Alkaline oxygen evolution: exploring synergy between fcc and hcp cobalt nanoparticles entrapped in N-doped graphene

Herein, we report a Mott-Schottky catalyst by entrapping cobalt nanoparticles inside the N-doped graphene shell (Co@NC). The Co@NC delivered excellent oxygen evolution activity with an overpotential of merely 248 mV at a current density of 10 mA cm^–2 with promising long-term stability. The importance of Co encapsulated in NC has further been demonstrated by synthesizing Co nanoparticles without NC shell. The synergy between the hexagonal close-packed (hcp) and face-centered cubic (fcc) Co plays a major role to improve the OER activity, whereas the NC shell optimizes the electronic structure, improves the electron conductivity, and offers a large number of active sites in Co@NC. The density functional theory calculations have revealed that the hcp Co has a dominant role in the surface reaction of electrocatalytic oxygen evolution, whereas the fcc phase induces the built-in electric field at the interfaces with N-doped graphene to accelerate the H⁺ ion transport.     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

Mesoporous nanotube aggregates obtained from hydrothermally treating TiO2 with NaOH

Nanotube aggregates with high porosity were prepared from hydrothermal treatment of TiO₂ particles in NaOH at 130 °C, followed by HCl rinsing to different pH values. Pore structure of the aggregates, which were mainly mesoporous, was characterized by analyzing the N₂ sorption isotherm with different methods including the t-plot and density function theory. The surface area, pore volume and mean pore size of the aggregates increased with the rinsing acidity to reach a maximum (e.g. 400 m²/g in surface area) at pH 1.6 and then decreased with further increase of the acidity. The crystalline phase and composition of the aggregates were, as well, significantly affected by the acidity of the post-treatment rinsing. Large-surface area aggregates were of loosely-attached nanotubes, composed of both anatase TiO₂ and H₂Ti₂O₅·H₂O, obtained under a mildly acidic rinsing condition, while basic or highly acidic conditions resulted in the formation of closely coagulated dense structures consisting of different crystalline phases.     

Preparation and characterization of nitrogen-doped TiO2 photocatalyst in different acid environments

Nitrogen-doped TiO₂ powders were successfully prepared by a wet method, i.e., a micro-emulsion-hydrothermal method, in different acid environments. Several characterization techniques, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra, were combined to determine the crystal phase, concentration and chemical states of the nitrogen doped in TiO₂. The high photocatalytic activity of the nitrogen-doped TiO₂ was evaluated through the decomposition of rhodanmine B under visible light irradiation. It was suggested that the doped nitrogen formed oxynitride (NO) and produced impurity states at higher above the valence band of TiO₂. Therefore, the nitrogen doping could enhance the response of photocatalyst to the visible light and improve the photocatalytic activity because of the narrowing of band gap of TiO₂.     

新型氮芥和卤代烷基哌嗪芳香醛的合成

通过对Vilsmeier反应、烷基化反应和氯化反应的改进提出了以简单易得的苯胺和苯基哌嗪为原料制备氮芥和哌嗪芳香醛的方法. 采用该改进的方法合成了8个氮芥和哌嗪芳香醛, 其中7个为新化合物. 它们的结构均经质谱、红外光谱、核磁共振谱和元素分析确证.     

Concentrations of Active Species in the Flowing Afterglow of a Nitrogen Microwave Plasma

Measurements of nitrogen atom density, by means of NO chemical titration, along with an evaluation of the densities of some excited species N ₂ (B, v=11), N ₂ (B, v=2), N ₂ (C, v=0), and N ₂ ⁺ (B,v=0), by means of a spectroscopic study of some bands of dinitrogen, are achieved along the flowing afterglow of a dinitrogen microwave plasma (2450 MHz) for several pressures. The concentrations obtained are in the following range: [N]10 ⁺¹⁵ , [N ₂ (B, 2)]10 ⁺⁹ –10 ⁺¹⁰ , [N ₂ (B, 11)]10 ⁺⁸ –10 ⁺⁹ , [N ₂ (C, 0)]10 ⁺⁶ –10 ⁺⁷ , [N ₂ ⁺ (B,0)]10 ⁺⁶ -10 ⁺⁸ (cm^-3). From a kinetic study of the formation and decay of excited and charged species, an estimation of N ₂ (A, v), N ₂ (X, v, and N ₂ ⁺ (X) densities can be derived: [N ₂ (A, v)]10 ⁺¹² , [N ₂ (X, v6)]10 ⁺¹⁵ –10 ⁺¹⁶ , [N ₂ (X, v12)]10 ⁺¹⁴ –10 ⁺¹⁵ , [N ₂ ⁺ (X)]10 ⁺¹⁰ (cm ^-3 ).     

Co(III)氮芥配合物的合成、表征及其抗肿瘤活性的初步评价

低氧条件下,钴(Ⅲ)的氮芥配合物具有合适的还原电位,就可能还原得到比较活泼的Ｃｏ(Ⅱ)配合物,在溶液中其活性配体很快被体内的小分子取代,释放出的活性配体可以杀死低氧区内外的癌细胞,因此筛选合适的钴配合物作为低氧选择性抗癌药物的研究很有意义。本文以双 (2 氯乙基)胺(简称ＢＣＡ)为活性配体,取代乙酰丙酮为辅助配体,合成一系列Ｃｏ(Ⅲ)配合物(下图)。初步评估结果表明,其中两个配合物具有一定的低氧选择性,配合物的还原电位对药物的低氧选择性影响很大,合适的还原范围可能比较窄。1　实验部分1.1　试剂与仪器按文献[1]的方法合成…     

三效催化剂作用下的NO+CO催化反应机理

NO与CO在Pt/Rh/Pd及载体组成的三效催化剂上的氧化还原应用是控制汽车尾气对空气污染的一个关键反应，这一反应随着近年来对环境保护的日益重视而成为国内外研究的热点，本文主要综述了NO及CO在Pt,Rh,Pd上的吸附及反应机理的实验及理论研究现状，总结得出：在三效催化剂对NO CO的催化反应中，Pt,Pd对CO的催化氧化起主要作用，而Rh对NO的解离有很好的活化作用。     

重油催化裂化汽油中含氮化合物的分析

利用酸萃取技术浓缩分离重油催化裂化（RFCC）汽油中的氮化物，比较了两种萃取剂和两种油剂比对分离效果的影响，结果发现选用10％（体积分数）HCl作萃取剂，油剂比为10：1（体积比）时，碱性氮化物的提取率较高；浓缩分离出的氮化物用色谱－质谱联用方法对其进行了检测，结果表明RFCC汽油中的氮化物主要是C0－C2苯胺及少量吡啶类、喹啉类碱性氮化物。     

Au/CeO2/Y和Au-MFe2O4催化剂用于有氧条件下CH4还原NOx的研究

以CeO2／Y分子筛和MFe2O4(M=Ni,Co，Zn)为载体，制备Au／CeO2／Y和Au-MFe2O4负载型金催化剂．用CH4做还原剂，考察了它们在有氧条件下催化还原NOχ的活性．结果表明：在Au-Y中引人助剂Ce，使得Au／CeO2／Y的催化活性高于Au／Y；Au-CoFe2O4的催化活性高于Au-Fe2O3，反应温度为300℃时，NOχ在Au-CoFe2O4上的转化率达到39．70%．