40Ar+诱导无定形碳到金刚石纳米晶相变的研究

通过60 keV的⁴⁰Ar⁺辐照无定形碳靶合成了大量尺寸不同的金刚石纳米颗粒.高分辨透射电子显微镜配合能量色散X射线谱和电子衍射以及Raman谱分析的结果表明，这些嵌于具有扰动石墨结构薄膜中的纳米金刚石颗粒，其成核率很高(约为10¹³/cm²)，而且可以生长到较大的尺寸，有的甚至可以达到微米量级.对其相转变过程也进行了初步探讨. 关键词： 离子束 金刚石纳米晶 相变 透射电子显微镜     

Photonic Band Gap Properties of Three-Dimensional SiO2 Photonic Crystals

Three-dimensional SiO2 photonic crystals （PhCs） are fabricated on quartz substrates by the vertical deposition method. Scanning electron microscopy measurement reveals that the samples exhibit an ordered close-packed arrangement of SiO2 spheres. It is found that the position of the [111] photonie band gap （PBG） shifts to a long wavelength （red shift） with increasing sphere size. Gap broadening effects are observed due to the presence of defects in the samples. Moreover, the optical properties of the PBG are very sensitive to the annealing temperature. Our results indicate that the optical properties of the PBG can be easily tuned in the visible region by appropriate experimental parameters, which will be useful for practical applications of PhC optical devices.     

Controlled Evolution of Silicon Nanocone Arrays Induced by Ar+ Sputtering at Room Temperature

Controlled evolution of silicon nanocone arrays induced by Ar^＋ sputtering at room temperature, using the coating carbon as a mask, is demonstrated. The investigation of scanning electron microscopy indicates that the morphology of silicon nanostructures can be controlled by adjusting the thickness of the coating carbon film. Increasing the thickness of the coating carbon film from 50-60 nm, 250-300 nm and 750-800 nm to 1500 nm, the morphologies of silicon nanostructures are transformed from smooth surface ripple, coarse surface ripple and surface ripple with densely distributed nanocones to nanocone arrays with a high density of about 1 × 10^9- 2 × 10^9 cm^-2.     

可膨胀管技术应用与研究

可膨胀管(SET)工艺是国外开发的一项新技术,采用膨胀锥通过钢管就地膨胀,从而使钢管内径减小最少。于上世纪九十年代由皇家荷兰壳牌石油公司提出的技术设想,并且目前被广泛用于石油勘探作业中,对于是有挖掘与开采工业有巨大的应用价值。本文从可膨胀管技术原理分析为基础,研究其在目前相关领域的应用情况。     

40Ar+诱导无定形碳到金刚石纳米晶相变的研究

通过60keV的 40Ar+辐照无定形碳靶合成了大量尺寸不同的金刚石纳米颗粒.高分辨透射电子显微镜配合能量色散X射线谱和电子衍射以及Raman谱分析的结果表明,这些嵌于具有扰动石墨结构薄膜中的纳米金刚石颗粒,其成核率很高(约为1013 /cm2),而且可以生长到较大的尺寸,有的甚至可以达到微米量级.对其相转变过程也进行了初步探讨.     

低能氩离子束对多孔铝阳极氧化膜表面的刻蚀效应研究

用低能氩离子束(Ar⁺)处理了多孔铝阳极氧化膜(AAO)表面.扫描电子显微镜和原 子力显微镜结果表明，Ar⁺束刻蚀不仅可以有效地去除AAO反面阻挡层，还可使A AO表面产生多种特殊的形貌，如采用倾角入射可使其表面产生波纹，倾角入射同时旋转样品 台，可实现表面抛光.并结合Bradley和Harper提出的无定形材料表面波纹的形成和演化理论 解释了AAO表面波纹的特征. 关键词： 多孔铝阳极氧化膜 离子束刻蚀