Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

Comparative bioavailability of two zolpidem hemitartrate formulations in healthy human Brazilian volunteers using high-performance liquid chromatography coupled to tandem mass spectrometry

To assess the bioequivalence of two zolpidem hemitartrate formulations in 30 healthy volunteers. Plasma samples were obtained over a 24 h period. Plasma concentrations of zolpidem were analyzed by liquid chromatography coupled to tandem mass spectrometry with positive ion electrospray ionization using multiple reaction monitoring. Values of peak concentration (C_max), area under curve (AUC), half-life, elimination constant, volume of distribution and clearance showed statistically significant differences when comparing women (604.34 ng h/ml, 127.36 ng/ml, 4.4 h, 0.18 1/h, 50.56 L and 8.55 L/h, respectively) and men (276.1 ng h/ml, 70.9 ng/ml, 3.3 h, 0.26 1/h, 91.42 L and 24.34 L/h, respectively), receiving the same dose (5 mg), respectively. The geometric means with corresponding 90% confidence interval for Test/Reference percentage ratios were 99.73% (CI 93.69–106.16) for C_max, 97.44% (90% CI = 91.85–103.37%) for area under curve of plasma concentration until the last concentration observed (AUC_last) and 98.30% (90% CI = 92.48–104.49) for the area under curve between the first sample (pre-dosage) and infinity (AUC_0–inf). Since the 90% CI for AUC_last, AUC_0–inf and C_max ratios were within the 80–125% interval proposed by the US Food and Drug Administration, it was concluded that zolpidem hemitartrate formulation (5 mg orodispersible tablet) is bioequivalent to the zolpidem hemitartrate formulation (Patz SL 5 mg sublingual tablet) with regard to both the rate and the extent of absorption. A new formulation of zolpidem 2.5 mg may be useful in women for the same clinical benefits as the 5 mg formulation in men.     

Markov shifts and topological entropy of families of homoclinic tangles

The existence of a homoclinic orbit in dynamical systems implies chaotic behaviour with positive entropy. In this work, we determine explicitly the Markov shifts associated to certain Smale horseshoe homoclinic orbits which allow us to compute a lower bound for the topological entropy that such a system can have. It is done associating a heteroclinic orbit which belongs to the same isotopy class and then determining the Markov partition of the dynamical core of an end periodic mapping.     

Control over the Self‐Assembly Modes of PtII Complexes by Alkyl Chain Variation: From Slipped to Parallel π‐Stacks

We report the self‐assembly of a new family of hydrophobic, bis(pyridyl) Pt^II complexes featuring an extended oligophenyleneethynylene‐derived π‐surface appended with six long (dodecyloxy ( 2 )) or short (methoxy ( 3 )) side groups. Complex 2 , containing dodecyloxy chains, forms fibrous assemblies with a slipped arrangement of the monomer units (d_Pt???Pt≈14 Å) in both nonpolar solvents and the solid state. Dispersion‐corrected PM6 calculations suggest that this organization is driven by cooperative π–π, C?H???Cl and π–Pt interactions, which is supported by EXAFS and 2D NMR spectroscopic analysis. In contrast, nearly parallel π‐stacks (d_Pt???Pt≈4.4 Å) stabilized by multiple π–π and C?H???Cl contacts are obtained in the crystalline state for 3 lacking long side chains, as shown by X‐ray analysis and PM6 calculations. Our results reveal not only the key role of alkyl chain length in controlling self‐assembly modes but also show the relevance of Pt‐bound chlorine ligands as new supramolecular synthons.     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

Highly Axial Magnetic Anisotropy in a N3O5 Dysprosium(III) Coordination Environment Generated by a Merocyanine Ligand

A spiropyran‐based switchable ligand isomerizes upon reaction with lanthanide(III) precursors to generate complexes with an unusual N₃O₅ coordination sphere. The air‐stable dysprosium(III) complex shows a hysteresis loop at 2 K and a very strong axial magnetic anisotropy generated by the merocyanine phenolate donor.     

Assessment of a high‐order MUSCL method for rotor flows

This work presents the implementation of a high‐order, finite‐volume scheme suitable for rotor flows. The formulation is based on the variable extrapolation MUSCL‐scheme, where high‐order spatial accuracy (up to fourth‐order) is achieved using correction terms obtained through successive differentiation. A variety of results are presented, including 2‐ and 3‐dimensional test cases. Results with the proposed scheme, showed better wake and higher resolution of vortical structures compared with the standard MUSCL, even when coarse meshes were employed. The method was also demonstrated for 3‐dimensional unsteady flows using overset and moving grids for the UH‐60A rotor in forward flight and the Enhanced Rotorcraft Innovative Concept Achievement tiltrotor in aeroplane mode. For medium grids, the present method adds reasonable CPU and memory overheads and offers good accuracy on relatively coarse grids.     

Kinetics studies of 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol,and 2,4,4-trimethyl-1-pentanol with chlorine atoms: Photooxidation mechanism of 2,4,4-trimethyl-1-pentanol

The rate constants for the reaction between chlorine atoms and either 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, or 2,4,4-trimethyl-1-pentanol at 298 K were determined using the relative method with 2-butanol and 1-pentanol as reference compounds. The values obtained for 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, and 2,4,4-trimethyl-1-pentanol (k × 10¹⁰ cm³ molec⁻¹ s⁻¹) were, respectively, (2.64 ± 0.5), (2.72 ± 0.5), and (2.50 ± 0.4), in agreement with the values of the rate constants reported in bibliography for similar alcohols and the values estimated by structure activity relationship methods. The photooxidation products of 2,4,4-trimethyl-1-pentanol initiated by chlorine atoms were identified (formaldehyde, 2-propanone, 2,2-dimethyl propanal, 4,4,-dimethyl-2-pentanone, and 3,3-dimethylbutanal), and the reaction mechanism was determined.     

Selection of phage-displayed antibodies with high affinity and specificity by electrophoresis in microfluidic devices

A method development aimed for high-throughput and automated antibody screening holds great potential for areas ranging from fundamental molecular interactions to the discovery of novel disease markers, therapeutic targets, and monoclonal antibody engineering. Surface display techniques enable efficient manipulation of large molecular libraries in small volumes. Specifically, phage display appeared as a powerful technology for selecting peptides and proteins with enhanced, target-specific binding affinities. Here, we present a phage-selection microfluidic device wherein electrophoresis was performed under two orthogonal electric fields through an agarose gel functionalized with the respective antigen. This microdevice was capable of screening and sorting in a single round high-affinity phage-displayed antibodies against virus glycoproteins, including human immunodeficiency virus-1 glycoprotein 120 or the Ebola virus glycoprotein (EBOV-GP). Phages were differentially and laterally swept depending on their antigen affinity; the high-affinity phages were recovered at channels proximal to the application site, whereas low-affinity phages migrated distal after electrophoresis. These experiments proved that the microfluidic device specifically designed for phage-selection is rapid, sensitive, and effective. Therefore, this is an efficient and cost-effective method that allowed highly controlled assay conditions for isolating and sorting high-affinity ligands displayed in phages.