一种高性能小周期摇摆器

介绍一种高性能小周期摇摆器的设计。采用槽型定位的分离状磁块,实现了磁场的半周期调节,对该摇摆器模型进行的测量表明,当摇摆器的周期λ_w=10mm,磁极间隙δ为5mm时,峰值磁场B_w=0.35T,磁场最大偏差δB_w/B_w<1.25％。     

红黑排序混合算法收敛速度分析

The algorithm of applying the block Gauss elimination to the Red-Black or-dering matrix to reduce the order of the system then solve the reduced system byiterative methods is called Hybrid Red-Black Ordering algorithm.In this paper,we discuss the convergence rate of the hybrid methods combined with JACOBI,CG,GMRES(m).Theoretical analysis shows that without preconditioner thesethree hybrid methods converge about 2 times as fast as the corresponding natural ordering methods.For the case that all the eigenvalues is near the real axis, the GMRES(m) algorithm converges about 3 times faster than the natural ordering GMRES(m).Various numerical experiments are presented.For large scale prob-lem with preconditioners, numerical experiments show that the GMRES(m) hybrid methods converge from about 3 times to even 5 times as fast as the natural order-ing methods and the computing time is reduced to about 1/3 even 1/6 of that of the natural ordering methods.     

用序列二次规划法设计ICF 靶区光路

 运用序列二次规划法设计了靶区光路。由ICF 柱面靶间接驱动实验对多路激光束排布的要求, 建立靶区数学模型, 用本文设计结果构筑光路排布线框实体。该三维线框以特征线代表60路激光驱动光束实体, 以特征线段的转折点代表240面反射镜的空间位置。     

焊缝缺陷的电子散斑现场检测技术研究

本文用电子散斑干涉及剪切电子散斑干涉技术(ESPI/SESPI)实现了薄壁旋转壳及球形压力容器焊缝缺陷的现场实时检测,给出了实际压力容器焊缝缺陷的无损检测结果与理论分析;将ESPI系统与旋转椭球曲面反射镜检测装置结合,获得了被测容器焊缝360°全方位准确成象及ESPI全场缺陷检测;通过预制缺陷的ESPI、SESPI无损检测与理论计算,完成了孔洞型缺陷与裂纹型缺陷的变形与梯度分析.     

等离子体全息干涉条纹的数据处理

本文介绍了用全息干涉法诊断爆炸丝等离子体的数据处理方法。在考虑等离子体区域为轴对称的情况下,给出了由折射率计算等离子体电子密度的计算公式。在爆炸丝能量为9.6J的情况下,拍摄到了延时3μs的爆炸丝等离子体干涉图。运用计算机图象处理技术对反拍后的干涉图进行了处理,获得了较为理想的干涉图。用微机控制的线阵CCD摄像机判读了干涉条纹漂移。给出了等离子体密度随径向分布的曲线,并得到相应的等离子体密度在中心处约为10¹⁶个/cm³。     

光电倍增管脉冲性能研究

采用外腔式电光开光,调制主动照相探测光源,使光电倍增管处于脉冲工作状态下,以提高光电倍增管的输出幅度和动态范围,改善信号的信噪比,同时避免样品和探测器受长时间强激光照射.对滨松H6780光电倍增管进行了调试,使其线性输出电流由静态的0.1mA提升到脉冲状态的4.4mA,信噪比提高4.5倍.该技术对其他光敏探测有借鉴意义.     

爆炸磁压缩发生器爆炸管运动研究

 报导了对爆炸磁压缩发生器(MFCG)的爆炸管进行的爆轰试验结果。用电子学方法测试了爆炸管采用的粉状RDX炸药的爆轰速度;采用高速分幅摄影方法,观测了爆炸管在管内RDX炸药爆轰产物驱动下的膨胀运动过程,测试了膨胀角、对称性和膨胀速度。试验表明,爆炸管在膨胀至 3倍初始半径内未发现破裂现象,其性能满足MFCG的设计要求。     

Corkscrew振荡引起的发射度增长

 用解析方法来确定由二种因素引起的Corkscrew振荡所造成的归一发射度增长的表达式。这二种因素是电子束的非理想注入以及聚焦磁场相对于系统轴的随机偏斜。     

Experimental investigation of the relativistic backward wave oscillator with a periodic guiding magnetic field

Experiment is carried out on the accelerator Sinus-700 to investigate the Relativistic Backward Wave Oscillator （RBWO） with a periodic guiding magnetic field. When the strength of the guiding magnetic field, whose period is 4.6 cm, is 0.54 T, a microwave output power of 0.95 GW at 9.1 GHz microwave frequency is achieved. It is shown that the RBWO with a periodic guiding magnetic field is feasible.     

First experimental research of the bunch compressor at CAEP

Magnetic bunch compressor is one of the key technologies on the path to next generation accelerator driven facilities. In this paper we report the design principles and the first experimental research of the bunch compressor developed at Chinese Academy of Engineering Physics （CAEP）. The length of the bunch after compressor is found to be about 0.7 ps （rms） and the peak current exceeds 500 A when operated in the optimized condition. The sensitivity of the bunch length on the phase of the acceleration field and magnetic field of the bunch compressor was also measured and analyzed.