具身学习视角下的教学环节再思考——以“全等三角形判定”第1课时为例

《义务教育数学课程标准(2011年版)》(以下简称《课标》)指出,数学教学活动,特别是课堂教学应激发学生兴趣,调动学生积极性,引发学生的数学思考,鼓励学生的创造性思维.这就要求教师在设计教学环节时,以学生经验为逻辑起点,以学生经验生长为目的,重视学生的多感官参与,拒绝单一的听中学,创设环节帮助学生体悟学习过程,关注学生的学习过程,具身学习正是通过身体的感觉运动系统与周围环境的互动,促使学习者的认知、心理和情感水平发生变化,为我们提供了一个引导学生学习方式转型的新视角。     

Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

超导离子源铌三锡六极线圈镜像磁场约束结构的优化设计

中国科学院近代物理研究所正在进行国际首台45 GHz全铌三锡超导离子源FECR(Fourth Electron Cyclotron Resonance)磁体的研制，该离子源磁体线圈由六个铌三锡超导六极线圈和四个铌三锡超导螺线管线圈组成。由于单根超导线绕制异形六极线圈(非标准鞍型)技术难度大，且铌三锡超导性能对应力敏感，为了测试单个铌三锡六极线圈性能能否达到设计指标，基于铝合金壳层结构和Bladder-Key精确预紧技术，设计了镜像磁场约束结构。本工作主要阐述了运用ANSYS参数化设计编程对镜像磁场结构进行优化设计的过程和优化后的镜像磁场结构，确定了室温预应力大小，并给出了线圈经过室温预紧、冷却降温和加电励磁后的最大等效应力。进一步结合实际六极线圈制作公差(±0.1 mm)，分析和评估了公差对镜像磁场结构中六极线圈预应力施加的影响。     

电化学还原二氧化碳合成碳材料电催化还原氧气合成过氧化氢北大核心CSCD

研究了3种不同阳极(铜丝,镀锌铁丝和镍丝)材料对在熔盐中电化学还原CO_(2)制备的碳材料结构和形貌的影响,并探究了制备的3种碳材料,中空四面体碳(HQC,Cu作为阳极时的还原产物)、碳纳米片(CNS,Fe作为阳极时的还原产物)和海绵状多孔碳(SPC,Ni作为阳极时的还原产物),对2电子氧还原反应(2e;ORR)的电催化性能。研究表明,使用镀锌铁丝作为阳极材料制备的CNS由大量的碳纳米片构成,且该纳米片上具有丰富的孔洞结构以及较大的I_(D)/I_(C)(Raman光谱中D峰与G峰的强度之比,其比值反映材料的缺陷程度)值(0.996)。与HQC和SPC相比,CNS表现出最高的2e;ORR电催化活性和H_(2)O_(2)选择性(接近90%)。CNS的高活性和高选择性归因于其高的I_(D)/I_(C)值和高C—O/C=O比值,说明结构缺陷和C—O/C=O官能团对CNS催化性能至关重要。此外,CNS还具有非常优异的电催化稳定性,在长达14 h的恒电压电化学催化测试后,环电流几乎无衰减。这种以CO_(2)为碳源合成可用于电催化合成过氧化氢(H_(2)O_(2))的碳材料的方法,不仅可以作为缓解温室效应的潜在选项,也为CO_(2)衍生碳的实际应用提供了新的思路。     

基于连续流技术的三苯甲醇合成实验

三苯甲醇的制备实验是化学相关专业的经典教学实验,是有机化学理论与实践操作重要的结合点。然而,实验装置复杂、格氏试剂引发较为困难、严苛的无水无氧操作等导致实验成功率较低;反复转移溶剂导致师生的溶剂暴露。基于上述问题,本文利用中压柱塞泵和固定床连续流反应器,设计并搭建了格氏试剂连续流动制备装置,实现了三苯甲醇的连续制备。基于连续流的格氏试剂制备装置设备搭建简单,全程避免了师生的有机溶剂暴露,溴苯-格氏试剂转化率重现性好。在本连续流装置内,格式试剂制备反应稳定可控,实验安全性高。过量镁屑无需淬灭,可重复使用。     

AM/AA/APEG/NANB共聚物的合成与性能研究

通过丙烯酰胺(AM),丙烯酸(AA),烯丙醇聚氧乙烯醚(APEG)和N,N-二烯丙基苄胺(NANB)制备共聚物P(AM/AA/APEG/NANB)。确定了最佳反应条件:m(AM)∶m(AA)=6.5∶3,APEG为5 wt%,NANB加量0.2 wt%,pH为7,反应温度40℃,引发剂0.4 wt%。通过IR和1H NMR确定了聚合物的分子结构,并对其进行性能测试。结果表明:2000 mg·L-1的AM/AA/APEG/NANB溶液具有较好的流变性能(120℃,粘度保留率:38.56%;1000 s-1,粘度保留率:17.93%)和抗盐性能(20 000 mg·L-1Na Cl,2000 mg·L-1Mg Cl2或Ca Cl2,粘度保留率分别为22.14%、18.34%和15.33%),且提高采收率可达16.12%。     

用胞映射方法讨论GKDV方程全局吸引域

本文用胞映射方法画出了GKDV方程未受扰系统和受扰系统的全局吸引域、r步吸引域。     

影响分子沉积膜纳米摩擦特性的几个因素

利用原子力显微镜探讨了表面电荷及分子端基对分子沉积膜纳米摩擦特性的影响，并考察了表面形貌在不同扫描方向和法向高度上对摩擦力的影响．结果表明：对Si3N4针尖而言，表面净电荷对摩擦特性有一定的影响，不同类型的表面电荷对摩擦力和摩擦系数的影响不同，正电荷影响相对较大；在较小载荷和粘附力的条件下，针尖在表面上滑动时所受的摩擦作用同分子端基有关；单层CuTsPc分子沉积膜表面形貌的取向对摩擦力影响不大，分子沉积膜的表面高度同摩擦力，即时测量值并不存在对应关系，摩擦力受表面形貌的影响较小．     

水平成层介质中粘弹性波的计算

本文提出了一种水平成层介质中弹性波粘弹性波计算的新方法，分别研究了线源和点源作用情况。该方法适用于各种粘弹性模型，数值计算简单，可模拟任意震源及所产生的各种体波，面波，数值结果表明具有很高的计算精度和计算效率。     

A corresponding-state approach to quark-cluster matter

The state of super-dense matter is essential for us to understand the nature of pulsars; however, non- perturbative quantum chromodynamics makes it very difficult to make direct calculations of the state of cold matter at realistic baryon number densities inside compact stars. Nevertheless, from an observational point of view, it is conjectured that pulsars could be made up of quark clusters since the strong coupling between quarks might render the quarks to be grouped in clusters. In this paper, we attempt to find an equation of state of condensed quark-cluster matter in a phenomenological way. Supposing that the quark-clusters could be analogized to inert gases, we apply here the corresponding-state approach to derive the equation of state of quark-cluster matter, as was similarly demonstrated for nuclear and neutron-star matter in the 1970s. According to the calculations that we have presented, the quark-cluster stars, which are composed of quark-cluster matter, could have a high maximum mass that is consistent with observations and, in turn, further observations of pulsar mass could also place a constraint on the properties of quark-cluster matter. We will also briefly discuss the melting heat during the solid-liquid phase conversion and its related astrophysical consequences.