Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface

Muscovite mica is a widely accepted substrate for scanning probe microscopy (SPM) investigations. However, mica has intrinsic properties that alter samples and obstruct their analysis due to free charges build-up, ionic exchange and water adsorption taking place at the surface. In addition to interfacial phenomena, there is a growing interest in electrostatic charges on insulators as they are crucial in diverse applications. Despite the high demand for studies of this nature, experimental set-ups capable of resolving charge build-up at the micro-scale are still scarce and technically limited. Here, we report the imaging of surface charge dissipation on freshly cleaved mica by Kelvin-probe Force Microscopy (KPFM). A local electrostatic charge micro-domain was generated by friction between an atomic force microscope (AFM) tip and mica, and its decay was tracked by two-dimensional mapping using KPFM. We found time-dependent charge dissipation, which is attributed to the adsorption of water molecules on mica surface.     

A gold-based nanobeacon probe for fluorescence sensing of organophosphorus pesticides

A nanomaterials-based novel molecular beacon has attracted growing attentions in fluorescent assays as many nanomaterials possess excellent quenching efficiency. In this work, a gold-based nanobeacon probe was established to detect organophosphorus pesticides for the first time. The constructed gold-based nanobeacon acted as a signal indicator and could display the decreasing of the intensity in the presence of targets, which competitively bound to single strand DNA. To achieve a high sensitive probe, some parameters including solution pH, temperature and reaction time were investigated and optimized. The gold-based nanobeacon probe assay was proved to be rapid and sensitive to achieve a detection limit of 0.035 μM for isocarbophos, 0.134 μM for profenofos, 0.384 μM for phorate and 2.35 μM for omethoate, respectively. The prepared nanobeacon effectively reduced the background and improved the detection sensitivity and selectivity. The probe is stable, easy to operate and does not need sophisticated instruments. These features makes the probe feasible for screening trace organophosphorus pesticides in real samples.     

激光等离子体2660紫外探针及干涉系统

成功地在六路高功率Nd玻璃激光装置上建立了2660紫外激光探针和适合紫外波段的Normaski干涉仪,首次将可见波长的连续激光应用于紫外干涉仪中靶成像调整和光路准直。利用该紫外光干涉仪,在铜柱状靶(φ500μm)上测量了厚等离子体中高达0.6n。的电子密度。     

近场光学显微技术

本文在介绍近场光学显微镜原理的基础上，对近场光学显微技术进行了一定深度的探讨，并着重研究了纳米级探针的制作和纳米级样品与探针间距的控制这两个近场光学显微技术中的关键问题，说明了近场光学显微探针的工作方式，阐述了近场光学成像的衬度类型，介绍了近场光学显微技术在多个领域的应用。在参考大量国内外最新研究成果的基础上，提出了一些个人的见解。     

Study of adsorption of oxygen on β-Al2O3 + Au and β-Al2O3 + Pt: Work function measurements—proposition of a model

To improve the understanding of the electrochemical effects observed on an original potentiometric gas sensor, interactions of oxygen with the device were investigated. This gas sensor is made of a solid electrolyte (treated Na-β-alumina) associated with two metallic electrodes (gold and platinum) located in the same gas mixture. Adsorption of charged oxygen species, considered responsible for the electrical response developed by the sensor, was investigated by work function measurements. Results showed that charged oxygen species only form on partially gold or platinum covered solid electrolyte. Comparison of these results with those obtained in a previous calorimetric study of interactions between oxygen and the same materials suggests the existence of at least two different oxygen species adsorbed on the surface of the sensitive element. The first one, located on the solid electrolyte surface, is neutral and characterized by an endothermal reaction of formation. The second one is charged and probably produced at the gas/solid electrolyte/metallic electrode interface. A mechanism based on the concept of “three phase boundary” and similar to the “reverse spillover” phenomenon is proposed to account for the adsorption of these oxygen species.     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

元素在石墨炉内石墨探针表面上的原子化机理研究：Ⅶ.锗的原子化机理

本文应用Ｘ－射线衍射，Ｘ－射线光电子能谱，俄歇电子能谱和其它一些实验，考察石墨炉升温过程中氟化锗，锗酸钠在石墨探针表面上的形态变化，阐明了它们的原子化机理：ＧｅＦ２与Ｎａ２ＧｅＯ３首先分解为ＧｅＯ２，ＧｅＯ２还原为ＧｅＯ，后者在＞２４００Ｋ热分解产生自由态的锗原子，ＧｅＦ２和Ｎａ２ＧｅＯ３的原子化均源于ＧｅＯ（ｇ）的气相分解。原子化的升温过程中，在１４００－２４００Ｋ ＧｅＦ２和Ｎａ２ＧｅＯ３都产     

Modeling of RF plasma torch with a metallic tube inserted for reactant injection

Flow, temperature, and electromagnetic (EM) fields in a radio-frequency thermal plasma torch designed for the preparation of superconducting powders or films have been analysed by using a new two-dimensional modeling approach with the electric field intensity as the fundamental EM field variable. The insertion of a stainless steel injection tube into the torch leads to large induction currents in this tube. Although such large induction currents cause pronounced changes of the EM fields near the injection tube, flow and temperature fields are little affected. There exists only one large toroidal vortex in the upper part of the present torch, while the maximum temperature appears at an off-axis location within the coil region.     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。