自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

Amorphous High-Entropy Hydroxides of Tunable Wide Solar Absorption for Solar Water Evaporation

The high-entropy materials have raised much attention in recent years due to their extraordinary performances in mechanical, catalysis, energy storage fields. Herein, a new type of high-entropy hydroxides (e.g., NiFeCoMnAl(OH)_x) that are amorphous and capable of broad solar absorption is reported. A facile one-pot co-precipitation method is employed to synthesize these amorphous high-entropy hydroxides (a-HEHOs) under ambient conditions. The a-HEHOs thus obtained display widely tunable bandgap (e.g., from 2.6 to 1.1 eV) due to their high-entropy and amorphous characteristics, enabling efficient light absorbance and photothermal conversion in the solar regime. Further solar water evaporation measurements show that the a-HEHOs delivered a considerable energy conversion efficiency of 55%, comparable to black titanium oxides that are synthesized using more complex and expensive methods.     

Asymmetric nonlinear-mode-conversion in an optical waveguide withPT symmetry

Asymmetric mode transformation in waveguide is of great significance for on-chip integrated devices with one-way effect, while it is challenging to achieve asymmetric nonlinear-mode-conversion (NMC) due to the limitations imposed by phase-matching. In this work, we theoretically proposed a new scheme for realizing asymmetric NMC by combining frequency-doubling process and periodic PT symmetric modulation in an optical waveguide. By engineering the one-way momentum from PT symmetric modulation, we have demonstrated the unidirectional conversion from pump to second harmonic with desired guided modes. Our findings offer new opportunities for manipulating nonlinear optical fields with PT symmetry, which could further boost more exploration on on-chip nonlinear devices assisted by non-Hermitian optics.     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

3D Organic–Inorganic Perovskite Ferroelastic Materials with Two Ferroelastic Phases: [Et3P(CH2)2F][Mn(dca)3] and [Et3P(CH2)2Cl][Mn(dca)3]

Organic–inorganic hybrid perovskite-type multiferroics have attracted considerable research interest owing to their fundamental scientific significance and promising technological applications in sensors and multiple-state memories. The recent achievements with divalent metal dicyanamide compounds revealed such malleable frameworks as a unique platform for developing novel functional materials. Herein, two 3D organic–inorganic hybrid perovskites [Et₃P(CH₂)₂F][Mn(dca)₃] ( 1 ) and [Et₃P(CH₂)₂Cl][Mn(dca)₃] ( 2 ) (dca=dicyanamide, N(CN)₂⁻) are presented. Accompanying the sequential phase transitions, they display a broad range of intriguing physical properties, including above room temperature ferroelastic behavior, switchable dielectricity, and low-temperature antiferromagnetic ordering (T_c=2.4 K for both 1 and 2 ). It is also worth noting that the spontaneous strain value of 1 is far beyond that of 2 in the first ferroelastic phase, as a result of the precise halogen substitution. From the point view of molecular design, this work should inspire further exploration of multifunctional molecular materials with desirable properties.     

Effect of biaxial strain and hydrostatic pressure on the magnetic properties of bilayer CrI3

Two-dimensional van der Waals magnetic materials are intriguing for applications in the future spintronics devices, so it is crucial to explore strategy to control the magnetic properties. Here, we carried out first-principles calculations and Monte Carlo simulations to investigate the effect of biaxial strain and hydrostatic pressure on the magnetic properties of the bilayer CrI₃. We found that the magnetic anisotropy, intralayer and interlayer exchange interactions, and Curie temperature can be tuned by biaxial strain and hydrostatic pressure. Large compressive biaxial strain may induce a ferromagneticto-antiferromagnetic transition of both CrI₃ layers. The hydrostatic pressure could enhance the intralayer exchange interaction significantly and hence largely boost the Curie temperature. The effect of the biaxial strain and hydrostatic pressure revealed in the bilayer CrI₃ may be generalized to other two-dimensional magnetic materials.     

Nanomaterials in Cerebrovascular Disease Diagnose and Treatment

Cerebrovascular diseases (CVDs) are among the most serious diseases with high mortality and disability rates. The prevalent diagnosis and treatment methods of CVDs include imaging and interventional therapy. With the development of nanotechnology, large numbers of nanomaterials have been applied to the diagnosis and treatment of CVDs, mainly including carbon nanotubes, quantum dots, fullerenes, and dendrimers. In this review, the applications of nanomaterials in the field of diagnosis and treatment of CVDs, mainly including drug target delivery, imaging, therapy, endovascular treatment, and angiogenesis, are summarized. The applications of nanomaterials in the field of CVD are almost in the laboratory, and more effort is needed for clinical translation. The aim of this review is to provide useful information for future research and equipment development.     

Quantum Watermark Algorithm Based on Maximum Pixel Difference and Tent Map

International Journal of Theoretical Physics - A new quantum watermark algorithm is presented by combining maximum pixel difference partitioning with the least significant bit substitution...