Effect of High Pressures on the Formation of New Compounds in the Al86Ni2Co6Gd6 Alloy

Physics of the Solid State - Using the X-ray diffraction and electron microscopy methods, the structure and the elemental and phase compositions of hypereutectic alloy Al86Ni2Co6Gd6 (hereinafter,...     

Phase Transitions in the Diluted Two-Dimensional Potts Model with the Number of Spin States q = 3 on a Square Lattice

Physics of the Solid State - The phase transitions in the two-dimensional diluted Potts model with the number of spin states q = 3 are studied by computer simulation method. The systems...     

Determination of Polycyclic Aromatic Hydrocarbons in Soils and Bottom Sediments by Gas Chromatography–Mass Spectrometry with QuEChERS Sample Preparation

Journal of Analytical Chemistry - The work is dedicated to the determination of polyaromatic hydrocarbons (PAHs) in soils and bottom sediments by gas chromatography–mass spectrometry using...     

Finite-sample properties of estimators for first and second order autoregressive processes

Statistical Inference for Stochastic Processes - The class of autoregressive (AR) processes is extensively used to model temporal dependence in observed time series. Such models are easily...     

Infrared Reflection Spectra of (FeIn2S4)x∙(In2S3)1–x Solid Solutions

Journal of Applied Spectroscopy - IR reflectance spectroscopy at 50–450 cm–1 was used to study homogeneous monocrystals of (FeIn2S3)x?(In2S3)1–x grown by the method of...     

Intermetallic Compounds CsnMk (М = Na,K, Rb,Pt, Au,Hg, Te): Geometrical and Topological Analysis,Cluster Precursors,and Self-Assembly of Crystal Structures

Crystallography Reports - A geometrical and topological analysis has been performed, and self-assembly of the crystal structures of intermetallic compounds CsnMk (М = Na, K, Rb, Pt, Au, Hg,...     

SAPO-34提升铁钒基催化剂抗碱性能研究

采用浸渍法制备Fe-VO_x/SAPO-34和Fe-VO_x/TiO₂脱硝催化剂,探究SAPO-34分子筛与TiO₂两种载体负载铁钒基氧化物催化活性及抗碱性能的差异。借助X射线衍射(XRD)、X射线光电子能谱(XPS)、氨气程序升温脱附(NH₃-TPD)、氢气程序升温还原(H₂-TPR)、原位红外漫反射(in-situ DRIFTs)等表征手段对催化剂的骨架结构、表面物化性质、氧化还原能力以及对反应气体的吸脱附情况进行分析。结果表明:SAPO-34分子筛内部特定的孔道结构和稳定的骨架,有利于活性组分在载体上均匀分散,降低碱金属对表面活性中心的物理覆盖作用;同时其表面丰富的酸位点能够作为碱金属捕获位,保护催化剂表面的活性中心,保证催化剂的吸附-反应过程能够正常进行,从而使Fe-VO_x/SAPO-34表现出良好的抗碱金属能力。     

On Laser-Induced High-Order Wave Mixing and Harmonic Generation in a Graphene Quantum Dot

JETP Letters - We present results of numerical investigations of high-order wave mixing/harmonic generation (HWM/HHG) with many-body interaction processes derived by a strong two-frequency circular...     

Advances in rapid and effective break-in/conditioning/recovery of automotive PEMFC stacks

Automotive proton exchange membrane fuel cell stacks need to meet manufacturer specified rated beginning-of-life (BOL) performance before being assembled into vehicles and shipped off to customers. The process of “breaking-in” of a freshly assembled stack is often referred to as “conditioning.” It has become an intensely researched area especially in automotive companies, where imminent commercialization of fuel cell electric vehicles (FCEVs) demands a short, energy- and cost-efficient, and practical conditioning protocol. Significant advances in reducing the conditioning time from 1 to 2 days to as low as 4h or less, in some cases without the use of additional inert gases such as nitrogen, and with minimal use of hydrogen, and specialized test stations will be discussed.     

以磷化铁为添加剂沿(111)面生长磷掺杂金刚石大单晶

掺杂是调控金刚石性能的一种重要手段。本文采用温度梯度法,在5.6 GPa、1 312 ℃的条件下,选用Fe₃P作为磷源进行磷掺杂金刚石大单晶的合成。金刚石样品的显微光学照片表明,随着Fe₃P添加比例的增加,金刚石晶体的颜色逐渐变深,包裹体数量逐渐增加,晶形由板状转变为塔状直至骸晶。金刚石晶形的变化表明Fe₃P的添加使生长金刚石的V形区向右偏移,这是Fe₃P改变触媒特性的缘故。红外光谱分析表明,Fe₃P的添加使金刚石晶体中氮含量上升,这说明磷的进入诱使氮原子更容易进入金刚石晶格中。激光拉曼光谱测试表明,随着Fe₃P添加比例的增加,所合成的掺磷金刚石的拉曼峰位变化不大,其半峰全宽(FWHM)值变大,这说明磷的进入使得金刚石晶格畸变增加。XPS测试结果显示,随着Fe₃P添加比例的增加,金刚石晶体中磷相对碳的原子百分含量也会增加,这意味着添加Fe₃P所合成的金刚石晶体中有磷存在。