高超声速平板边界层流动显示的试验研究

本文在高超声速脉冲式风洞内对基于纳米示踪的平面激光散射技术(nano-based planar laser scattering, NPLS)的应用进行了探索, 并在此基础上对平板边界层流动结构的精细测量进行了研究. 试验来流Ma=7.3, 总压4.8 MPa, 总温680 K. 通过时序的分析和调试, 对各分系统实现了高精度的同步控制; 定量的粒子注入及混合, 实现了粒子的均匀撒播, 对主流获得了均匀的显示效果; 对于边界层流动, 获得了精细的瞬态流动结构图像, 显示了层流到湍流的转捩过程, 并分析了其时空演化特性.     

Temporal evolution of optical path difference of a supersonic turbulent boundary layer

The density distribution of a supersonic turbulent boundary layer is measured with the nanoparticle-based planar laser scattering technique, and the temporal evolution of its optical path difference (OPD) in a short time interval is characterized by proper orthogonal decomposition (POD). Based on the advantage of POD in capturing the energy of a signal, a temporal evolution model is suggested for the POD coefficients of OPD. In this model, the first few coefficients vary linearly with time, and the others are modeled by Gaussian statistics. As an application, this method is used to compute the short-exposure optical transfer function.     

Experimental study on supersonic film cooling on the surface of a blunt body in hypersonic flow

The experimental study focuses on the heat flux on a double cone blunt body in the presence of tangential-slot super- sonic injection into hypersonic flow. The tests are conducted in a contoured axisymmetric nozzle with Mach numbers of 7.3 and 8.1, and the total temperature is about 900 K. The injection Mach number is 3.2, and total temperature is 300 K. A constant voltage circuit is developed to supply the temperature detectors instead of the normally used constant current circuit. The schlieren photographs are presented additionally to visualize the flow and help analyze the pressure relationship between the cooling flow and the main flow. The dependence of the film-cooling effectiveness on flow parameters, i.e. the blow ratio, the convective Mach number, and the attack angle, is determined. A semi-empirical formula is tested by the present data, and is improved for a better correlation.     

二维高超声速后台阶表面传热特性实验研究

高超声速后台阶流动是大气层内高速飞行器发动机设计、表面热防护以及高超声速拦截器红外成像窗口气动光学效应校正等诸多先进高超声速技术研发过程中所涉及的一类基础流动问题. 研究高超声速后台阶流动特性对有效提升飞行器综合性能, 进一步掌握高超声速流动机理具有重大基础 意义. 本文以二维高超声速后台阶流动为研究对象, 在KD-01高超声速激波风洞中测量了二维后台阶模型表面传热系数和表面静压, 并将实测台阶下游表面传热系数分布同采用高超声速边界层理论所得估计值进行了比较. 为进一步验证实验结果, 使用NPLS技术测量了其中一种实验状态下台阶周围流动结构. 研究发现, 对于二维高超声速后台阶流动, 台阶下游表面传热分布受台阶处边界层外缘流动特性的直接影响; 在台阶下游分离区和再附区内, 气体黏性占主导作用; 在台阶下游远场区域, 边界层流动特性趋同于平板边界层; 下游边界层基本结构取决于台阶处边界层相对厚度. 对高超声速后台阶流动, 若使用数值模拟方法研究气动热问题, 应当使用湍流模型.     

基于NPLS技术的可压缩湍流机理实验研究新进展

可压缩湍流机理的实验研究是一件难度很大的工作, 其主要的难度在于高时空分辨率的可压缩湍流结构非接触精细测试技术和低噪声的高速风洞设备技术. 近几年来, 由于在低噪声的超声速、高超声速风洞研究和可压缩流动精细结构测量技术研究方面取得的重要进展及其在可压缩湍流机理研究方面的应用, 超声速流动转捩与湍流的机理研究取得了较大的进展. 本文介绍了最近几年高速流动非接触精细测试技术, 尤其是基于纳米粒子的平面激光散射技术(nano-tracer planar laser scattering, NPLS)、背景导向纹影技术(background oriented schlieren, BOS) 和超声速流场的粒子图像测速技术(particle image velocimetry, PIV)的研究进展和发展前景, 以及基于这些技术, 在可压缩湍流机理实验研究方面的进展和发展前景, 其中包括在超声速混合层转捩、超声速绕流与尾流结构、超声速边界层转捩、激波边界层干扰等典型流场的机理研究方面, 以及气动光学机理研究方面的研究进展. 最后, 展望了目前湍流机理实验研究对湍流工程模型研究的可能贡献.      

带喷流超声速后台阶流场精细结构及其运动特性研究

采用基于纳米示踪的平面激光散射技术(NPLS)对带超声速喷流的后台阶流动精细结构进行了研究. 来流马赫数为3.4, 喷流实测马赫数为2.45, 而名义马赫数为2.5. 结果清晰地揭示了激波、剪切层、混合层、Kelvin-Helmholtz涡、羊角涡及湍流大尺度结构等大量典型流场结构. 基于大量流场精细结构图像, 对典型位置处的结构进行了空间两点相关性分析, 在喷流混合层前端涡结构小于湍流充分发展的尾端, 结构角相对也小. 喷流工作时, 模型台阶下游表面由一薄层气膜覆盖. 获得了模型流向和不同高度展向平面内的流场结构, 对照纹影试验结果, 分析了流动特点及时间演化规律. 采用微型压力扫描系统测试了模型表面的压力系数分布, 靠近喷流下游处压力系数区域0.0146. 针对NPLS图像做了流动的分形维数的分析, 发现在流动初始阶段分形维数接近于1, 越靠下游分形维数越高.     

强梯度复杂流场中的粒子动力学响应试验研究

示踪粒子在(高)超声速流场中的动力学响应是粒子成像测速等粒子示踪测量技术的关键问题之一.现有文献对粒子动力学响应的试验测量往往是通过单个斜激波响应的测量方法.然而,当示踪粒子用于测量高速飞行器发动机内部复杂的激波串流场时,粒子将经历由多道激波导致的速度、压力、黏性等剧烈变化.本文结合目前(高)超声速飞行器的研究热潮,重点关注示踪粒子在应用于发动机内部具有连续激波的复杂流场测量中存在的跟随性评估方面,开展了一系列的相关试验研究.包括测量超声速风洞的喷管出口速度分布以验证测试系统的性能,在马赫4.2和3.0流场中测量了粒子对二维10°和15°单斜劈绕流中的斜激波动力响应,并测量了模拟发动机内部连续梯度的双斜劈粒子斜激波动力响应.结合粒子动力学的理论模型,得到了各状态的粒子弛豫时间、弛豫距离、Stokes数.基于图像方法、统计学规律分析了激波非定常抖动对测量结果的影响,并对测量结果进行了修正.结果显示,相同斜劈角度下,马赫数越高,粒子的弛豫时间、弛豫距离就越大.但是在相同的来流马赫数下,斜劈角度越大,粒子的弛豫时间、弛豫距离反而减小.在强梯度之后由于流场的雷诺数和黏性系数变化剧烈,粒子的跟随性降低了大约5.7%,stokes数增加了约1%.虽然在本文条件下Stokes数仍满足超声速流场对粒子跟随性的要求,但粒子响应的降低无疑是值得关注的,尤其是当其被应用于具有更多连续梯度的复杂流场测量中.     

Experimental studies on flow visualization and velocity field of compression ramp with different incoming boundary layers

Experimental studies which focus on flow visualization and the velocity field of a supersonic laminar/turbulent flow over a compression ramp were carried out in a Mach 3.0 wind tunnel. Fine flow structures and velocity field structures were obtained via NPLS （nanoparticle-tracer planar laser scattering） and PIV （particle image velocimetry） techniques, time- averaged flow structures were researched, and spatiotemporal evolutions of transient flow structures were analyzed. The flow visualization results indicated that when the ramp angles were 25~, a typical separation occurred in the laminar flow, some typical flow structures such as shock induced by the boundary layer, separation shock, reversed flow and reattachment shock were visible clearly. While a certain extent separation occurred in turbulent flow, the separation region was much smaller. When the ramp angles were 28~, laminar flow separated further, and the separation region expanded evidently, flow structures in the separation region were complex. While a typical separation occurred in turbulent flow, reversed flow structures were significant, flow structures in the separation region were relatively simple. The experimental results of velocity field were corresponding to flow visualization, and the velocity field structures of both compression ramp flows agreed with the flow structures well. There were three layered structures in the U component velocity, and the V component velocity appeared like an oblique ＂v＂. Some differences between these two compression ramp flows can be observed in the velocity profiles of the shear layer and the shearing intensity.     

Temporal evolution of the optical path difference of a supersonic turbulent boundary layer

The density distribution of a supersonic turbulent boundary layer is measured with the nanoparticle-based planar laser scattering technique, and the temporal evolution of its optical path difference (OPD) in a short time interval is characterized by proper orthogonal decomposition (POD). Based on the advantage of POD in capturing the energy of a signal, a temporal evolution model is suggested for the POD coefficients of the OPD. In this model, the first few coefficients vary linearly with time, and the others are modeled by Gaussian statistics. As an application, this method is used to compute the shortexposure optical transfer function.     

基于流动显示的压缩拐角流动结构定量研究

在Ma = 3.0的超声速风洞中, 采用NPLS技术对上游边界层为层流的25° 压缩拐角进行了流动显示实验, 获得了压缩拐角的精细流动结构, 边界层、剪切层和激波等结构清晰可见. 基于流动显示数据, 采用间歇性、空间相关性和分形分析对流动结构进行了定量研究, 计算了边界层和分离区的间歇因子分布, 获取了边界层中拟序结构和结构角的大小, 给出了边界层分形维数的分布, 并与Ringuette和Bookey等的实验结果进行比较, 阐述了压缩拐角流动结构的定量特征.