烧结温度对Cao.9(NaCe)0.05Bi2Nb2O9无铅压电陶瓷性能的影响

采用传统固相反应法制备了Ca0.9(NaCe)0.05Bi2 Nb2 O9铋层状无铅压电陶瓷.采用XRD、SEM、EDS及相关电学性能测试系统表征了样品的晶体结构、断面形貌、元素组成以及介电、压电、铁电等性能,探究不同烧结温度对于陶瓷性能的影响.结果表明:当烧结温度为1150℃时,样品的晶体结构单一均匀,呈现片层状结构,致密性较好,压电常数高达17 pC/N,介电损耗仅为0.42;,居里温度为908℃,并且具有很好的温度稳定性,说明固相反应法制备的Ca0.9(NaCe)0.05Bi2Nb2O9压电陶瓷最佳烧结温度为1150℃.     

玻璃料对铜基金属结合剂性能及结构的影响

采用粉末冶金法向铜基金属结合剂中引入玻璃料,结合材料电子万能试验机、洛氏硬度仪、SEM等检测方法,研究了玻璃料加入对铜基金属结合剂及金刚石磨具的影响.结果表明,随着玻璃料含量的增加,铜基结合剂的抗折强度和抗冲击强度呈下降的趋势,其硬度呈逐渐上升趋势,硬脆相的引入提高了铜基金属结合剂的自锐性;玻璃相和金属相之间结合紧密,两相之间化学元素在界面处发生相互扩散;玻璃料的加入使结合剂对磨料的包裹更加紧密,大大提高了结合剂对金刚石的把持力,有利于增加金刚石磨具寿命及加工效率.     

玻璃陶瓷材料中Tm3+离子红外到蓝色上转换发光

系统研究了PbF2+GeO2+WO3ⅩⅣTmF3玻璃陶瓷材料中,在近红外光(1.06μm)激发下,Tm3+离子的发光特性.实验中观测到Tm3+离子的两组峰值位置分别在20920cm-1和22173cm-1的蓝色上转换发光,并证实这两组上转换发光分别与吸收三个和四个光子有关,同时建立了上转换发光的模型.为了选择最佳掺杂浓度,详细地测量了Tm3+离子峰值为20920cm-1的蓝色上转换发光强度与TmF3浓度的关系.     

用有限元法计算光学玻璃退火温度的分布

本文首次把求解温度场的有限元法用于计算玻璃退火时的温度分布,提出了在微机上计算第一类光学不均匀性的方案,并解决了计算问题。     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

大口径高光学均匀性磁旋光玻璃研制成功

由中国科学院西安光机所承担研制的“大口径高光学均匀性磁旋光玻璃研制”项目日前通过专家鉴定．专家表示，该成果填补了国内空白，主要技术指标达到国际先进水平．同时建议进一步加强该项目的应用推广，力争研制更大尺寸的磁旋光玻璃，以满足我国科研工作和国家经济建设事业的需要．     

Ce3+对Er3+/Yb3+共掺氟磷酸盐玻璃光谱性质的影响

研究了能量接受离子Ce3+对Er3+上转换发光强度以及Er3+在1.5 μm附近波段发光性能参数的影响,并从能量匹配及能级结构角度出发对Er3+/Ce3+间的能量转移机制进行了分析.分析认为,4 I11/2能级的Er3+通过无辐射能量转移把能量传递给2F5/2能级的Ce3+激发其跃迁至2F7/2能级,而4I11/2能级上的Er3+则无辐射弛豫至4I13/2能级,从而有效降低氟磷酸盐玻璃中Er3+的上转换发光.当Er3+浓度为1.11×1020 cm-3时,Ce3+的最佳掺杂浓度为2.22×1020 cm-3,此时Ce3+的引入不仅可以降低上转换发光,而且有助于提高Er3+在1.5 μm附近波段的荧光强度、发射截面以及4I13/2能级荧光寿命.     

Luminescent Properties and Mechanism of Gd1-x-yAlO3Eux,REy

GAP:Eu,Re(Gd1-x-yAlO3Eux,REy?A，RE=Pr or Ce) powders were prepared by a nitrate-citrate process. It is found that luminescent intensity decreases when GAP:Eu is co-doped with Pr or Ce. The phenomena of spectra prove that there is a resonant energy transfer between Eu and Pr, by the absorption and emission of lower-energy phonon, and also Ce sensitizer decreases the activator energy level from host→Eu. The two factors are considered to be the main reasons for decrease of the luminescent intensity for the co-doped GAP:Eu,Re.