Design and exploration of 5-nitro-3-trinitromethyl-1H-1,2,4-triazole and its derivatives as energetic materials

Molecular Diversity - According to the fact that 5-nitro-3-trinitromethyl-1H-1,2,4 triazole (NTNMT) is a successful, good explosive, energetic groups such as –CH3, –NH2, –NHNO2,...     

The ferroelectric and ferromagnetic characterization of CoFe2O4/Pb(Mg1/3Nb2/3)O3-PbTiO3 multilayered thin films

The multiferroic (PMN-PT/CFO)_n (n = 1,2) multilayered thin films have been prepared on SiO₂/Si(1 0 0) substrate with LNO as buffer layer via a rf magnetron sputtering method. The structure and surface morphology of multilayered thin films were determined by X-ray diffraction (XRD) and atom force microscopy (AFM), respectively. The smooth, dense and crack-free surface shows the excellent crystal quality with root-mean-square (RMS) roughness only 2.9 nm, and average grain size of CFO thin films on the surface is about 44 nm. The influence of the thin films thickness size, periodicity n and crystallite orientation on their properties including ferroelectric, ferromagnetic properties in the (PMN-PT/CFO)_n multilayered thin films were investigated. For multilayered thin films with n = 1 and n = 2, the remanent polarization Pr are 17.9 μC/cm² and 9.9 μC/cm²; the coercivity H_c are 1044 Oe and 660 Oe, respectively. In addition, the relative mechanism are also discussed.     

非线性元件频率响应

用示波器观测4种二极管对交流信号的响应.为了理解响应图形的含义,对响应信号做了Fourier变换,使学生认识到非线性元件对输入信号能产生高次谐波,即产生倍频和多倍频.在非线性伏安特性测量实验中增加了上述内容,激发了学生的学习兴趣.     

液相色谱-串联质谱法检测动物源性食品中激素残留所遇到问题的探讨

探讨了液相色谱-串联质谱法用于动物源性食品中激素残留检测时关于样品的提取与净化、酶解、基质效应和激素来源等问题(引用文献29篇)。     

评审专家随机抽取过程中的均衡性改善方法

对现有评审专家随机抽取方法存在的问题,分析了专家抽取不均衡的产生原因,提出了一种改进的抽取方法.该新方法在抽取过程中考虑了评审专家前期的抽取次数,在保证随机性的同时,提高了抽取次数较少专家的抽中概率.文中定量分析了该方法对抽取结果均衡性的改善效果.     

-196℃奥氏体不锈钢母材与焊缝的动态断裂韧性

在-196 ℃对S30408奥氏体不锈钢的母材和焊缝进行了夏比摆锤冲击实验,采用改进的柔度变化率法得到了低温下不锈钢母材夏比试样的起裂点。结果表明,采用改进的柔度变化率法得到的结果比采用传统的柔度变化率法得到的结果更准确。根据实验得到的载荷-位移曲线,结合采用Schindler法和关键曲线法各自所得结果的优点,得到了不锈钢母材的动态裂纹扩展阻力曲线（动态J-R曲线）。依据不锈钢焊缝在低温动载下的载荷-位移曲线及其断裂特征,通过线弹性断裂力学计算获得其动态断裂韧性。     

多巴胺改性UHMWPE粉末对环氧涂层韧性及摩擦性能的影响

利用多巴胺氧化自聚合性质改性超高分子量聚乙烯(UHMWPE)粉末惰性表面,制备得到改性粉末,并添加于环氧树脂中制备成耐磨环氧涂层,同时与添加未改性UHMWPE粉末的环氧涂层对比.采用扫描电镜(SEM)、X射线光电子能谱(XPS)和红外光谱(IR)表征改性粉末表面形貌和化学元素状态,利用摩擦磨损试验机测试环氧涂层表面的摩擦系数和磨损率.结果表明:改性粉末表面黏附1层含极性基团的聚多巴胺,能够与环氧树脂发生反应而固化在涂层中,相容性增强.改性粉末表面O,C元素相对含量比较O/C和N/C值随改性时间延长而增大,在5 h时趋于稳定.当改性粉末添加量从6.7%增至20%时,环氧涂层的抗冲击性能增强,摩擦系数和磨损率随之降低,改善了涂层的摩擦学性能,而且效果优于添加未改性粉末的涂层.     

The Influence of Temperature on Ethene Diffusion in H[Al]ZSM-5 Studied by Molecular Dynamics

Molecular dynamics(MD) simulation of ethene diffusion in the lattice of H[Al]ZSM-5 was performed at the temperature ranging from 300 K to 700 K. The calculated diffusion coefficients increase with the temperature from 2.60×10-9 m2/s at 300 K to 12.78×10-9 m2/s at 700 K. The Arrhenius plot gives an activation energy of 6.31 kJ/mol. The anisotropy of the diffusion process was examined.     

通过磁化曲线计算磁熵值

在恒定低磁场下测量磁性物质的M T 曲线,可以确定其居里点;在居里点附近测量一系列等温磁化曲线M H,根据磁化曲线并借助于磁系统的热力学关系式,通过数值计算方法得到磁性材料在施加或撤去外磁场过程中的磁熵变化值.