自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

单晶金刚石p型和n型掺杂的研究

超宽禁带半导体材料金刚石在热导率、载流子迁移率和击穿场强等方面表现出优异的性质,在功率电子学领域具有广阔的应用前景。实现p型和n型导电是制备金刚石半导体器件的基础要求,其中p型金刚石的发展较为成熟,主流的掺杂元素是硼,但在高掺杂时存在空穴迁移率迅速下降的问题;n型金刚石目前主流的掺杂元素是磷,还存在杂质能级深、电离能较大的问题,以及掺杂之后金刚石晶体中的缺陷造成载流子浓度和迁移率都比较低,电阻率难以达到器件的要求。因此制备高质量的p型和n型金刚石成为研究者关注的焦点。本文主要介绍金刚石独特的物理性质,概述化学气相沉积法和离子注入法实现金刚石掺杂的基本原理和参数指标,进而回顾两种方法进行单晶金刚石薄膜p型和n型掺杂的研究进展,系统总结了其面临的问题并对未来方向进行了展望。     

FeOOH Nanocubes Anchored on Carbon Ribbons for Use in Li/O2 Batteries

A composite of FeOOH nanocubes anchored on carbon ribbons has been synthesized and used as a cathode material for Li/O₂ batteries. Fe²⁺ ion-exchanged resin serves as a precursor for both FeOOH nanocubes and carbon ribbons, which are formed simultaneously. The as-prepared FeOOH cubes are proposed to have a core–shell structure, with FeOOH as the shell and Prussian blue as the core, based on information from XPS, TEM, and EDS mapping. As a cathode material for Li/O₂ batteries, FeOOH delivers a specific capacity of 14816 mA h g⁻¹_cathode with a cycling stability of 67 cycles over 400 h. The high performance is related to the low overpotential of the oxygen reduction/evolution reaction on FeOOH. The cube structure, the supporting carbon ribbons, and the -OOH moieties all contribute to the low overpotential. The discharge product Li₂O₂ can be efficiently decomposed in the FeOOH cathode after a charging process, leading to higher cycling stability. Its high activity and stability make FeOOH a good candidate for use in non-aqueous Li/O₂ batteries.     

Zn or O? An Atomic Level Comparison on Antibacterial Activities of Zinc Oxides

For the first time, the influence of different types of atoms (Zn and O) on the antibacterial activities of nanosized ZnO was quantitatively evaluated with the aid of a 3D‐printing‐manufactured evaluation system. Two different outermost atomic layers were manufactured separately by using an ALD (atomic layer deposition) method. Interestingly, we found that each outermost atomic layer exhibited certain differences against gram‐positive or gram‐negative bacterial species. Zinc atoms as outermost layer (ZnO?Zn) showed a more pronounced antibacterial effect towards gram‐negative E. coli (Escherichia coli), whereas oxygen atoms (ZnO?O) showed a stronger antibacterial activity against gram‐positive S. aureus (Staphylococcus aureus). A possible antibacterial mechanism has been comprehensively discussed from different perspectives, including Zn²⁺ concentrations, oxygen vacancies, photocatalytic activities and the DNA structural characteristics of different bacterial species.     

废旧隔膜衍生碳负极的电化学储锂性能

以废隔膜为前体,通过一步热解碳化制备碳负极材料,考察了温度和时间对碳化产物的影响,并研究了碳负极材料的电化学储锂性能.结果 表明,废隔膜的最佳碳化温度为420℃,碳化时间为120 min;用作锂离子电池负极材料时,在50 mA/g低电流密度充/放电时的可逆放电比容量高达543.8 mAh/g;即使在高电流密度2000 mA/g循环1000圈后,可逆放电比容量仍可稳定在125.0 mAh/g左右,表现了良好的电化学储锂性能.该研究结果不仅有助于缓解废旧隔膜对环境产生的危害,而且能充分发挥废弃资源中的利用价值、降低电极材料的制备成本.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

Suppressing Strong Exciton–Phonon Coupling in Blue Perovskite Nanoplatelet Solids by Binary Systems

Quasi-two-dimensional (2D) perovskites are promising candidates for light generation owing to their high radiative rates. However, strong exciton–phonon interactions caused by mechanical softening of the surface act as a bottleneck in improving their suitability for a wide range of lighting and display applications. Moreover, it is not easily available to tune the phonon interactions in bulk films. Here, we adopt bottom-up fabricated blue emissive perovskite nanoplatelets (NPLs) as model systems to elucidate and as well as tune the phonon interactions via engineering of binary NPL solids. By optimizing component domains, the phonon coupling strength can be reduced by a factor of 2 driven by the delocalization of 2D excitons in out-of-plane orientations. It shows the picosecond energy transfer originated from the Förster resonance energy transfer (FRET) efficiently competes with the exciton–phonon interactions in the binary system.     

Synthesis,characterization, DNA binding,cytotoxicity and molecular docking properties of three novel butterfly-like complexes with nitrogen-containing heterocyclic ligands

Three novel complexes, namely [Nd·L₁·HCOO·(H₂O)₄] ( 1 ), [Pr·L₁·HCOO·(H₂O)₄] ( 2 ) and [In·L₂·Cl·(H₂O)₂] ( 3 ) (L₁ = 1,1-bis(5-(pyrazin-2-yl)-1,2,4-triazol-3-yl)methane, L₂ = 1,1-bis(5-(pyrazin-2-yl)-1,2,4-triazol-3-yl)ketone), were synthesized and characterized. The molecular structures of 1 – 3 were confirmed using single-crystal X-ray diffraction. All three obtained complexes are zero-dimensional and connected to each other by hydrogen bonds. In 1 and 2 the metal is surrounded by nine donors and 3 has seven coordination sites. The interaction of 1 – 3 with calf thymus DNA (CT-DNA) was explored using UV absorption spectra and fluorescence spectra. The intrinsic binding constants of 1 – 3 with CT-DNA are about 1.9 × 10⁴, 1.4 × 10⁴ and 1.1 × 10⁴, respectively. Stern–Volmer quenching plots of 1 – 3 have slopes of 0.1508, 0.134 and 0.1205, respectively. The ability of these complexes to cleave pBR322 plasmid DNA was demonstrated using gel electrophoresis assay. Apoptosis studies of the three novel complexes showed a significant inhibitory effect on HeLa cells. Furthermore, MTT assays were used to evaluate the anticancer activity of the three complexes. The cytotoxicity study indicated that complex 1 possesses a higher inhibitory rate of HeLa cells than the other complexes. Especially, the efficacy of 1 was shown to be the highest for cisplatin at 24 h. A further molecular docking technique was introduced to understand the binding of the complexes toward the target DNA.     

A novel combining strategy of cellulose aerogel and hierarchically porous metal organic frameworks (HP-MOFs) to improve the CO2 absorption performance

Cellulose - High CO2 concentration in atmosphere causes serious environmental issues, and carbon capture and storage technologies have attracted attention as a means to reduce the atmospheric CO2...