Babassu mesocarp (Orbignya phalerata Mart) nanoparticle-based biosensors for indirect sulfite detection in industrial juices

Journal of Solid State Electrochemistry - The present work proposes a new electrochemical sulfite biosensor based on babassu mesocarp nanoparticles (BMNPs) immobilized on the surface of a pyrolytic...     

Phase transition in an occupationally disordered sulfate system

We have investigated the behavior of the Li_1.43Cs_0.57SO₄ single-crystal Raman spectra and dielectric permittivity as a function of temperature. It was observed that the crystal, which is an occupationally disordered system, with orthorhombic C_2v² structure at room temperature, undergoes a phase transition at 230 K. In the new phase the SO₄ tetrahedra remain in two non-equivalent sites and there is no evidence of the doubling of the unit cell.     

Electroactive LbL films of metallic phthalocyanines and poly(<Emphasis Type="Italic">0</Emphasis>-methoxyaniline) for sensing

Multilayered nanostructured films have been widely investigated for electrochemical applications as modified electrodes, including the layer-by-layer (LbL) films where properties such as thickness and film architecture can be controlled at the molecular level. In this study, we investigate the electrochemical features of LbL films of poly(o-methoxyaniline; POMA) and tetrasulfonated phthalocyanines containing nickel (NiTsPc) or copper (CuTsPc). The films displayed well-defined electroactivity, with redox pairs at 156 and 347 mV vs SCE, characteristic of POMA, which allowed their use as modified electrodes for detecting dopamine and ascorbic acid at concentrations as low as 10⁻⁵ M. This paper is dedicated to Prof. Francisco Nart, in memoriam.     

Highly stereoselective synthesis of steroidal 2,5-diketopiperazines based on isocyanide chemistry

In this Letter we report that the Ugi reaction/cyclization sequence on a steroidal 17-carboxaldehyde leads to novel steroidal 2,5-diketopiperazines with a noteworthy stereoselectivity. A wide variety in the substitution pattern in the heterocyclic moiety was easily achieved by changing the components in the Ugi reaction.     

Renormalizing the Lippmann-Schwinger equation for the one-pion exchange potential

We address the question whether the cut-off dependence, which has to be introduced in order to properly define the Lippmann-Schwinger equation for the one-pion exchange potential plus local (δ-function) potentials, can be removed (up to inverse powers of it) by a suitable tuning of the various (bare) coupling constants. We prove that this is indeed so both for the spin singlet and for the spin triplet channels. However, the latter requires, in the limit when the cut-off is taken to infinity, such a strong cut-off dependence of the coupling constant associated to the non-local term which breaks orbital angular momentum conservation, that the renormalized amplitude lacks from partial-wave mixing. We argue that this is an indication that this term must be treated perturbatively. Received: 7 October 2002 / Accepted: 15 January 2003 / Published online: 5 May 2003     

Electrosynthesis of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene) and poly(<Emphasis Type="Italic">p</Emphasis>-phenylene/pyrrole) films under controlled humidity

Poly(p-phenylene/pyrrole) (PPP-PPY) films were electrochemically synthesised on transparent indium-tin-oxide-covered glass (ITO) electrodes. The presence of two monomers, p-phenylene and pyrrole, in the polymerisation medium facilitated the synthesis process, yielding electroactive, uniform and stable films. In order to obtain materials with improved quality, PPP, PPY and PPP-PPY films were prepared in a mild, dry atmosphere. The morphological, electrochemical and optical properties were compared for different films obtained by varying the number of cycles with and without controlling humidity.     

Anisotropic properties in textured lead barium niobate compositions around the morphotropic phase boundary

Partially textured Pb_xBa_1 ? xNb₂O₆ ceramics, with compositions around the morphotropic phase boundary, were obtained by the hot forging technique. Scanning electron microscopy revealed that the grains were arranged with their lengthwise direction preferentially in the direction of the forging. From the differences of the X ray diffraction profiles between the samples analyzed in the direction of forging and those analyzed in the pressing direction it was possible to confirm the crystallographic growth habit of the PBN ceramics for the tetragonal and orthorhombic symmetry compositions. The identification of a mixture of tetragonal and orthorhombic symmetry phases in a whole range of studied compositions was also possible. The phase transformation around the morphotropic phase boundary (in this case, tetragonal (4mm) to orthorhombic (m2m)) could be analyzed through the direction change of the polarization vector in partially textured PBN ceramics.     

Spectrophotometric determination of Mo(VI) in steel using a homogeneous ternary solvent system after single-phase extraction

An alternative procedure for the determination of Mo(VI) with thiocyanate is proposed. According to this procedure, Mo(VI) is extracted with alpha-benzoinoxime by single-phase extraction in a water/ethanol/chloroform homogeneous ternary solvent system at a nominal pH of 2 and then is spectrophotometrically determined, after separation from the matrix in a similar solvent mixture. The determination is performed by forming a homogeneous phase using the solvent containing the extracted metal as one of the components of the reactional solvent system, eliminating the time-consuming metal complex destruction step. Under these experimental conditions, the calibration graph is linear up to 8.00 mug ml(-1), according to the equation A=0.005+0.143C(Mo(VI)) (r(2)=0.9999). Using the experimental conditions described, the absorbance readings are stable for periods up to 18 h. The interference of the most common interfering species for this method can be prevented by adding Fe(2+) and H(2)PO(4)(-) to the solvent system prior to the extraction step. The accuracy of the proposed method was evaluated by comparing with standard samples determined by atomic absorption measurements with background correction.     

Design and acoustic characterization of limited diffraction ultrasonic devices

Limited diffraction ultrasonic transducers are devices that have a large depth of acoustic field without important effects of diffraction, which make them optimal in applications of medical images, among others. This report details how this special type of piezoelectric device was designed by means of a simple technology using three electrodes in the form of concentric rings in both faces of a ferroelectric ceramic disk, which were used to apply a profile of non-homogeneous polarization. Once designed, the radiation fields emitted by these resonators were characterized experimentally by electro-acoustic and acousto-optic techniques and were compared with those emitted by conventional devices. As shown in the experimental characterizations, ultrasonic transducers with optimal properties for use in medical applications such as good collimation of the ultrasound beam, high lateral resolution, as well as little effects of diffraction were obtained.