Moisture barrier of AlxOy coating on poly(ethylene terephthalate), poly(ethylene naphthalate) and poly(carbonate) substrates

The moisture barrier property of Al_xO_y coated poly(ethylene terephthalate) (PET), poly(ethylene naphthalate) (PEN) and poly(carbonate) (PC), have been investigated. The differences in the morphology of the Al_xO_y sputtered grown on these substrate were investigated using atomic force microscopy (AFM). The initial growth of the Al_xO_y followed closely the topology of the substrate and an amplified roughness was observed. In the fully grown Al_xO_y, the comparative roughness followed that of the substrates. It has been found that a single layer Al_xO_y improved the moisture barrier of PET by an order of magnitude, PC by two orders of magnitude while no improvement was observed for PEN. UV-ozone treatment on PC further improved the moisture barrier, while no improvement was observed for PET and PEN. The comparative effects of the substrate surface roughness and surface energy on the moisture barrier are discussed.     

统计模拟分光光度法测定复方消咳新片组分含量

用统计模拟分光光度法测定复方消咳新片４个组分含量。按均匀设计表制备合成样品，绘制溶液的ＵＶ－ＶＩＳ吸收曲线，获得有限但足够的实验数据，用逐步回归法构造反映该复方制剂组分在灵敏波长的吸光度－组分含量经验关系的“最优”数学模型，用改进单纯形法寻优，求出未知样品的各组分含量。磺胺甲基异恶唑、甲氧苄胺嘧啶、盐酸溴已新、枸橼酸维静宁的回收率分别为１００３％、１００４％、９９９％、９９０％，标准差分别为０９１％、１４％、１２％、３９％。     

紫外分光光度法测定甲砜霉素片的含量

根据甲砜霉素的紫外吸收特征,建立了以乙腈-水为溶媒、(225±1)nm为最大吸收波长的紫外分光光度法。方法的线性范围为0.5～25.0μg/mL,平均回收率为99.92％,RSD为0.30％。用对照品比较法测定5批甲砜霉素片的含量,并与中国药典方法的测定结果进行比对,结果表明,两种方法的测定结果基本一致。     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

PP/PC共混材料的研究概况

从加工方式对制备简单机械共混PP/PC共混物性能的影响,增容体系中增容剂的种类、增容效果和不同填充物对共混体系的增强效果三方面综述了近年来国内外对PP/PC共混材料的研究概况,指出了其研究方向和发展前景。     

毛细管区带电泳法测定复方甘草片中的甘草酸、甘草次酸、吗啡和苯甲酸钠

 在紫外检测波长为 2 2 8nm、电压为 14kV、背景电解质为 5 0mmol/L硼砂溶液、内标为氢氯噻嗪的条件下 ,用毛细管区带电泳法对复方甘草片中的甘草酸、甘草次酸、吗啡和苯甲酸钠进行了定量分析。结果甘草酸、甘草次酸、吗啡和苯甲酸钠的相对峰面积 (组分与内标的峰面积之比 )与各自的质量浓度之间呈良好的线性关系 ,上述 4种组分的平均回收率分别为 98 2 % ,97 3% ,97 1%和 97 5 %。方法简便、快速、准确。     

高效毛细管电泳电导法快速检测复方维生素B片中的VB1、VB12、VB6和VC

采用高效毛细管电泳电导法同时分离、测定了复方维生素B片中的主要成分VB1, VB12,VB6和VC的含量.研究了运行缓冲溶液的酸度和浓度、电泳电压、进样时间等因素对电泳的影响.在优化的实验条件下40 mmol/L Tris -4 mmol/L H3BO3 (pH 8.0) 的缓冲溶液中加入0.30 mmol/L CTAB(溴化十六烷基三甲基铵),分离电压为15 kV,上述4组分在5 min内得到良好的分离.维生素B1,B12,B6和VC的线性范围分别为5.5～1.0 mg/mL; 15～1.5 mg/mL; 1.0～0.40 mg/mL和6.6～0.80 mg/mL; 检测限分别为0.80 μg/mL, 4.0 μg/mL, 0.50 μg/mL, 2.9 μg/mL; 5次测定峰高的相对标准偏差分别为2.2%, 1.6%, 3.9%, 2.8%.5次测定的平均回收率分别为99%, 94%, 100%, 97%.     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.