Evaluating cost impacts on reverse logistics using an Economic Order Quantity (EOQ) model with environmental and social considerations

Central European Journal of Operations Research - Societal awareness and legislation changes concerning sustainability have affected how organizations generate value for stakeholders, as well as...     

Supercritical fluid chromatography with photodiode array detection for pesticide analysis in papaya and avocado samples

To improve the analysis of pesticides in complex food matrices with economic importance, alternative chromatographic techniques, such as supercritical fluid chromatography, can be used. Supercritical fluid chromatography has barely been applied for pesticide analysis in food matrices. In this paper, an analytical method using supercritical fluid chromatography coupled to a photodiode array detection has been established for the first time for the quantification of pesticides in papaya and avocado. The extraction of methyl parathion, atrazine, ametryn, carbofuran, and carbaryl was performed through the quick, easy, cheap, effective, rugged, and safe methodology. The method was validated using papaya and avocado samples. For papaya, the correlation coefficient values were higher than 0.99; limits of detection and quantification ranged from 130–380 and 220–640 μg/kg, respectively; recovery values ranged from 72.8–94.6%; precision was lower than 3%. For avocado, limit of detection values were ?450 μg/kg; precision was lower than 11%; recoveries ranged from 50.0–94.2%. Method feasibility was tested for lime, banana, mango, and melon samples. Our results demonstrate that the proposed method is applicable to methyl parathion, atrazine, ametryn, and carbaryl, toxics pesticides used worldwide. The methodology presented in this work could be applicable to other fruits.     

Effects of Ultraviolet Radiation (UVA+UVB) and Copper on the Morphology,Ultrastructural Organization and Physiological Responses of the Red Alga Pterocladiella capillacea

The effect of ultraviolet (UV) radiation and copper (Cu) on apical segments of Pterocladiella capillacea was examined under two different conditions of radiation, PAR (control) and PAR+UVA+UVB (PAR+UVAB), and three copper concentrations, ranging from 0 (control) to 0.62, 1.25 and 2.50 μm . Algae were exposed in vitro to photosynthetically active radiation (PAR) at 70 μmol photons m^?2 s^?1, PAR + UVB at 0.35 W m^?2 and PAR +UVA at 0.70 W m^?2 during a 12‐h photocycle for 3 h each day for 7 days. The effects of radiation and copper on growth rates, content of photosynthetic pigments and photosynthetic performance were analyzed. In addition, samples were processed for light and transmission electron microscopy. The content of photosynthetic pigments decreased after exposure to radiation and Cu. Compared with PAR radiation and copper treatments modified the kinetics patterns of the photosynthesis/irradiance curve. The treatments also caused changes in the ultrastructure of cortical and subcortical cells, including increased cell wall thickness and accumulation of plastoglobuli, as well as changes in the organization of chloroplasts. The results indicate that the synergistic interaction between UV radiation and Cu in P. capillacea, led to the failure of protective mechanisms and causing more drastic changes and cellular imbalances.     

Influence of substrate temperature and N2/Ar flow ratio on the stoichiometry,structure and hardness of TaNx coatings deposited by DC reactive sputtering

The effect of substrate temperature and N2/Ar flow ratio on the stoichiometry, structure and hardness of TaN_x coatings prepared on (111) Si substrates by DC reactive sputtering was investigated. For the structural, chemical and morphological analysis, X‐ray diffraction (XRD), Auger electron scanning and atomic force microscopy were respectively used. Hardness values of thin films were determined using the work of indentation model from nanoindentation measurements. TaN stoichiometric coatings were obtained for samples deposited at room temperature. The stoichiometric TaN phase was not obtained by increasing the temperature up to 773 K, even when increasing the N₂/Ar flow ratio. Even when a saturation in nitrogen content was achieved, nitrogen vacancies are still present in those samples. For coatings prepared at 773 K and low N₂/Ar flow ratio, a phase mixture between TaN_x and cubic α‐Ta was observed, while a cubic structure δ‐TaN was formed by increasing the N₂/Ar flow ratio. A maximum in hardness and (38 GPa) was obtained for the sample deposited at 773 K and a N₂/Ar flow ratio of 0.2, which presented a δ‐TaN cubic crystalline structure and a roughness value of 1.6 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Babassu mesocarp (Orbignya phalerata Mart) nanoparticle-based biosensors for indirect sulfite detection in industrial juices

Journal of Solid State Electrochemistry - The present work proposes a new electrochemical sulfite biosensor based on babassu mesocarp nanoparticles (BMNPs) immobilized on the surface of a pyrolytic...     

Applicability of Microaerobic Technology to Enhance BTEX Removal from Contaminated Waters

As the addition of low concentrations of oxygen can favor the initial degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds, this work verified the applicability of the microaerobic technology to enhance BTEX removal in an anaerobic bioreactor supplemented with high and low co-substrate (ethanol) concentrations. Additionally, structural alterations on the bioreactor microbiota were assessed throughout the experiment. The bioreactor was fed with a synthetic BTEX-contaminated water (~ 3 mg L^?1 of each compound) and operated at a hydraulic retention time of 48 h. The addition of low concentrations of oxygen (1.0 mL min^?1 of atmospheric air at 27 °C and 1 atm) assured high removal efficiencies (> 80%) for all compounds under microaerobic conditions. In fact, the applicability of this technology showed to be viable to enhance BTEX removal from contaminated waters, especially concerning benzene (with a 30% removal increase), which is a very recalcitrant compound under anaerobic conditions. However, high concentrations of ethanol adversely affected BTEX removal, especially benzene, under anaerobic and microaerobic conditions. Finally, although bacterial community richness decreased at low concentrations of ethanol, in general, the bioreactor microbiota could deal with the different operational conditions and preserved its functionality during the whole experiment.     

Non-conventional oils for biodiesel production: a study of thermal and oxidative stability

Vegetable oils with variable proportions of oleic, linoleic, and linolenic acids are more susceptible to oxidative processes. In this subject, this study evaluates the physical chemical properties and oxidative stability of non-conventional oils such as andiroba, babassu, sesame, oiticica, jatropha, and grape through accelerated oxidation techniques (pressurized differential scanning calorimetry, Rancimat and PetroOxy). It was verified that babassu and andiroba oil do not showed detectable induction period presenting high oxidative stability; moreover, it was observed that the enthalpic events occurred in 1.19, >10, 0.53, 0.49, 0.49, and 0.60 h for the andiroba oil, babassu oil, sesame seeds, jatropha, oiticica oils, and grapes, respectively, stimulating the conclusion of greater stability for the babassu oil.