Synthesis of RE Y zeolite for formulation of FCC catalyst and the catalytic performance in cracking of n-hexadecane

Research on Chemical Intermediates - This study presents the synthesis of rare earth-doped Y (RE Y) zeolite, its application in formulation of a fluid catalytic cracking (FCC) catalyst and the...     

Effect of zeolite pore morphology on solvent-less alkylation of benzene with 1-hexene

In an attempt to convert the carcinogenic benzene which is almost restricted for its use in gasoline, alkylation reaction with olefin 1-hexene has been conducted on various zeolites. Four zeolites having different pore topology and pore size have been applied as solid acid catalysts for effective production of alkylate in a liquid phase, solvent-less low temperature reaction. The textural properties of all the four zeolites (ZSM-5, MOR, BEA, HY) have been characterized for crystal morphology by TEM, crystal structure by XRD and FTIR, BET for surface area, N₂ sorption for porosity and TPD for acidity. Among the zeolite, BEA possessed high surface area (600.61 m²/g) and enhanced meso pores volume (0.3956 cm³/g) as compared to other zeolite samples. The performance of BEA was also observed to be superior in the liquid phase alkylation of benzene with 1-hexene in a batch reactor under autogenous pressure without using any solvent. At the optimum reaction conditions, the benzene conversion was 86.6 wt% and 3-Phenylhexane, 2-Phenylhexane yield were about 47.9 wt% and 38.7 wt% respectively on this catalyst. The BEA also exhibited longer time-on-stream and reusability performance, thus offers an attractive route for converting benzene into valuable (3-Phenylhexane, 2-Phenylhexane) alkylate product useful for the manufacturing of fine chemicals, dyestuff, detergents and scents.     

Cellulose-synthesizing machinery in bacteria

Cellulose - Cellulose is produced by all plants and a number of other organisms, including bacteria. The most representative cellulose-producing bacterial species is Gluconacetobacter xylinus, an...     

The Mechanism of Thionyl Chloride Reaction with Dialkyl Alkylphosphonothionate Using 31 P NMR

Based on 31 P NMR studies of thionyl chloride reaction with dialkyl alkylphosphonothionates, a method for preparation of alkylphosphonic dichloride has been investigated. A mechanism via intermediacy of ester chloride is suggested.     

Flow Through Diffusion Cell Method: A Better Approach to Study Drug Release Behavior as Compared to Traditional Dissolution Test Method

Co‐polymeric hydrogels consisting of N‐vinyl‐2‐pyrrolidone (NVP) and acrylic acid (AAc) were synthesized and evaluated for release of a model drug, i.e., vitamin B₁₂. Release studies in simulated gastric fluid (pH 1.2) and intestinal fluid (pH 7.4), at 37°C, showed the hydrogels to be pH sensitive. An in vitro release study by ‘traditional dissolution test’ (TDT) showed that percent drug released from the hydrogel was nearly 8.6±2.1 and 83.2±4.8 in the media of pH 1.2 and 6.8, respectively. However, in order to incorporate in vivo GI conditions such as acidic pH and high water content in the stomach, low water content and the presence of a semi–solid mass in the large intestine, a new test model, called flow through diffusion cell (FTDC) was also used. The two approaches yielded almost different release profiles. The gels were characterized by thermogravimetric analysis and FTIR spectroscopy.     

Dynamic Release of Propranolol HCl from Cationic Ion–Exchanger–Loaded Calcium Alginate Beads

The dynamic release of drug propranolol HCl from the propranolol HCl–resin complex (PRC) loaded calcium alginate beads has been studied in the buffer media of pH 1.2 at the physiological temperature 37°C. The PRC encapsulated beads demonstrated nearly 58.04% release while naked PRC particles released 98.00% drug in 24 h in the gastric fluid. The amount of drug released was found to increase with and decrease in the amount of sodium alginate in the beads. Similarly, with the increase in the amount of entrapped PRC particles within the beads, the quantity of drug released was also observed to increase. The degree of crosslinking of beads also affected the release kinetics. Interestingly, the release from naked PRC particles followed ‘first‐order’ kinetics while PRC particles, entrapped in calcium–alginate beads, exhibited ‘diffusion controlled’ release behavior as indicated by liner nature of fractional release vs. √t plot.     

Molecular Modeling and 3D-QSAR Studies in 2-Aziridinyl-and 2,3-Bis(Aziridinyl)-1,4-Naphthoquinonyl Sulfonate and Acylate Derivatives as Potential Antimalarial Agents

Abstract

Malaria is still continuing to be one of the most dreadful diseases of the tropical countries particularly due to the development of resistance to the existing antimalarials. From observed, antimalarial activity of 2-aziridinyl- and 2,3-bis(aziridinyl)-1,4-naphthoquinonyl sulfonate and acylate derivatives acting through redox cycling mechanism, molecular modeling and three dimensional-quantitative structure activity relationship (3D-QSAR) studies have been carried out on a set of 63 compounds to identify important pharmacophors. Among several 3D-QSAR models generated, three models with correlation coefficient r > 0.82, match > 0.60 and chance = 0.00 have shown two common biophoric sites: one being the oxygen atom at position 1 of the naphthoquinone ring in terms of π-population, charge and electron donating ability while the second being the center of the phenyl ring in terms of its 6π-electrons. In addition to these sites, the models also share two common secondary sites: one positively contributing H-acceptor site while the second site contributing negatively in terms of steric refractivity. All these models showed good agreement between the experimental, calculated and predicted antimalarial activities.     

One-Pot Synthesis and Fungicidal Activity of Pyrimidinylidenamido- and Thiazolinylidenamidomonothiophosphoric Esters

A novel one-pot synthesis of four new classes of amidothiophosphoric esters and trisamidothiophosphoric esters is developed. (1-Alkyl-2-pyrimidinylidenamido)bis(diethylamido)thiophosphates, (1-alkyl-2-pyrimidinylidenamido)bis (O-2/4-methylphenyl)thiophosphates, (3-alkyl-2-thiazolinylidenamido)bis (diethylamido)thiophosphate and (3-alkyl-2-thiazolinylidenamido)bis(O-2/4-methylphenyl)thiophosphates are obtained from the nucleophilic substitution and oxidation of N-alkyl-2-cycloiminylidenaminodichlorophosphines generated in situ from the reaction of the corresponding N-alkyl-2-aminocycloiminium halide with phosphorus trichloride and triethylamine. The synthesized thiophosphoric esters have been investigated for fungicidal properties.     

Electric field gradient in nanostructured SnO2 studied by means of PAC spectroscopy using 111Cd or 181Ta as probe nuclei

Electric quadrupole interactions were studied in pure and Mn-doped powder samples and thin films of SnO₂ using perturbed γγ angular correlation spectroscopy (PAC). The powder samples were prepared by Sol gel method and the thin film were prepared on the Si (100) substrate by sputtering technique using Sn in the oxygen atmosphere. The samples were characterized by x-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. The thickness of the film was 100 nm. The average particle size of the SnO₂ powder samples was determined to be smaller than 60 nm. The radioactive ¹¹¹In and ¹⁸¹Hf tracers were introduced in the powder samples during the sol gel chemical process. Radioactive ¹¹¹In was implanted on the SnO₂ thin films using the University of Bonn ion implanter (BONIS). PAC measurements were carried out in a four BaF₂ detector spectrometer in the temperature range of 77–973 K for samples annealed at different temperatures. The PAC results for both nuclear probes show the presence of two electric quadrupole interactions. The major fractions in both cases correspond to the substitutional sites in the rutile phase of SnO₂. The results are compared with previous PAC measurements.     

A Convenient Method of Benzylic Oxidation with Pyridinium Chlorochromate

Oxidation of indans and tetralin derivatives to their corresponding indanones and tetralones is of considerable value i n organic synthesis and many methods have been reported for accomplishing this conversion. Traditionally these oxidations are performed with chromic acid in acetic acid and the yields in general are moderate. Recently Eisenbraun4 has studied indetail the benzylic oxidation with the Jones reagent and compared the selectivity and yield of oxidation with other chromium(V1) reagents like bipyridinim chlorochrmate, (BiPCC). It was found that there was no improvement in yield and in the case of BiPCC a molar ratio 16% 1 (oxidant: substrate) was employed to get