A new luciferase reporter gene assay for the detection of androgenic and antiandrogenic effects based on a human prostate specific antigen promoter and PC3/AR human prostate cancer cells.

We developed a new mammalian cell-based luciferase reporter gene assay for androgenic and antiandrogenic activities of chemicals and environmental samples. Environmental samples usually have a complex matrix that may contain the constituents acting as androgen receptor (AR) agonists, AR antagonists or aryl hydrocarbon receptor (AhR) agonists. AhR agonists are known to elicit the antiandrogenic effect through cross-talk between AR and AhR signal transduction pathways. In this study, PC3/AR human prostate carcinoma cells were transiently transfected with a prostate-specific antigen (PSA) promoter-driven luciferase expression plasmid. The cells were treated with a test compound or an environmental sample for 24 h at 37 degrees C and then measured for luciferase activity. The luciferase activity was induced by dihydrotestosterone (DHT) in a concentration-dependent manner in a concentration range from 10 fM to 1 nM. R1881, a synthetic androgen receptor agonist, induced luciferase activity and its inductive effects was additive to that of DHT. The luciferase activity was not induced by cortisol, a glucocorticoid, progesterone, a progestin, and 17beta-estradiol, an estrogen in a concentration range of up to 1 microM. DHT-induced luciferase activity was reduced by bicalutamide and cyproterone acetate, AR antagonists, and also by benzo[a]pyrene, an aryl hydrocarbon receptor agonist, through AhR-mediated pathways. All of these findings indicate that the present assay system correctly responds to AR agonists, AR antagonists and AhR agonist and, therefore, it is a powerful tool for the sensitive and selective screening of chemicals and environmental samples for their androgenic and antiandrogenic activities. We developed the first assay system, in which the expression of luciferase was driven by the promoter of a prostate-specific antigen gene, a typical human androgen-regulated gene.     

Hair analysis of nicotine and cotinine for evaluating tobacco smoke exposure by liquid chromatography-mass spectrometry

A simple liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method for the determination of nicotine and cotinine in human hair was established. In the procedure, a hair sample (10 mg) was washed with dichloromethane and digested in 2.5 M sodium hydroxide. The digest was extracted with dichloromethane and then 25 mM hydrochloric acid in methanol was added to the extract, to prevent loss of analytes. The solution was evaporated and redissolved in the mobile phase, methanol/10 mM ammonium acetate (30/70, v/v). A 20 microL aliquot of redissolved solution was subjected to analysis. Nicotine and cotinine in human hair were quantified by using deuterated analytes as internal standards. The quantification limits were 8 microg/L for nicotine and 0.9 microg/L for cotinine. The proposed method was applied to measure the concentrations of nicotine and cotinine in hair of smokers and non-smokers to evaluate their self-reported smoking and exposure to environmental tobacco smoke. In both cases, the method provided good selectivity, accuracy and precision.     

Hydrogen Effect on Coke Removal and Catalytic Performance in Pre-Carburization and Methane Dehydro-Aromatization Reaction on Mo/HZSM-5

1. Introduction As an effective utilization of methane, the methane dehydro-aromatization was focused in the last decade [1-28]. Over the Mo/HZSM-5 bi- functional catalyst at high reaction temperature, methane can be converted into light aromatics (ben- zene and naphthalene) and hydrogen. Mo active species can activate the C—H bond of methane; and HZSM-5 supplies the acid sites for the oligomeriza- tion and cyclization of hydrocarbons to form aromat- ics, and suppresses the deeper condens…     

Mediated amperometric biosensor for hypoxanthine based on a hydroxymethylferrocene-modified carbon paste electrode

An amperometric enzyme electrode for the determination of hypoxanthine in fish meat is described. The hypoxanthine sensor was prepared from xanthine oxidase immobilized by covalent binding to cellulose triacetate and a carbon paste electrode containing hydroxymethylferrocene. The xanthine oxidase membrane was retained behind a dialysis membrane at a carbon paste electrode. The sensor showed a current response to hypoxanthine due to the bioelectrocatalytic oxidation of hypoxanthine, in which hydroxymethyiferrocene served as an electron-transfer mediator. The limit of detection is 6 × 10^?7 M, the relative standard deviation is 2.8% (n=28) and the response is linear up to 7 × 10^?4 M. The sensor responded rapidly to a low hypoxanthine concentration (7 × 10^?4 M), the steady-state current response being achieved in less than 1 min, and was stable for more than 30 days at 5 ° C. Results for tuna samples showed good agreement with the value determined by the conventional method.     

Supramolecular hydrogels and organogels based on novel l-valine and l-isoleucine amphiphiles

New low-molecular-weight gelators based on l-valine and l-isoleucine gelators, which have a positively charged terminal group, can gel not only pure water and aqueous solutions containing inorganic acids and salts but also some organic solvents and oils.     

Quantification of 2-hydroxyfluorene in human urine by column-switching high performance liquid chromatography with fluorescence detection

A high performance liquid chromatographic (HPLC) method for the quantification of 2-hydroxyfluorene (2-OHF) in normal human urine was established using deuterated 2-hydroxyfluorene (2-OHF-d9) as an internal standard with column-switching and fluorescence detection. The 2-OHF-d9 was synthesized by the metabolism of deuterated fluorene with cytochrome P450. The analytes were cleaned up on an ODS pre-column, via column-switching, and separated on an alkylamide-type reversed phase column. The internal standard eluted immediately prior to non-deuterated 2-OHF on the HPLC system and had nearly the same fluorescence characteristics as the non-deuterated 2-OHF. The detection limit was 0.03 nmol l(-1) (S/N = 3) and the calibration range of urine sample was from 0.2 to 50 nmol l(-1). The urine sample treatment involved enzymatic hydrolysis followed by solid phase extraction using a Sep-Pak C18 cartridge. 2-OHF was observed in the form of conjugates such as glucuronide and/or sulfate in human urine, and urinary metabolites were completely hydrolyzed for 2 h with beta-glucuronidase/aryl sulfatase. The proposed method was used to determine urinary 2-OHF in smokers and non-smokers, and showed that the urinary concentrations of 2-OHF in smokers were significantly higher than those in non-smokers (P < 0.01). Thus, the data suggest that urinary 2-OHF might be a sensitive and specific biological marker for the assessment of the exposure to polycyclic aromatic hydrocarbons.     

Improvement of an automatic HPLC system for nitropolycyclic aromatic hydrocarbons: removal of an interfering peak and increase in the number of analytes.

An automatic HPLC system for analyzing nitropolycyclic aromatic hydrocarbons (NPAHs, nitroarenes) in airborne particulates was previously described (Anal. Chim. Acta, 2001, 445, 20). Some problems with this system were that it generated a peak originating from an ascorbic acid solution that elutes at a retention time close to that of 1,6-dinitropyrene (DNP), and that it was able to analyze only 1,3-, 1,6-, 1,8-DNPs and 1-nitropyrene (I-NP). Here, we describe an improved system that effectively removes the interfering peak by introducing an ODS column just after the pump for the ascorbic acid solution, and which is capable of analyzing several additional compounds (2-, 4-NPs, 2-nitrofluorene. 6-nitrochrysene, 7-nitrobenz[a]anthracene, 3-nitroperylene and 6-nitrobenzo[a]pyrene etc.). The improved sensitivities were achieved by concentrating the compounds in a benzene-ethanol extract from airborne particulates, by increasing the loading time of the sample solution from 20 to 38 min, and by increasing the flow rate of an ascorbic acid solution from 1.3 to 1.8 mL/min.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Synthetic Studies on Spirolides A and B: Formation of the Upper Carbon Framework Based on a Lewis Acid Template-Catalyzed Diels–Alder Reaction

The upper fragment of spirolides A and B, which are marine phycotoxins that exhibit strong antagonistic activities on nicotinic acetylcholine receptors, was constructed. The functionalized cyclohexene in spirolides was stereoselectively synthesized from the bicyclic lactone, which could be readily accessed by the Lewis acid template-catalyzed asymmetric Diels–Alder reaction of the pentadienol and methyl acrylate.     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455