Synthesis and photocatalytic properties of porous TiO2 films prepared by ODA/sol-gel method

Porous TiO₂ films were deposited on SiO₂ pre-coated glass-slides by sol-gel method using octadecylamine (ODA) as template. The amount of ODA in the sol played an important role on the physicochemical properties and photocatalytic performance of the TiO₂ films. The films prepared at different conditions were all composed of anatase titanium dioxide crystals, and TiO₂ crystalline size got larger with increasing ODA amount. The maximum specific surface area of 41.5 m²/g was obtained for TiO₂ powders prepared from titanium sol containing 2.0 g ODA. Methyl orange degradation rate was enhanced along with increasing ODA amount and reached the maximal value at 2.0 g addition of ODA. After 40 min of UV-light irradiation, methyl orange degradation rate reached 30.5% on the porous film, which was about 10% higher than that on the smooth film. Porous TiO₂ film showed almost constant activity with slight decrease from 30.5% to 28.5% after 4 times of recycles.     

TiO2 activation using acid-treated vermiculite as a support: Characteristics and photoreactivity

Vermiculite was treated by sulfuric or nitric acid aqueous solutions with different concentration. These modified materials as the promising supports, were used to immobilize TiO₂. TiO₂ was prepared by the precursor, which was obtained by substituting partly isopropyl alcohol with Cl⁻ in titanium chloride {[Ti(IV)(OR)_nCl_m] (n = 2-3, m = 4 − n)}. The TiO₂/vermiculite composites were characterized by X-ray diffraction, scanning electron microscopy, and the nitrogen absorption. Their photocatalytic activity was evaluated by removal of methylene blue (MB). The pure anatase type crystalline phase was well deposited on the supports. The concentrations of acid for treatment had a significant influence on pore sizes and surface area of vermiculite. The treatment process changed microstructure of vermiculite, modified its characteristics, and farther improved the catalytic activity and absorption capacity of TiO₂/vermiculite composites. The treatment effect of nitric acid was superior to that of sulfuric acid.     

Structural properties of single and multilayer ITO and TiO2 films deposited by reactive pulsed laser ablation deposition technique

Indium tin oxide (ITO) and titanium dioxide (TiO₂) single layer and double layer ITO/TiO₂ films were prepared using reactive pulsed laser ablation deposition (RPLAD) with an ArF excimer laser. The films were deposited on SiO₂ substrates heated at 200 and 400 °C. ITO and TiO₂ films with uniform thicknesses of about 400 and 800 nm, respectively, over large areas were prepared. X-ray diffraction (XRD) analysis revealed that the ITO films are formed of highly orientated nanocrystals with an average particle size of 10-15 nm. Atomic force microscopy (AFM) observations indicate rough ITO films surfaces with average roughness of 26-30 nm. Pores were also observed. TiO₂ films deposited on the prepared ITO films result less crystalline. Annealing at 300 and 500 °C for three consecutive hours promoted formation of TiO₂ anatase phase, with crystal size of ∼6-7 nm. From the scanning transmission electron microscope (STEM) images, it can be seen that the TiO₂ films deposited onto the prepared ITO films present a relatively high pore sizes with an average pore diameter of ∼40 nm and excellent uniformity. In addition, STEM cross-sectional analysis of our films showed a columnar structure but no evidence of voids in the structure. Therefore, films exhibited large surface area, well suited for dye-sensitized solar cells (DSSC) applications.     

The application of Raman and anti-stokes Raman spectroscopy for in situ monitoring of structural changes in laser irradiated titanium dioxide materials

The use of Raman and anti-stokes Raman spectroscopy to investigate the effect of exposure to high power laser radiation on the crystalline phases of TiO₂ has been investigated. Measurement of the changes, over several time integrals, in the Raman and anti-stokes Raman of TiO₂ spectra with exposure to laser radiation is reported. Raman and anti-stokes Raman provide detail on both the structure and the kinetic process of changes in crystalline phases in the titania material. The effect of laser exposure resulted in the generation of increasing amounts of the rutile crystalline phase from the anatase crystalline phase during exposure. The Raman spectra displayed bands at 144 cm⁻¹ (A1g), 197 cm⁻¹ (Eg), 398 cm⁻¹ (B1g), 515 cm⁻¹ (A1g), and 640 cm⁻¹ (Eg) assigned to anatase which were replaced by bands at 143 cm⁻¹ (B1g), 235 cm⁻¹ (2 phonon process), 448 cm⁻¹ (Eg) and 612 cm⁻¹ (A1g) which were assigned to rutile. This indicated that laser irradiation of TiO₂ changes the crystalline phase from anatase to rutile. Raman and anti-stokes Raman are highly sensitive to the crystalline forms of TiO₂ and allow characterisation of the effect of laser irradiation upon TiO₂. This technique would also be applicable as an in situ method for monitoring changes during the laser irradiation process.     

Effect of the surface treatment of the TiO2 fillers on the properties of hexanoyl chitosan/polystyrene blend-based composite polymer electrolytes

Surface treatment of TiO₂ was done by immersing filler particles in 2 and 4 % sulphuric acid (H₂SO₄) aqueous solutions. Untreated, 2 and 4 % H₂SO₄-treated TiO₂ were referred as neutral, weakly acidic, and acidic TiO₂, respectively. Composite polymer electrolytes (CPEs) based on hexanoyl chitosan–polystyrene blend were prepared by using lithium trifluromethanesulfonate (LiCF₃SO₃) as the doping salt and three different types of the TiO₂ fillers. X-ray diffraction (XRD) results showed that the addition of TiO₂ reduced the crystalline fraction of the electrolytes. The conductivity performance of the CPEs varied in the order: acidic?<?weakly acidic?<?TiO₂ free?<?neutral TiO₂. A model based on the interaction between Lewis acid–base sites of TiO₂ with ionic species of LiCF₃SO₃ has been proposed to understand the conductivity mechanism brought about by the different types of fillers. The conductivity enhancement by neutral TiO₂ is attributed to the increase in the mobility of Li⁺ cations. Acidic TiO₂ decreased the conductivity by decreasing the anionic contribution. The conductivity variation with filler content was discussed on the basis of the number of free ions.     

Spectroscopic Characterization of Porphyrin-Doped Sol-Gel-Derived Matrices

Absorption and fluorescence spectra were measured for metal free (HTSPP) and zinc (ZnTSPP) sulfonated porphyrins in SiO₂ and TiO₂ matrices produced by the sol-gel technique. These are compared to correspondent data obtained for the two porphyrins in ethanol at different pH values. In the silica medium (acidic), HTSPP is diprotonated and forms aggregates. This effect is found to be reversed on exposure to ammonia vapor and occurs to a much lower degree in titania matrices. This is possibly because of the smaller amount of solvent retained in the pore structure. The main effect of incorporating ZnTSPP in sol-gel-derived matrices is demetallation, although to a lesser extent than in acidic solution.     

Acetone gas phase condensation on alkaline metals doped TiO2 sol-gel catalysts

The vapor-phase condensation of acetone was studied over sol-gel prepared TiO₂ and TiO₂-doped with 1 wt.% of Li⁺ or Rb⁺. The acetone condensation was catalyzed by basic sites and the obtained products were mesityl oxide (MO), isomesityl oxide (ISMO), mesitylene (M) as well as isophorone (IP) and phorone (P). The TiO₂ crystalline structure was characterized by XRD and the basicity of catalysts by means of CO₂ chemisorption. The number of basic sites was 0.057 mmol CO₂/g for TiO₂ and Rb/TiO₂ and 0.676 mmol CO₂/g for Li/TiO₂ catalyst. CO₂-TPD showed that the strongest of the basic sites follows the order Rb/TiO₂ > TiO₂ > Li/TiO₂. Activity was found of the same order in the three catalysts. Selectivity patterns shown that MO (70%) was the main product in Li/TiO₂ while for TiO₂ and Rb/TiO₂ comparable amounts of MO (41 and 44%) and M (39 and 39%) were obtained.     

Photocatalytic abilities of gel-derived P-doped TiO2

P-doped TiO₂ nanoparticles were synthesized through hydrolysis and condensation of Ti(OC₂H₅)₄ with H₃PO₄ additions. Effects of [H₃PO₄]/[Ti(OC₂H₅)₄] molar ratios on the anatase-to-rutile phase transformation, crystallite sizes, surface areas, and photocatalytic abilities of the gel-derived P-doped TiO₂ were investigated. The P-doped TiO₂ nanoparticles prepared by [H₃PO₄]/[Ti(OC₂H₅)₄]=0.03 were composed of anatase monophase even at 900 ^oC and possessed very strong photocatalytic ability. Kinetic studies on the P-doped TiO₂ to photocatalytically decompose methylene blue under irradiation of 365 nm UV light found that the P-doped TiO₂ prepared by [H₃PO₄]/[Ti(OC₂H₅)₄]=0.03 and calcined at 800 ^oC had the specific reaction rates, at 25 °C, k_A,m=0.76 m³/(kg min) (based on the mass of P-doped TiO₂) and k_A,BET=46.2×10⁻⁶ m/min (based on the BET surface area of P-doped TiO₂), which is superior to the performance of a commercial product, P25 (k_A,m=0.22 m³/(kg min) and k_A,BET=4.8×10⁻⁶ m/min).     

The influence of titanium on the properties of zinc oxide films deposited by radio frequency magnetron sputtering

TiO₂-doped zinc oxide thin films were deposited on glass substrates by radio frequency (RF) magnetron sputtering with TiO₂-doped ZnO targets in an argon atmosphere. The structural properties of TiO₂-doped ZnO films doped with different TiO₂ contents were investigated. The experimental results show that polycrystalline TiO₂-doped ZnO films had the (0 0 2) preferred orientation. The deposition parameters such as the working pressure and substrate temperature of TiO₂-doped ZnO films were also investigated. The crystalline structure of the TiO₂-doped ZnO films gradually improved as the working pressure was lowered and the substrate temperature was raised. The lowest electrical resistivity for the TiO₂-doped ZnO films was obtained when the Ti addition was 1.34 wt%; its value was 2.50 × 10⁻³ Ω cm, smaller than that found in previous studies. The transmittance of the TiO₂-doped ZnO films in the visible wavelength range was more than 80%. The optical energy gap was related to the carrier concentration, and was in the range of 3.30-3.48 eV.     

Sunlight photocatalytic activity of CdS modified TiO2 loaded on activated carbon fibers

To improve the photocatalytic application performances of TiO₂, in this work, firstly CdS modified Degussa P25 TiO₂ (CdS/TiO₂) composites were prepared by two methods, sol-gel method and precipitation method. Next they, sol-gel-CdS/TiO₂ (sg-CdS/TiO₂) and precipitation-CdS/TiO₂ (pp-CdS/TiO₂), were loaded on activated carbon fibers (ACFs) by dip-coating method using the sodium carboxymethyl cellulose as adhesives. The composites were characterized by XRD, UV-vis absorbance spectra, SEM, EDS and BET. The photocatalytic activities under sunlight were investigated by the degradation of methylene blue. The results showed that CdS/TiO₂ composites were mainly composed of anatase-TiO₂ and little CdS cubic phases. The absorption wavelengths of sg-CdS/TiO₂ and pp-CdS/TiO₂ composites were extended to 590 nm and 740 nm, respectively. The absorption edge had a pronounced ‘red shift’. From EDS analysis, the elemental contents of CdS/TiO₂ were mainly Ti and O and a small quantity of S and Cd. CdS/TiO₂ loaded on ACFs were in the form of small clusters, but not very uniform; compared with the original ACFs, the surface area and pore volume of CdS/TiO₂/ACFs decreased slightly, respectively, while the average pore diameter was not changed. The photodegradation rate of methylene blue under sunlight with CdS/TiO₂/ACFs composites was markedly higher than that of P25-TiO₂/ACFs, and the effect of pp-CdS/TiO₂/ACFs composites was better than that of sg-CdS/TiO₂/ACFs, when irradiated for 180 min, and the photodegradation rate of methylene blue reached to 90.1%. The photodegradation kinetics of the methylene blue fitted with the Langmuir-Hinshelwood equation. The apparent reaction rate constants of sg-CdS/TiO₂/ACFs and pp-CdS/TiO₂ were 0.0105 min⁻¹ and 0.0146 min⁻¹, respectively, which were about 1.3-1.7 times as large as that of P25-TiO₂/ACFs.     

Synthesis and characterization of polypyrrole/Sn-doped TiO2 nanocomposites (NCs) as a protective pigment

We have chemically polymerized pyrrole in the presence of Sn-doped TiO₂ nanoparticles (NPs) and TiO₂ (NPs) which act as a protective pigment. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) results show a core-shell structure of pigments in which TiO₂ and Sn-doped TiO₂ NPs have a nucleus effect and caused a homogenous PPy core-shell type morphology leading to coverage of the TiO₂ and Sn-doped TiO₂ NPs by PPy deposit. The XRD results indicate that the crystalline size of polypyrrole/TiO₂ NCs and polypyrrole/Sn-doped TiO₂ NCs were approximately 93.46 ± 0.06 and 23.36 ± 0.06 nm respectively. The electrochemical impedance spectroscopy (EIS) results show that the performance of polypyrrole/Sn-doped TiO₂ NCs is better than polypyrrole/TiO₂ NCs. The results indicate that increasing the area of synthesized polypyrrole in the presence of Sn-doped TiO₂ NPs can increase its ability to interact with the ions liberated during the corrosion reaction of steel in the presence of NaCl. The UV-vis results show that the band gap of TiO₂ NPs increases with doped of Sn in lattice of TiO₂. The increase of the band gap of TiO₂ with doping of Sn can decrease the charge transfer through the coating.     

Preparation of alkaline solid polymer electrolyte based on PVA-TiO2-KOH-H2O and its performance in Zn-Ni battery

A novel composite alkaline polymer electrolyte based on poly(vinyl alcohol) (PVA) polymer matrix, titanium dioxide (TiO₂) ceramic fillers, KOH, and H₂O was prepared by a solution casting method. The properties of PVA-TiO₂-KOH alkaline polymer electrolyte films were studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and AC impedance techniques. DSC and XRD results showed that the domain of amorphous region in the PVA polymer matrix augmented when TiO₂ filler was added. The SEM result showed that TiO₂ particles dispersed into the PVA matrix although some TiO₂ aggregates of several micrometers were formed. The alkaline polymer electrolyte showed excellent electrochemical properties. The room temperature (20 °C) ionic conductivity values of typical samples were between 0.102 and 0.171 S cm⁻¹. The Zn-Ni secondary battery with the alkaline polymer electrolyte PVA-TiO₂-KOH had excellent electrochemical property at the low charge-discharge rate.     

Photocatalytic behavior of heavy La-doped TiO2 films deposited by pulsed laser deposition using non-sintered target

We have investigated the control of photocatalytic behavior under deposited conditions of non-sintered target of different molar ratios with TiO₂ and La₂O₃ from 1:0 to 1:2 for heavily La doping, and post-annealing temperature from 600 °C to 1000 °C for crystallizing by pulsed laser deposition. We have successfully crystallized heavily La-doped TiO₂ films with post-annealing temperature over 800 °C and with molar ratio of TiO₂:La₂O₃ over 1:1 on a quartz substrate. Heavily La-doped TiO₂ films are observed the decomposition of methylene blue and a water-splitting reaction in photocatalytic behavior under Xe light irradiation. When stoichiometric La-doped TiO₂ (TiO₂:La₂O₃ = 1: 1) is synthesized with heat-treatment at 900 °C, the best results are obtained under photocatalytic behavior and pure La₂Ti₂O₇ crystalline were obtained.     

Influence of initial pH on the particle size and fluorescence properties of the nano scale Eu(III) doped yttria

Europium doped ytrrium oxide (Eu:Y₂O₃) was synthesized by a chemical wet method in the presence of tween-80 and ?-caprolactam in pH range 4-10. It has been observed that the variation in surface area, pore size, and pore volume of the final product, was strongly dependent on the initial pH of the solution. The powder with a large surface area (∼230 m²/g) and low pore diameter (∼16 nm) was obtained when the powder was processed at pH ∼4. The crystallite sizes of the powders processed at pH ∼4 and 10, were found to be 35 and 198 nm, respectively. The structural, chemical and thermal studies of the powders were characterized by X-ray diffraction (XRD), Fourier transformed infrared spectrophotometer (FTIR), Carbon analyzer and Thermogravimetry (TGA). High resolution transmission electron microscopic (HRTEM) study of heat treated powders showed a polygonal morphology with particle size of 40 nm when powder was derived at pH ∼4. Observations of fluorescence suggested that the ⁵D₀→⁷F₂ transition within europium was found to be highly dependent on the initial pH.     

Effect of structure on the photocatalytic activity of Pt-doped TiO2 nanotubes

Highly ordered TiO₂ nanotubes with different tube length were fabricated by anodization using C₂H₂O₄·2H₂O containing 0.5 wt.% NH₄F (electrolyte A) and anhydrous dimethyl sulfoxide containing 1% HF (electrolyte B), respectively. Then cathodic reduction method was used to dope Pt in TiO₂ nanotubes in chloroplatinic acid. The results indicated that cathodic reduction could efficiently platinize TiO₂ nanotubes. Pt-doped TiO₂ nanotubes with the longer length had the higher photocatalytic activity for degrading methyl orange under UV and visible irradiation. The longer tube length has a positive effect on the photocatalytic activity of Pt-doped TiO₂ nanotubes. Besides, as the content of anatase further decreases, the photocatalytic activity drops gradually due to the reduction reaction in the surface area.     

Preparation and characterization of iodine-doped mesoporous TiO2 by hydrothermal method

Iodine-doped mesoporous TiO₂ (I/TiO₂) was prepared by hydrothermal method, using tetrabutyl titanate as precursor, potassium iodate as iodine sources. The as-prepared I/TiO₂ catalysts were characterized by UV-vis, XRD, TEM, BET, TG/DTA, XPS and photoluminescence (PL) spectroscopy. Production of OH radicals on the I/TiO₂ surface was detected by the PL technique using terephthalic acid as a probe molecule. The effects of hydrothermal reaction temperature, calcination temperature and iodine doping content on the structure and properties of the catalysts were investigated. The results showed that iodine-doped TiO₂ calcinated at 300 °C have good anatase crystal. The optimal hydrothermal conditions have been determined to be that reaction temperature 120 °C, calcinated temperature 300 °C and added 1.16 mmol iodine dopants. The average particle size of I/TiO₂ synthesized under optimal condition (I-3 sample) is about 3.9 nm. The I-3 photocatalyst contains 100% anatase crystalline phase of TiO₂. BET specific surface area of I-3 sample is184.8 m² g⁻¹ and is 3.67 times that of pure TiO₂ (50.37 m² g⁻¹). Iodine in I/TiO₂ catalyst mainly exists in the form of I₂, and photoactivity of I/TiO₂ catalyst in visible light comes from photosensitize of I₂. I/TiO₂ catalysis shows very high efficiency for the degradation of phenol under visible light.     

Preparation of continuous TiO2 fibers by sol-gel method and its photocatalytic degradation on formaldehyde

The continuous TiO₂ fibers were prepared by sol-gel method using the tetrabutyl orthotitanate as the precursor. The sol-formation process is studied by FT-IR spectroscopy. The synthesized continuous TiO₂ fibers were characterized using SEM, HRTEM and XRD. Results demonstrate that the titanate sol has good spinnability when R ≤ 2 (R = H₂O:Ti(OC₄H₉)₄, molar ratio). The fibers have the length of several meters and the diameter of about 30 μm. The fibers are a radial close-packed product of nano-particles with high crystallinity. The continuous TiO₂ fibers are co-crystal including anatase phase and rutile phase. The formaldehyde degradation ratio of continuous TiO₂ fiber was 98.6%.     

Preparation of transparent conductive TiO2:Nb thin films by pulsed laser deposition

This study investigated the optical and electrical properties of Nb-doped TiO₂ thin films prepared by pulsed laser deposition (PLD). The PLD conditions were optimized to fabricate Nb-doped TiO₂ thin films with an improved electrical conductivity and crystalline structure. XRD analyses revealed that the deposition at room temperature in 0.92 Pa O₂ was suitable to produce anatase-type TiO₂. A Nb-doped TiO₂ thin film attained a resistivity as low as 6.7 × 10⁻⁴ Ω cm after annealing at 350 °C in vacuum (<10⁻⁵ Pa), thereby maintaining the transmittance as high as 60% in the UV-vis region.     

Physico-chemical properties and possible photocatalytic applications of titanate nanotubes synthesized via hydrothermal method

Titanate nanotubes (TNTs) were prepared from TiO₂ P25 via hydrothermal method. The reaction temperature was 130 or 140 °C and the reaction time was 24 or 48 h. The samples were characterized by transmission electron microscopy, X-ray diffraction, thermogravimetry and N₂ adsorption as well as Raman, FTIR-DRS and UV-vis/DR spectroscopy. The obtained samples exhibited similar properties, regardless of the preparation temperature and time. The most notable difference between properties of TNTs prepared under different conditions was observed in case of BET surface area, which was increasing from 386 to 478 m²/g along with increasing the reaction time and temperature. Based on TEM, XRD and TG measurements we have suggested that the structure of TNTs was H₂Ti₂O₄(OH)₂. The TEM and Raman spectroscopy measurements showed that the obtained products contained also low amount of anatase phase. The TNTs exhibited no photoactivity towards degradation of model azo dye Acid Red 18. However, TNTs were successfully applied for photocatalytic generation of CH₄ and H₂ in a solution of acetic acid. The amount of methane produced with application of TNTs synthesized at 140 °C was about 2.5 times higher than that generated with use of TiO₂ P25. To the best of our knowledge this is a first report on the photocatalytic generation of hydrocarbons using TNTs in the current state of the art.     

Preparation, characterization of Au (or Pt)-loaded titania nanotubes and their photocatalytic activities for degradation of methyl orange

TiO₂ nanotubes were prepared by hydrothermal method and Au (or Pt) was loaded on TiO₂ nanotubes by photodeposition method. The photocatalysts were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and N₂ adsorption technique, respectively. The photocatalytic properties of the samples were also investigated. The results show that TiO₂ nanotubes with uniform diameter were prepared, and they have specific surface areas over 400 m²/g. The specific surface areas of TiO₂ nanotubes decrease with the increasing of calcining temperature, and crystalline phase of TiO₂ in the wall of nanotubes was transformed from anatase into rutile phase in calcination process. The photocatalytic activities of TiO₂ nanotubes are higher than that of nanosized TiO₂, and the photocatalytic activities of TiO₂ nanotubes were enhanced after loading Au (or Pt). After irradiation for 40 min under a 300 W of middle-pressure mercury lamp (MPML), the degradation rate of methyl orange solution using the Au/TiNT-500 (or Pt/TiNT-500) as a catalyst can reach 96.1% (or 95.1%). On the other hand, Au-loaded sample has evident adsorption peak in visible range, indicating that Au-loaded TiO₂ nanotubes are hopeful to become visible light photocatalyst.