从知识传授到育人:高职“生活中的化学”教学实践*

深挖高职院校公选课“生活中的化学”的育人元素,精心设计教学内容,运用课堂主题辩论、趣味生活实验的设计与展示、探秘生活中的化学等理论知识传授与课内外实践相结合的教学方式,实现全过程育人,充分展现了公选课在立德树人方面的价值。     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

甲烷浓度对碳化硅基底金刚石薄膜摩擦性能影响

利用热丝化学气相沉积法(HFCVD)在碳化硅基底上制备金刚石薄膜,采用场发射扫描电子显微镜、拉曼光谱仪、原子力显微镜研究了在不同甲烷浓度条件下制备的金刚石薄膜表面形貌及物相组成,在干摩擦条件下通过往复式摩擦磨损实验测试并计算了已制备金刚石薄膜的摩擦系数和磨损率,结合物相分析及摩擦磨损实验结果分析了甲烷浓度的改变对金刚石薄膜摩擦磨损性能的影响。结果表明,由于甲烷气体含量的升高,金刚石薄膜结晶质量下降,薄膜由微米晶向纳米晶转变。摩擦磨损实验结果显示:3%甲烷浓度条件下制备的金刚石薄膜耐磨性较好,磨损率为2.2×10^-7 mm³/mN;5%甲烷浓度条件下制备的金刚石薄膜摩擦系数最低(0.032),磨损率为5.7×10^-7 mm³/mN,制备的金刚石薄膜的耐磨损性能相比于碳化硅基底(磨损率为9.89×10^-5 mm³/mN)提升了两个数量级,显著提高了碳化硅基底的耐磨性。     

Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

考虑货架存放期的经济批量排产问题的求解

在化工、造纸、制药、钢铁等工业生产中，一台设备或一条生产线可以生产多种产品的情况很常见。在生产中，如何安排各类产品的生产顺序以及生产数量显得十分重要。这类问题通常称作经济批量排产问题，这类问题是生产库存中的经典问题。本文研究的经济批量排产问题考虑了产品货架存放期因素，针对以往研究的不足，本文提出用批量变动方法求解该类问题，由计算结果显示，按照这种排产方法花费的成本要低于其他两种经济批量排产问题常用的方法。     

标的资产价格服从跳-扩散过程的具有随机寿命的未定权益定价

本文在假设被终止或取消的风险与重大信息导致的标的资产价格跳跃的风险为非系统风险的情况下,应用无套利资本资产定价,推导出了标的的资产的价格服从跳-扩散过程具有随机寿命的未定权益满足的偏微分方程,然后应用Feynman-kac公式获得了未定权益的定价公式.     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Stochastic analysis in life office management: applications to large annuity portfolios

The paper deals with the riskiness analysis for a large portfolio of life annuities. By means of the limiting distribution of the present value of the portfolio, in the first part of the paper a model for evaluating the investment and the projection risks is presented. In the second part, with regard to the investment risk's effects, the insolvency risk is measured considering the cumulative probability distribution function of the discounted average cost per policy. Copyright © 2003 John Wiley & Sons, Ltd.