MCNOs/CdS双效光催化剂的制备及其性能研究

水热合成法制备了不同磁性纳米洋葱碳(MCNOs)负载量(0%、1%、3%、5%)的MCNOs/CdS光催化剂。并通过X射线衍射分析(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)、紫外可见光光谱(UV-Vis)、磁滞回线测定仪(VSM)对其进行表征,探究了MCNOs负载比例对催化剂在可见光下降解RhB性能及机理的影响。结果表明,MCNOs能有效提高CdS的光催化效果,复合3%MCNOs后降解率为96%,与纯CdS相比降解率提高了30%,磁性分析表明,其具有良好的顺磁性并能实现催化剂的有效回收。MCNOs/CdS在可见光下催化降解RhB的一级反应动力学直线有较好的拟合度,表明制备的催化剂有较好的催化活性。     

极大3限制边连通二部图的充分条件

设G=(V,E)是一个连通图.称一个边集合S■E是一个k限制边割,如果G-S的每个连通分支至少有k个顶点.称G的所有k限制边割中所含边数最少的边割的基数为G的k限制边连通度,记为λ_k(G).定义ξ_k(G)=min{[X,■]:|X|=k,G[X]连通,■=V(G)\X}.称图G是极大k限制边连通的,如果λ_k(G)=ξ_k(G).本文给出了围长为g>6的极大3限制边连通二部图的充分条件.     

Raman Scattering Study of Natural and Synthetic Compounds Containing Polyene Chains

Doklady Physics - The dependence of Raman spectra of the molecules containing polyene chains on the conjugation length, structure of side and end groups, and isomer type is analyzed theoretically.     

A Modular Peel Fixture for Tape Peel Tests on Immovable Substrates

Background

Peel tests are frequently used to perform measurements of adhesive strength for pressure sensitive adhesive (PSA) tapes. Current lab methodologies for 90° peel tests translate the model substrate orthogonally to the peel direction in order to maintain the peel angle, precluding testing from immovable substrates.

Objective

It was our objective to develop a peel fixture capable of testing temporary pavement marking (TPM) tapes and other PSA tapes from immovable substrates such as roadways surfaces.

Methods

We present a modular peel fixture for conducting peel experiments directly on immovable substrates. The fixture was validated through a series of peel tests on consumer tapes to reproduce the linear width dependence and viscoelastic rate dependence found in traditional peeling setups. To test the capabilities of the fixture, a series of peel tests were conducted with various tapes on controlled surfaces, and a commercial tape on various immovable substrates.

Results

We demonstrate the ability of our fixture to reproduce results reported for traditional peel tests from literature. In addition, we were able to conduct peel tests directly on immovable substrates such as the benchtop.

Conclusions

This fixture shows potential for both traditional peeling tests, and for use in in-situ peel experiments from substrates relevant to the end application of the PSA tape.

     

A higher-order parametric nonlinear reduced-order model for imperfect structures using Neumann expansion

Nonlinear Dynamics - We present an enhanced version of the parametric nonlinear reduced-order model for shape imperfections in structural dynamics we studied in a previous work. In this model, the...     

污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

基于级联PPMgLN晶体的双倍/三倍频双波长激光器

本文演示了紧凑的绿色和近红外双色连续波激光光源,其发射波长分别为516 nm和775 nm。设计并制造了级联的周期性极化掺镁铌酸锂晶体,用于同时转换通信波长的二次谐波(SHG)和三次谐波(THG),可以在相同温度下获得绿色和近红外激光的输出。通过建立一个单程激光测量系统,在2 W泵浦功率下获得516 nm的0.15 mW绿光和775 nm的1.19 mW的光,晶体温度控制在30.8 ℃。实验结果将为单激光器泵浦的紧凑型双波长共线激光器提供重要的案例。     

Superquantiles at Work: Machine Learning Applications and Efficient Subgradient Computation

Set-Valued and Variational Analysis - R. Tyrell Rockafellar and his collaborators introduced, in a series of works, new regression modeling methods based on the notion of superquantile (or...     

Electron energy spectrum in the field-ionized plasma

In this article, the effect of ionization on the energy spectrum of electrons within the interaction of a laser pulse with hydrogen atoms is investigated using particle-in-cell simulation codes. The results show that the behaviour of electrons' energy distribution function in the field-ionized plasma, which occurred due to the field ionization, compared with that in the pre-plasma strongly depends on the pulse shape. For short rise-time pulses (here 30 fs), due to the rapid enhancement of laser electric field, ionization occurs quickly, and as a result, there is not much difference in the electron energy in both the media. However, for pulses with rise time of 40 fs, in the pre-plasma state, the electron population reaches higher energies compared with the field-ionized plasma state. The main reason for this difference is the nonlinear wave breaking that happens earlier due to density inhomogeneity in the field-ionized plasma. On the other hand, at longer rise-time pulses (here 60 and 70 fs), electrons achieve higher energies in the field-ionized plasma than those in the case of pre-plasma. In this case, because of density fluctuations in the field-ionized plasma, the Raman backscattered radiations are seeded by a strong initial noise at the earlier times and the Mendonca condition for chaos threshold is met sooner. Therefore, the electrons gain more energy through the stochastic mechanism that is in agreement with chaotic nature of the motion.     

Investigation of Relationships between Grain Structure and Inhomogeneous Deformation by Means of Laboratory-Based Multimodal X-Ray Tomography: Strain Accuracy Analysis

Experimental Mechanics - The internal strain distribution developing during plastic deformation is important for understanding the mechanical properties of polycrystalline materials. Such...