ICP-MS法测定食品中微量~(99)Tc

针对食品样品中微量锝的检测,建立了一种高效、定量分离99Tc,并能有效除去钼、钌的方法。方法采用聚乙二醇-4000涂覆的C18-U柱分离锝、钼和钌,用2 mol/L碳酸钠溶液体系上柱后,去离子水洗脱吸附在柱上的锝。该方法对99Tc的平均回收率为100%,钼的去污因子为1.3×104,钌的去污因子为6.2×103。99Tc采用质谱法测量。方法用于食品中99Tc的检测,99Tc含量在1~20 ng/kg干样之间。     

新型反相/强阴离子交换混合模式材料用于磷酸化肽富集

建立了新型反相/强阴离子交换混合模式材料(C18/SAX)的磷酸化肽富集方法.考察了流动相组成(乙腈浓度、甲酸浓度、缓冲盐浓度)对酪蛋白(α-Casein)酶解液中磷酸化肽分离选择性的影响.实验结果表明,磷酸化肽在C18/SAX上的保留行为受疏水和离子交换作用力的共同调控,单磷酸化肽先于多磷酸化肽从材料上洗脱出来.随着甲酸浓度增加,磷酸化肽的保留减弱;随着盐浓度增加,磷酸化肽保留变小.采用优化后的流动相,建立以20％ ACN/20 mmol/L NH4Ac作为上样溶液,20％ ACN/0.1％ FA和50％ ACN/100 mmol/L NH4Ac/2％ FA分别作为洗脱液分段洗脱单、多磷酸化肽的方法.以α-Casein和人血清白蛋白(HSA)酶解液的混合溶液(1∶20,n/n)作为模拟样品,实现了单、多磷酸化肽的同时富集和分段洗脱,分别检测到4条单磷酸化肽和14条多磷酸化肽的信号.将本方法用于牛奶中的磷酸化肽检测,共鉴定到4条单磷酸化肽和8条多磷酸化肽信号.结果表明,本富集方法选择性高,有良好的应用前景.     

非贵金属Co-N-C/MgO高效催化糠醛氧化酯化制糠酸甲酯

设计开发绿色、可持续的生物质资源高效转化制化学品催化过程具有重要的科学与应用研究价值.生物质基平台分子糠醛在分子氧存在下与甲醇发生氧化酯化,提供了一条糠酸甲酯的"非石油基"合成新路线.该反应采用贵金属/非贵金属催化体系,目前通常需要引入K2CO3或CH3ONa等碱性添加剂,以提高催化氧化酯化反应活性和选择性;但是存在活性组分流失、生成副产物及污染环境等问题,阻碍了其进一步应用.探索高性能非贵金属催化剂,实现无碱条件下糠醛高效氧化酯化,对于提高该生物质路线竞争力与推动工业化进程具有重要意义.     

高压下Li掺杂p型ZnO固溶体的表征

报道了利用ZnO和Li₂O混合物在5GPa, 1200 ℃—1500 ℃条件下, 制备Li掺杂p型ZnO(记作ZnO: Li)固溶体的过程. 研究发现, 高压下温度对于ZnO: Li固溶体的导电类型以及结构具有较大的影响. 其中在1500 ℃条件下烧结的ZnO: Li(Li的掺杂量4.5%)表现出良好的p型电学性能, 其电阻率为3.1× 10^-1Ω·cm, 载流子浓度为3.3× 10¹⁹cm^-3, 迁移率为27.7cm²·V^-1·s^-1. 通过实验及理论计算确定了其受主能级为110meV, 讨论了压力对p型ZnO的形成和电学性能的影响.     

Thermodynamics and elastic properties of Ta from first-principles calculations

<正>Within the framework of the quasiharmonic approximation,the thermodynamics and elastic properties of Ta, including phonon density of states(DOS),equation of state,linear thermal expansion coefficient,entropy,enthalpy, heat capacity,elastic constants,bulk modulus,shear modulus,Young’s modulus,microhardness,and sound velocity, are studied using the first-principles projector-augmented wave method.The vibrational contribution to Helmholtz free energy is evaluated from the first-principles phonon DOS and the Debye model.The thermal electronic contribution to Helmholtz free energy is estimated from the integration over the electronic DOS.By comparing the experimental results with the calculation results from the first-principles and the Debye model,it is found that the thermodynamic properties of Ta are depicted well by the first-principles.The elastic properties of Ta from the first-principles are consistent with the available experimental data.     

碳纳米管在高压下的电学性质与状态方程

 在金刚石压砧装置上，采用电阻测量方法研究了多层碳纳米管在室温下、23 GPa内的电阻与压力的关系。实验结果表明，在1.5～4.6 GPa内，电阻急剧减小，而在5.7 GPa左右，电阻出现一个极大值。这些变化与碳纳米管的结构、形状和层间距离的变化有关。同时，还在活塞-圆筒式p-V关系测量装置上首次研究了多层碳纳米管在室温下、4.5 GPa内的p-V关系，给出了它在第一次和第七次压缩时的状态方程。     

抗坏血酸与腺嘌呤和尿嘧啶的相互作用研究

使用循环伏安法、密度泛函理论及自然键轨道分析,分别研究了抗坏血酸与腺嘌呤、尿嘧啶的相互作用。两种混合体系在水溶液及PBS缓冲溶液中的电化学实验结果表明:腺嘌呤氨基上的氢原子、嘌呤环上的氮及氢原子,尿嘧啶羰基上的氧原子及氮上氢原子,均可与抗坏血酸烯二醇羟基上的氢原子及羰基上的氧原子形成氢键。氢键的形成,使抗坏血酸的电化学氧化过程难以进行。理论计算也进一步证明了上述混合体系中氢键作用的存在。     

萃取色层-ICP-MS法测定金属钚中杂质元素

采用HNO_3(1+1)和少量HF溶解金属钚,建立了利用TEVA(三烷基甲基胺盐,烷基为C8-C10)分离大量Pu中微量Zr等杂质元素,ICP-M S分析的方法。采用H_2O_2调节Pu的价态,样品在3 mol/L HNO3上柱-3 mol/L HNO_3淋洗Zr等杂质元素,并利用ICP-MS测量了分离后样品中Zr,Mo,Ru等杂质元素的含量。结果表明,Pu的去污系数达到104,Zr等24种杂质元素加标回收率多为90%~115%,相对标准偏差优于15%(n=6),方法的检测限为0.2~150 ng/g(以Pu计)。     

“PPAS” X-RAY ABSORPTION SPECTROSCOPY IN LASER-PRODUCED ALUMINUM PLASMA

We have developed and successfully demonstrated the "point projection absorption spectroscopy (hereafter abbreviated to PPAS)" technique to record keV X-ray absorption spectra in the coronal region of laser produced aluminum plasma which provides spatial information in the corona. Absorption spectrum of the Al Ⅻ 1s²-1s2p resonant line for time delays up to 250, 500 and 750 ps after the peak of the incident laser pulse have been observed. Analysis of an absorption spectrum should allow a high spatial resolution (< 25μm) history of the absorbing ion population density to be determined. The 1-D hydro-code JB19 has been used to simulate the experiment and the predictions are compared to the observations. Such comparison can be useful in validating parts of the codes used for gain prediction on recombination X-ray laser transitions.     

A rapid and convenient experimental method of absolutely calibrating transmission of x-ray flat-response filter

We develop a rapid and convenient experimental method of absolutely calibrating the transmission of an x-ray flatresponse filter. The calibration experiment is performed on a small laser-target facility, and a set of high resolution holographic flat-field grating spectrometers is used as a discrimination system of the laser-produced x-ray source. Given that the holographic flat-field grating has a relatively large width, the grating is divided into two regions for use in that direction,where one region has the filter added and the other region does not. The filter transmission is determined by dividing the x-ray signal counts detected when the filter is in the line of sight by those detected when the filter is out of the line of sight.We find that the calibration results of this experiment agree with the calibration results using a synchrotron radiation source,as well as simulation results. Our method is not only highly reliable but also rapid and convenient.