Current leads for superconducting magnets of ADS injector I

In an ADS injector i, there are five superconducting magnets in each cryomodule. Each superconducting magnet contains a solenoid magnet, a horizontal dipole corrector （HDC）, and a vertical dipole corrector （VDC）. Six current leads will tm required to power the electrical circuits, from room temperature to the 2.1 K liquid helium bath： two leads carry 100 A current for the solenoid magnet while the other four carry 12 A for the HDC and the VDC. This paper presents the principle of current lead optimization, which includes the cooling methods, the choice of material and structure, and the issues for current lead integration.     

Field measurement for superconducting magnets of ADS injector Ⅰ

A superconducting magnet prototype for Accelerator Driven Sub-critical System Injection-Ⅰ had been designed and fabricated, and tested in a new made vertical Dewar in November 2012. Batch magnet production was processed after some major revision from the magnet prototype, they include: removing off the perm-alloy shield, extending the iron yoke, using thin superconducting wire, etc. The first one of the batch magnets was tested in the vertical Dewar at the Harbin Institute of Technologyin in September 2013. A field measurement was carried out at the same time by the measurement platform that was seated on the top of the vertical Dewar,the measurement results met the design requirements. This paper will present the field measurement system design, measurement results and discussion on the residual field from the persistent current effect.     

Physical design of superconducting magnet for ADS injection Ⅰ

A superconducting solenoid prototype magnet for Accelerator Driven Subcritical System (ADS) Injection Ⅰ has been designed and fabricated, which has also been tested in a liquid Helium state inside a vertical Dewar in the Haerbin institute of Technology in November 2012. The design current was 210 A, when the test current reached 400 A no quench occurred so the solenoid magnet was forced to quench by the embedded heaters. The integral field strength, leakage field at the nearby upstream and downstream superconducting spoke cavities all meet the design requirements. At the same time, it also checked the reliability of the vertical test Dewar and the quenched detection system. The superconducting prototype magnet has accumulated valuable experiences for the coming batch magnets production and cryogenic test.     

Current leads for superconducting magnets of ADS injector Ⅰ

In an ADS injector Ⅰ, there are five superconducting magnets in each cryomodule. Each superconducting magnet contains a solenoid magnet, a horizontal dipole corrector (HDC), and a vertical dipole corrector (VDC). Six current leads will be required to power the electrical circuits, from room temperature to the 2.1 K liquid helium bath: two leads carry 100 A current for the solenoid magnet while the other four carry 12 A for the HDC and the VDC. This paper presents the principle of current lead optimization, which includes the cooling methods, the choice of material and structure, and the issues for current lead integration.