Constraint on a New Short-Range Spin—Orbit Interaction from Neutron Diffraction Data for a Noncentrosymmetric Crystal

JETP Letters - A constraint $$g_{A}^{2}\leq 4.5\times10^{-24}\big(g^{2}+1/\lambda_{A}^{2}\big)$$ on the constant gA of a new short-range (spin—orbit) interaction between nucleons, which is...     

Study of incident shock interaction with a two-dimensional boundary layer

This paper presents the results of an experimental study of a boundary layer disturbed by an incident shock for parameters which are characteristic of problems for flow about blade profiles in the final stages of high-power steam turbines.     

单矢量水听器估计目标方位的方法与实验

为评估基于单矢量水听器的方位估计能力,在黄海海域对矢量水听器进行实验。矢量水听器吊放于接收船尾部,采用平均声强器和复声强器方位估计方法,并提出以概率密度值最大的方位角作为目标方位估计值的具体处理准则,对恒定方向、匀速行驶的目标船方位进行估计,并求出两种方法的方位估计误差。结果表明,水听器布放深度10 m时,对正横距离为0.42 km的航速10 kn的目标船,平均声强器方法的水平方位角估计误差18°,极角估计误差为5°,可以在离目标船最远1.17 km处估计其方位;复声强法的水平方位角估计误差为13°,极角估计误差为8°,可以在离目标船最远2.35 km处估计其方位。在有接收船的噪声干扰情况下,复声强器比平均声强器方法估计的方位更准确,可以对更远处的噪声源进行方位估计。     

基于纯方位的浅海距离特征量解算分析

目标辐射噪声的LOFAR图中的干涉条纹包含了目标的运动参数和环境信息。当LOFAR图中的干涉条纹模糊或缺失时,其中的目标距离信息将无法提取。对于匀速直线运动的声源目标,仅利用方位信息,通过构造距离特征量和目标方位的关系模型,给出了一种浅海估计距离特征量的补充方法。浅海数值仿真和实验验证表明了该方法的可行性和有效性。     

Boundary layer and heat transfer in a two-phase gas-evaporating droplet medium

An asymptotic model of the flow in the laminar boundary layer of a gas-evaporating droplet mixture is constructed within the framework of the two-continuum approximation. The case of evaporation of the droplets into an atmosphere of their own vapor is examined in detail with reference to the example of longitudinal flow over a hot flat plate. Numerical and asymptotic solutions of the boundary layer equations constructed are found for a number of limiting situations (low droplet concentration, no droplet deposition, significant droplet deposition). The development of the flow with respect to the longitudinal coordinate is studied and it is shown that in the absence of droplet deposition a region of pure vapor may be formed near the surface. Similarity criteria are established and the mechanism of surface heat transfer enhancement is studied for a low evaporating droplet concentration in the boundary layer. In the inertial deposition regime the results of calculating the integral heat transfer coefficient are found to correspond with the experimental data [1].Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.3, pp. 42–50, May–June, 1992.     

Capillary end effect in a water saturated porous layer

The uni-directional propagation of oil injected into water flowing through a water wetted porous slab of a finite length is investigated. The inlet and outlet edges of the slab are impermeable to the oil flux. Hence, the oil accumulates within the slab, thereby leading to a saturation build-up-capillary end effect. This phenomenon is studied analytically on the basis of a nonlinear equation describing oil-water transport in porous media. A dimensionless criterion is derived, which governs the appearance and relative strength of the capillary end effect. For weak oil-water interfacial tension (large capillary number) and long porous slabs the above effect is not observed and the temporal evolution of the oil saturation is described by the Buckley-Leverett solution. Short porous slabs are found to be almost entirely subjected to the capillary end effect. Intermediate situations are identified and quantitatively described, in which the downstream part of the slab may be divided into two zones: one-characterized by the capillary end effect, and the other being a Buckley-Leverett zone.It is shown, that the oil flux injected into the slab is limited by a maximum value which depends upon the location of the injection point. The partition of the inlet flux between the upstream and downstream directions is investigated. In the upstream side of the porous slab the oil moves under the action of free imbibition only. It is found that the upstream flux is limited by the value, which is independent of the slab's length and of the location of the injection point.     

Simulations of Microbial-Enhanced Oil Recovery: Adsorption and Filtration

In the context of microbial-enhanced oil recovery (MEOR) with injection of surfactant-producing bacteria into the reservoir, different types of bacteria attachment and growth scenarios are studied using a 1D simulator. The irreversible bacteria attachment due to filtration similar to the deep bed filtration (DBF) is examined along with the commonly used reversible equilibrium adsorption (REA). The characteristics of the two models are highlighted. The options for bacteria growth are the uniform growth in both phases and growth of attached bacteria only. It is found that uniform growth scenario applied to filtration model provides formation of two oil banks during recovery. This feature is not reproduced by application of REA model or DBF with growth in attached phase. This makes it possible to select a right model based on the qualitative analysis of the experimental data. A criterion is introduced to study the process efficiency: the dimensionless time at which average recovery between pure water injection and maximum surfactant effect is reached. This characteristic recovery period (CRP) was studied as a function of the different MEOR parameters such as bacterial activity, filtration coefficients, and substrate injection concentrations. For both growth scenarios, there is a zone of optimal activity at which the CRP is minimal. Dependence of the CRP on substrate concentration for uniform growth scenario has also an optimal zone. Therefore, growth rate and the substrate concentration should be above a certain threshold value and still not be too high to obtain the minimum CRP. On the other hand, no such zone was found if the bacteria could grow only in the attached phase. Dependencies on both the injected concentration and filtration coefficient are monotonous in this case.     

Synthesis of Isodehydroilludin M

Isodehydroilludin M was synthesized from carbonyl ylid 1,3-dipolar cycloaddition product that was further elaborated with an unusual PCC-mediated double oxidation reaction.     

Photoelectric response of thiamonomethinecyanine J-aggregate nanoribbons deposited via dielectrophoresis technique

Different dyes can produce the two-dimensional self-assembled structures called J- and H-aggregates that make them attractive material for various nano-electronics applications. This paper shows that electrokinetic deposition technique of cyanine dye J-aggregates is appropriate for the photoelectric devices production. The influence of excitation in visible on conductivity is observed in J-aggregate channel structure deposited using dielectrophoresis technique. The effect was observed in self-assembled thiamonomethinecyanine nanostructures. Samples were analyzed using AFM and micro-Raman spectroscopy methods. Analysis shows that photoelectric response must be the result of conductive channel formation in the structure of J-aggregate between the electrodes. The observed increase in conductivity manifold exceeds the structure dark conductivity: maximal increase comprised 6.3 times.