Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection–CZE (FASI–CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of –10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25–10.0 times, and the LODs were reduced from 0.2–0.5 to 0.02–0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59–106.59%. The intraday and interday precisions were 2.89–7.35% and 2.77–7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.     

Trends in the detection of pharmaceuticals and endocrine-disrupting compounds by Field-Effect Transistors (FETs)

Field-effect transistors (FETs) are one of the most widely-used electronic sensors for continuous monitoring and detection of contaminants such as pharmaceuticals and endocrine-disrupting compounds at low concentrations. FETs have been successfully utilized for the rapid analysis of these environmental pollutants due to their advantageous material properties like the disposability, rapid responses and simplicity. This paper presented an up-to-date overview of applied strategies with different bio-based materials in order to enhance the analytical performances of the designed sensors. Comparison and discussion were made between characteristics of recently engineered FET bio-sensors used for the detection of famous and selected pharmaceutical compounds in the literature. The recent progress in environmental research applications, comments on interesting trends, current challenge for future research in endocrine-disrupting chemicals’ (EDCs) detection using FETs biosensors were highlighted.     

Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

Intrinsic Fluorescence of Actin

In this work actin is used to illustrate connection of protein fluorescence characteristics with its structure. On one hand, it has been demonstrated what kind of information about the contribution of each tryptophan residues to the bulk fluorescence spectrum can be obtained from the special analysis of protein three-dimensional structure. On the other hand, potentials of intrinsic fluorescence for elucidation of proteins structure, dynamics and processes of folding-unfolding are shown. In particular, using this method a new essentially unfolded kinetic intermediate state of actin was detected and characterized, and the place of inactivated actin and its kinetic predecessor in the process of folding-unfolding was determined. It has been revealed that inactivated actin is not intermediate state between the native and completely unfolded states, as it has been accepted before, but a result of protein misfolding. On the basis of the obtained data a new model of actin folding-unfolding pathway has been proposed.     

Gas chromatographic trace analysis of underivatized nitrophenols

Summary A method for the gas chromatographic trace analysis of underivatized nitrophenols in ground-water is presented. Using a highly de-activated separation system a satisfactory precision for their quantitative GC analysis could be achieved by avoiding condensation of the solvent and by fast injection of the sample. The reproducibility of the peak areas of eleven nitrophenols in ethylacetate was <5 % RSD. Using a nitrogen-phosphorus detector detection limits were in a range from 10 to 30 pg. Within the concentration range from 0.1 to 10 ng μl⁻¹ the calibrations were linear with correlation coefficients >0.992. The approach described was applied to the analysis of nitrophenols in ground-water near a former ammunition plant, after preconcentration by continuous liquid/liquid extraction with ethylacetate. Using a GC-MS technique and retention times various nitrophenols were identified and then quantified in the μg/L-range by applying NPD.     

Supercritical fluid chromatography of industrial paraffins and waxes

Summary The application of capillary SFC for SIMDIST investigations of paraffins and waxes is reported. Pressure, density and temperature of the mobile phase are optimized to obtain high chromatographic resolution of complex mixtures of industrial products. Isothermal linear pressure programming and asymptotic pressure and density programming are used in the range from 15 to 35 MPa in the isothermic mode above 100°C. SFC chromatograms of natural and synthetic paraffins, microcrystalline wax and candle wax are compared. The retention behaviour of paraffin mixtures and waxes has been investigated on methyl/phenyl and biphenyl capillary columns. The polarity of the stationary phases influences the absolute retention time more than it influences the chromatographic resolution.     

Determination of Organochlorine Pesticides in Sediments from Authie Bay Using Microwave Assisted Solvent Extraction

The aim of this study was to develop an analytical method to determine the organochlorine concentrations in sediments. Combination of Microwave assisted Solvent Extraction (MASE) and capillary gas chromatography with specific detection (electron capture detector) was a viable approach for the determination of pesticides in solid matrixes. In this study, MASE development was focused on the selection of a suitable extraction solvent for all the target analytes. MASE procedure was validated by comparison with conventional methods such as Soxhlet and sonication extraction. The proposed method was then applied to determine the organochlorine insecticides concentrations in samples from Authie Bay (France). Environmental water samples were analysed and five target analytes were detected in concentrations from 0.03 to 0.56 ng/g of dry sediment. These investigations showed the accumulation and the persistency of these products in sediments in spite of the fact they were banned a few decades ago.     

Evaluation of the aerobic composting process of winery and distillery residues by thermal methods

The possibility of using thermal analysis for a quick characterization of chemical changes was tested in the organic matter from composting materials. Differential thermal analysis (DTA), thermogravimetry (TG) and the first derivative of the TG (DTG) were calculated in oxidizing conditions on compost samples obtained from three composting piles. The composting piles were made by mixing winery and distillery residues with sewage sludge (pile 1), with cow manure (pile 2) and hen droppings (pile 3). The temperature values in the pile 1 showed a different evolution during the thermophilic stage of the composting process in relation to the piles 2 and 3. The thermophilic stage for pile 1 was 17 days, meanwhile for the piles 2 and 3 were around 80 and 110 days, respectively, and probably pile 1 was not well composted. The curves of ion current of CO₂ have been recorded in order to shed light on changes occurring in organic matter during composting. Particularly DTG curves allowed us to distinguish between well (piles 2 and 3) and poor (pile 1) stabilized organic matter. The energy released was calculated for each sample by integrating the DTA curves and these results are agreed with the previous hypothesis. Information deriving from weight losses, registered by the TG and DTG curves, enables to follow the evolution state of the organic matter and therefore changes in its stability. These data could determine the final point of the composting process of winery and distillery residues and then reduce the time for compost harvest.     

Composting of urban solid residues (USR) by different dispositions

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, Săo Paulo state, Brazil, within a period of 132 days of composting were studied. Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis. The values obtained were: average activation energy, Ea=248, 257 and 259 kJ mol^-1 and pre- exponential factor, logA=21.4, 22.5, 22.7 min^-1, to the ST, SR and SM, respectively. From Ea and logA values and DSC curves, Málek procedure could be applied, suggesting that the SB (Šesták-Berggren) kinetic model is the appropriated one to the first thermal decomposition step. This revised version was published online in July 2006 with corrections to the Cover Date.     

高效液相色谱-柱后衍生和质谱联用测定大米中氨基甲酸酯类农药残留量

研究了高效液相色谱-柱后衍生荧光检测和液质联用分别测定大米中14种和16种氨基甲酸酯类农药残留量的方法.二氯甲烷和丙酮的混和溶剂提取后,用柱后衍生荧光检测法和离子阱多级质谱联用法进行测定.柱后衍生荧光检测法检出限为20～50 μg/kg,离子阱多级质谱联用法检出限为10～20 μg/kg,添加平均回收率在70%～92%之间,RSD%在6.7%～12%.