Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Block copolymers of acrylic acid and butyl acrylate prepared by reversible addition–fragmentation chain transfer polymerization: Synthesis,characterization, and use in emulsion polymerization

Amphiphilic block copolymers of poly(acrylic acid‐b‐butyl acrylate) were prepared by reversible addition–fragmentation chain transfer polymerization in a one‐pot reaction. These copolymers were characterized by NMR, static and dynamic light scattering, tensiometry, and size exclusion chromatography. The aggregation characteristics of the copolymers corresponded to those theoretically predicted for a star micelle. In a butyl acrylate and methyl methacrylate emulsion polymerization, low amounts of these copolymers could stabilize latices with solid contents up to 50%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 684–698, 2003     

Self-assembled lipid nanotube hosts: The dimension control for encapsulation of nanometer-scale guest substances

Supramolecular nanotube hosts with precisely controlled inner or outer diameters have been synthesized by self-assembly of unsymmetrical bolaamphiphilic monomers or glucopyranosylamide lipids, respectively. Time-resolved fluorescent measurement using 8-anilinonaphthalene-1-sulfonate (ANS) as a probe revealed that the water confined in a cardanyl-β-D -glucopyranoside lipid nanotube has relatively lower solvent polarity corresponding to that of propanol than bulk water. Extensively developed hydrogen bond networks also characterize the confined water in comparison to the case in bulk water. Encapsulation ability of the glucopyranosylamide lipid nanotube has been examined by filling the lyophilized LNTs with gold or silver nanoparticles, ferritin, or magnetic crystals. Filling the unsymmetrical bolaamphiphile nanotube possessing positively charged inner surfaces with negatively charged polymer beads or ferritin proved to be successful without depending on capillary action. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5137–5152, 2006     

Photocrosslinked poly(vinylbenzophenone)‐core micelles via mild Friedel–Crafts benzoylation of polystyrene amphiphiles

Photocrosslinkable poly(vinylbenzophenone)‐containing polymers were synthesized via a one‐step, Friedel–Crafts benzoylation of polystyrene‐containing starting materials [including polystyrene, polystyrene‐block‐poly(tert‐butyl acrylate), polystyrene‐block‐poly(ethylene oxide), polystyrene‐block‐poly(methyl methacrylate), and polystyrene‐block‐poly(n‐butyl acrylate)] with benzoyl trifluoromethanesulfonate as a benzoylation reagent. The use of this mild reagent (which required no added Lewis acid) permitted polymers with well‐defined compositions and narrow molecular weight distributions to be synthesized. Micelles formed from one of these benzoylated polymers, [polystyrene_0.25‐co‐poly(vinylbenzophenone)_0.75]₁₁₅‐block‐poly(acrylic acid)₁₄, were then fixed by the irradiation of the micelle cores with UV light. As the irradiation time was increased, the pendent benzophenone groups crosslinked with other chains in the glassy micelle cores. Dynamic light scattering, spectrofluorimetry, and Fourier transform infrared spectroscopy were all used to verify the progress of the crosslinking reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2604–2614, 2006     

Formation of polymeric micelles with amino surfaces from amphiphilic AB‐type diblock copolymers composed of poly(glycolic acid lysine) segments and polylactide segments

Amphiphilic AB‐type diblock copolymers composed of hydrophobic poly(L ‐lactide) (PLA) segments and hydrophilic poly(glycolic acid lysine) [poly(Glc‐Lys)] segments with amino side‐chain groups self‐associated to form PLA‐based polymeric micelles with amino surfaces in an aqueous solution. The average diameter of the loose core–shell polymeric micelles for poly(Glc‐Lys) [number‐average molecular weight (M_n) = 1240]‐b‐PLA (M_n = 7000) obtained by a dimethyl sulfoxide/water dialysis method was estimated to be about 50 nm in water by dynamic light scattering measurements. The size and shape of the obtained polymeric micelles were further observed with transmission electron microscopy and atomic force microscopy. To investigate the possibility of applying the obtained PLA‐based polymeric micelles as bioabsorbable vehicles for hydrophobic drugs, we tested the entrapment of drugs in poly(Glc‐Lys) (M_n = 1240)‐b‐PLA (M_n = 7000) micelles and their release with doxorubicin as a hydrophobic drug. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1426–1432, 2002     

Preparation of block copolymer vesicles in solution

Block copolymer vesicles can be prepared in solution from a variety of different amphiphilic systems. Polystyrene‐block‐poly(acrylic acid), polystyrene‐block‐poly(ethylene oxide), and many other block copolymer systems can produce vesicles of a wide range of sizes; those in the range of 100–1000 nm have been explored extensively. Different factors, such as the absolute and relative block lengths, the presence of additives (ions, homopolymers, and surfactants), the water content in the solvent mixture, the nature and composition of the solvent, the temperature, and the polydispersity of the hydrophilic block, provide control over the types of vesicles produced. Their high stability, resistance to many external stimuli, and ability to package both hydrophilic and hydrophobic compounds make them excellent candidates for use in the medical, pharmaceutical, and environmental fields. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 923–938, 2004     

A new class of low-molecular-weight amphiphilic gelators

A new powerful class of low-molecular-weight amphiphilic compounds has been synthesized and their structure-property relationships with respect to their gelation ability of organic solvents have been investigated. These compounds are able to gel organic solvents over a broad range of polarity. Especially polar solvents such as valeronitrile and gamma-butyrolactone can be gelled even at concentrations far below 1 wt %. It was found that the gelation ability of these asymmetrically substituted p-phenylendiamines depends on a well-balanced relation of the terminal head group, the units involved in hydrogen bonding (amide or urea groups), and on the length of the alkyl chain. With this class of new gelators it is possible to tailor thermal and mechanical properties in different organic solvents and open various application possibilities.     

Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.     

Nanotechnology with soft materials.

Nature exploits self-organization of soft materials in many ways, to produce cell membranes, biopolymer fibers and viruses, to name just three. Mankind is now able to design materials at the nanoscale, whether through atom-by-atom or molecule-by-molecule methods (top-down) or through self-organization (bottom-up). The latter method encompasses soft nanotechnology. Self-organization of soft materials can be exploited to create a panoply of nanostructures for diverse applications. The richness of structures results from the weak ordering because of noncovalent interactions. Thus, thermal energy is important as it enables transitions between phases with differing degrees of order. The power of self-organization may be harnessed most usefully in a number of nanotechnology applications, which include the preparation of nanoparticles, the templating of nanostructures, nanomotor design, the exploitation of biomineralization, and the development of functionalized delivery vectors.     

Bola型阴离子表面活性剂与溴化十二烷基三乙铵混合体系的表面性质与聚集行为

研究了具有简单结构的bola型阴离子表面活性剂二十酸二钠（C_(20)Na_2)与 阳离子型普通表面活性剂溴化十二烷基三乙铵（C_(12)Et_3）混合体系的表面性质 ，发现混合体系的cmc和γ_(cmc)比C_(12)Et_3单一体系未有显著降低。以负染色 ，FF-TEM，动态光散射（DLS）及粘度方法研究了混合体系的聚集行为，发现混合 体系中同时形成球形囊泡和管状聚集体，提出了产生这种聚集行为的机制。