－己二酮（２）为原料，在酸性介质中与取代苯胺（３ａ￣３ｇ）作用，得到１，４－二羰基的缩合产物２，５－二甲基－３，４－二乙酰基－１－芳基吡咯（４ａ￣４ｇ）。在相似的条件下，２与水合肼作用，则得到１，３－二羰基的缩合产物３，３＇，５，５＇－四甲基－１，１＇－二氢－４，４＇－联吡唑（５）。     

氮化铁催化剂的制备及其苯胺催化加氢性能

用α－Ｆｅ２Ｏ３与氨气程序升温还原方法制备出不同温度氮气的氮化铁系列催化剂。通过ＸＲＤ测试对氮化过程中的晶相转变进行了分析。在中压反应装置上考察了氮化铁系列催化剂上苯胺加氢活性以及反应条件对苯胺加氢反应活性的影响。结果表明，在７００℃氮化制香的氮化铁催化剂显示有较高的苯胺加氢活性，在氢压为３．０ＭＰａ，温度为２５０℃，ｎ（Ｈ２）／ｎ（ｏｉｌ）＝１８，液体空速（ＷＨＳＶ）为０．３ｈ＾－１时，该催化剂     

超高交联树脂对苯胺的吸附机理研究

在静态条件下，研究了水溶液中超高交联树脂AM－1和NJ－8及大孔吸附树脂Amberlite XAD－4吸附苯胺的热力学特性，测定了不同温度下的吸附等温线。结果表明，在稀溶液中3种树脂吸附苯胺都符合Langmuir和Freundlich模型，其中AM－1和NJ－8对苯胺的吸附是一个吸热过程；由于AM－1和NJ－8的微孔结构和表面存在酸性基团的吸附中心，对苯胺的吸附是物理吸附和化学吸附共同作用的结果。     

Cu/SiO2催化剂上苯胺和乙二醇一步合成吲哚的研究

采用浸渍法，制备了用于合成吲哚的Cu/SiO2催化剂，研究了不同载体和活性组分Cu对苯胺和乙二醇一步合成吲哚反应的催化活性，发现γ-Al2O3、活性炭、Na-Y，SiO2-MgO、MCM41、SiO26种载体中，SiO2是最好的载体；催化剂活性组分Cu含量为0.78mmol/gSiO2时，吲哚的收率高达88%，考察了水蒸汽、氢气、反应温度及接触时间等因素对反应性能的影响，并对催化剂进行了TG测试，得到了Cu/Sio2催化剂催化合成吲哚适应反应条件。     

TiO2-WO3负载硅钨酸盐聚苯胺膜电极的电化学行为及电催化性能研究

用循环伏安法制备了金属氧化物(TiO2-WO3)负载硅钨酸盐聚苯胺膜修饰玻碳电极(PAn/SiW12/TiO2-WO3/GC),优化了聚合条件,并对该化学修饰电极的电化学行为,包括溶液pH值的影响和电极的稳定性等进行了研究。研究结果表明,此修饰电极聚合物膜不但保持了该杂多酸的电化学活性和电催化性能,又具有良好的稳定性。在0.5 mol/LH2SO4溶液中,该膜电极中的SiW12的第2个还原峰对BrO3-有很好电催化活性,催化过程符合EC平行催化机理。     

Detection of aniline at boron-doped diamond electrodes with cathodic stripping voltammetry

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting aniline by linear-sweep cathodic stripping voltammetry. It was found that the dimeric species (p-aminodiphenylamine and benzidine) formed by anodic oxidation of aniline during the accumulation period are involved in electrochemically reversible redox processes and, in acidic media, the shape of the stripping voltammetric response is suitable for aniline detection in the micromolar concentration range. The low background current of conductive diamond is an advantage compared to other electrode materials and allows a detection limit of 1 μM. Weak adsorption properties and the extreme electrochemical stability are additional advantages of BDD and it was found that, even after long-time measurements, the electrode surface can regain its initial activity by an anodic polarization in the potential region of water decomposition.     

Palladium-catalyzed arylation of N,N-dialkylhydrazines and the subsequent conversion to anilines

Palladium-catalyzed aminations of different ArBr with N,N-dialkylhydrazines are described. The reaction proceeded in moderate to excellent yield (up to 90%) with good functional groups compatibilities as cyano, ester, ketone and Boc-amine groups are all well tolerated. Several hydrazines were proved to be good coupling partners and this process provided a general method for the isosteric replacement of benzyl amines with arylhydrazines. Moreover, a method for the N-N bond cleavage of arylhydrazines was discovered, and this two-step sequence could be employed as an alternative synthesis of aniline derivatives.