ILC正电子源靶接触热传导冷却技术的初步研究

国际直线对撞机（ILC）正电子靶沉积的热功率将超过20 kW,传统的冷却方式已无法满足要求。美国Argonne国家实验室提出了摩擦接触热传导冷却的方法。根据Argonne实验室的研究方案,设计了一种旋转摩擦接触冷却的简化装置,根据热传导理论,结合ANSYS软件模拟了旋转冷却过程中的温度分布,理论上验证了方法的可行性。按照模拟的参数和结果,进行了摩擦接触热传导冷却实验,通过实验结果和数据分析证实了,低温区（20℃~50℃）有良好的冷却效应,初步验证了摩擦接触热传导冷却方案的有效性。A new scheme that cooling international Linear Collider (ILC) positron source target by touching thermal conduction (TTC) is presented by Argonne National Laboratory (ANL).Recent results of simulation for cooling the iron targets with 300 and 450 W heat reservoir by ANSYS and experiment of cooling the iron target with 300 and 450 W friction heat reservoir at Institute of Modern Physics (IMP),Chinese Academy of Sciences (CAS),have proved that the TTC has good cooling effect in low temperature zone (20℃~50℃),and preliminarily verified the feasibility of TTC for cooling the ILC positron source target.     

消色散270°偏转磁铁系统设计及束流动力学研究

对三种常用结构的270°偏转磁铁进行系统的分析研究,采用数值计算和模拟方法对双磁铁不对称偏转结构、三块90°磁铁偏转结构和70°+130°+70°偏转结构这三种不同的270°偏转磁铁系统进行模拟,给出偏转系统的消色散传输条件,并且分析了束流包络在偏转系统和出口管道中的变化情况。经过分析对比,详细列出了三种结构的优势与劣势。双磁铁不对称结构适用于医用加速器,三块90°磁铁偏转结构适用于需要在出口长距离漂移的辐照加速器,而70°+130°+70°偏转结构可以满足出口一定距离的无损漂移,同时实现相对较低的成本,是工业辐照加速器较为经济适宜的选择。     

Electric field simulation and measurement of a pulse line ion accelerator

An oil dielectric helical pulse line to demonstrate the principles of a Pulse Line Ion Accelerator (PLIA) has been designed and fabricated. The simulation of the axial electric field of an accelerator with CST code has been completed and the simulation results show complete agreement with the theoretical calculations. To fully understand the real value of the electric field excited from the helical line in PLIA, an optical electric integrated electric field measurement system was adopted. The measurement result shows that the real magnitude of axial electric field is smaller than that calculated, probably due to the actual pitch of the resister column which is much less than that of helix.     

Electromagnetic simulation study of dielectric wall accelerator structures

Two types of dielectric wall accelerator (DWA) structures, a bi-polar Blumlein line and zero integral pulse line (ZIP) structures were investigated. The high gradient insulator simulated by the particle in cell code con rms that it has little in uence on the axial electric field. The results of simulations using CST microwave studio indicate how the axial electric field is formed, and the electric eld waveforms agree with the theoretical one very well. The in uence of layer-to-layer coupling in a ZIP structure is much smaller and the electric eld waveform is much better. The axial of the Blumlein structure's electric field has better axial stability. From both of the above, it found that for a shorter pulse width, the axial electric field is much higher and the pulse stability and delity are much better. The CST simulation is very helpful for designing DWA structures.     

电子束在α-磁铁模型中传输模拟与优化

在电子直线加速器设计中,α-磁铁通常被用来压缩脉冲长度,采用热阴极微波电子枪和α-磁铁相结合的设计,可以获得皮秒或亚皮秒量级脉冲长度的电子束。电子束在α-磁铁中的传输过程较为复杂,相关文献介绍的研究成果均是基于理想模型,且有镜板开孔的α-磁铁的束流传输研究,对α-磁铁的使用具有重要的指导作用。本文首先简单介绍了用于高能电子成像装置的α-磁铁模型的设计,对电子束在理想模型与α-磁铁模型中传输模拟结果进行对比分析,验证了所构建模型可以有效地实现脉冲纵向压缩的结论。此外,对以优化角度进入α-磁铁和在空间电荷效应影响下的单束团及多束团束流动力学模拟结果进行了讨论,提出通过减小入射角度来补偿α-磁铁镜板上的束流进出孔对束流传输影响的方案。通过在α-磁铁与电子枪之间增加四极磁铁组,优化了束流发射度和束团尺寸。     

高能电子成像暗场成像技术特性研究及改进方案

基于EGS5与PARMELA模拟软件组成的高能电子成像系统,对暗场成像的模拟研究发现,通过调节光阑位置实现的暗场成像结果存在失真现象。针对该失真现象提出的改进方案,消除了暗场成像结果的失真。通过对40 MeV电子透射7~224 μm的铝样品开展的成像模拟结果表明:40 MeV高能电子暗场成像技术在铝样品厚度小于25 μm情况下具有明显的面密度分辨优势,且空间分辨率达到μm量级,非常适用于高能量密度物质诊断。     

Areal density and spatial resolution of high energy electron radiography

Ultrafast imaging tools are of great importance for determining the dynamic density distribution in high energy density(HED) matter. In this work, we designed a high energy electron radiography(HEER) system based on a linear electron accelerator to evaluate its capability for imaging HED matter. 40 MeV electron beams were used to image an aluminum target to study the density resolution and spatial resolution of HEER. The results demonstrate a spatial resolution of tens of micrometers. The interaction of the beams with the target and the beam transport of the transmitted electrons are further simulated with EGS5 and PARMELA codes, with the results showing good agreement with the experimental resolution.Furthermore, the experiment can be improved by adding an aperture at the Fourier plane.     

325 MHz微波栅控高压型热阴极电子枪的设计研究

高重复频率、高平均流强的电子枪具有十分广泛的应用。设计了一台束团重复频率为325 MHz在CW模式工作的微波栅控高压型热阴极电子枪,并详细论述了该类型微波栅控电子枪的实验原理。在该类型电子枪的设计中,首先需要利用仿真模拟软件EGUN、POISSON（PoissonSuperfish）、GPT（General Particle Tracer）完成300 kV直流高压电子枪的结构设计,并进行束流动力学验证计算。为将微波馈入该直流电子枪的阴栅极之间,进行了该微波栅控电子枪的供电系统设计,完成了从射频功率源到同轴热阴极的阻抗匹配方案,设计了一种325 MHz双模式同轴供电器件,并进行了验证与分析。     

E-field measurement of a pulse line ion accelerator

The E-field of pulse line ion accelerator (PLIA) is unique with high frequency (～MHz), large magnitude (～MV/m), and limited measuring space (～cm). The integrated optical E-field sensor (IOES) has remarkable advantages and has been used for PLIA E-field measurement. Firstly, the transfer function of the IOES has been calibrated to ensure measurement accuracy. The time-domain response illustrates that the sensor has a fast dynamic performance to effectively follow a 4 ns rising edge. Then, the E-field distribution along the axis and near the insulator surface of the PLIA was measured, showing that propagation of the E-field is almost lossless and the E-field near the insulation surface is about 1.1 times larger than that along the axis, which is in accordance with the simulation result.     

冷链食品包装箱表面消毒灭菌小型电子帘加速器的研制

研制了冷链食品包装箱表面辐照消毒灭菌成套装置,重点针对装置的核心部件小型电子帘加速器进行设计和调试,应用E-gun电子束轨迹跟踪程序对加速器的束流光学进行了计算,合理设计了栅极和聚焦极形状,获得了对束流包络的理想控制,应用多物理场仿真软件CST进行高压结构优化,使电子帘阴极表面高压区电场分布均匀,降低了打火几率。对电子帘加速器进行了整机调试,针对调试中出现的高压打火现象进行了分析,并给出了结构优化设计方案,使得最终调试主要技术参数达到了140 keV/20 mA,束流不均匀度小于10%。通过了连续8 h稳定性运行测试,达到了工业加速器辐照应用标准。